The Journal of Korea Institute of Information, Electronics, and Communication Technology (한국정보전자통신기술학회논문지)

Korea Information Electronic Communication Technology (한국정보전자통신기술학회)
권호 표지
DOI QR코드

DOI QR Code

Performance Analysis of Electronic Control System for Weeding Implement such as Slope Land

경사지 제초 작업기의 전자제어시스템 성능분석

  • Park, Won-Yeop (Department of Mechanical Engineering, Hankyong National University) ;
  • Hong, Sung-Ha (Department of Biomechatronics, Sungkyunkwan University) ;
  • Lee, Jae Min (Division of Electronic Information and Communication, Catholic Kwandong University) ;
  • Lee, Sang-Sik (Department of Biomedical Engineering, Catholic Kwandong University)
  • Received : 2015.06.05
  • Accepted : 2015.06.10
  • Published : 2015.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study was conducted to develop electronic control system of weeding implement that can operated at various areas such as slope land and inclined road side. The weeding implement consists of five main parts; the electronic control system, the hydraulic system, the main frame, the boom and arm mechanism, and the rotary type weeder. And the weeding implement was developed to be attached by three-point hitch of tractor considering the use of electronic control system. As a result, the electronic control test was conducted with the weeding implement attached to tractor in slope land. The results of the electronic control system test showed satisfactory weeding performance.

본 연구는 이러한 경사 토지와 경사진 도로 측면 등 다양한 영역에서 작동하는 캔을 구현 잡초의 전자 제어 시스템을 개발 하였다. 잡초 구현은 다섯 가지 주요 부분으로 구성 전자 제어 시스템, 유압 시스템, 메인 프레임, 붐 및 팔을 이용하는 기계와 회전형 제초기. 그리고 잡초는 전자 제어 시스템의 사용을 고려 트랙터의 3 점 히치 의해 부착될 수 있도록 개발되었다 구현한다. 그 결과, 전자 제어 시험 제초 구현 경사 땅 트랙터에 장착하여 실시했다. 전자 제어 시스템의 테스트 결과가 만족 제초 성능을 보여 주었다.

Keywords

References

  1. Lee S. S. and W. Y. Park. 2011. Development of Tractor Three-point Hitch Control System using Proportional Valve. J. of Biosystems Engineering 36(2):89-95 (In Korean). https://doi.org/10.5307/JBE.2011.36.2.89
  2. Lee S. S. and W. Y. Park. 2011. Electro-hydraulic Characteristic Analysis of Arm-type Implement for Three-point Hitch. J. of Biosystems Engineering 36(5):314-318 (In Korean). https://doi.org/10.5307/JBE.2011.36.5.314
  3. Jang I. J., T. S. Kim, J. R. Son and C. Y. Bae. 2006. Development of a Mower Attachable Hydraulic Boom for Tractor. J. of Biosystems Engineering 31(4):334-341 (In Korean). https://doi.org/10.5307/JBE.2006.31.4.334
  4. Gilfillan G. 1970. Tractor behavior during motion uphill(I), J. Agr Eng. Res. 15(3):221-235. https://doi.org/10.1016/0021-8634(70)90118-6
  5. Gilfillan G. 1970. Tractor behavior during motion uphill(II), J. Agr Eng. Res. 15(3):236-243. https://doi.org/10.1016/0021-8634(70)90119-8
  6. Gibson H. C. , K. C. Elliott and S. P. E. Persson. 1971. Side slope stability of articulated-frame logging tractors, J. of Terramechanics, 8(2):65-79. https://doi.org/10.1016/0022-4898(71)90027-9
  7. Jung S. Y. and K. U. Kim. 1990. Simulation of Sideways Overturning of Agricultural Tractor - Trailer Systems, J. of Biosystems Eng., 15(4):298-309. (In korean)
  8. S. S. Lee, H. S. Sung, M. H. Heo, K. C. Nam, C. H. Lee, J. H. Hong and W. Y. Park. 2010b. Study on sideways overturning safety simulation of arm-type cultivator installed at the 3-P hitch of tractor, Proceeding of the KSAM 2010 Winter Conference, 15(1): 107-112. (In korean)
  9. Matsuyama Tatsuo, Ken Kawasaki and Kunihiko Maeoka. 1970. n the Side-overturning Angle of the Two Wheel Walking Tractor on Slope Land, J. of the Japanese Society of Agricultural Machinery, 32(1): 16-22.
  10. Lee S. S., J. H. Mun, H. S. Sung, M. H. Heo, D. H. Kang, C. H. Lee, J. H. Hong and W. Y. Park. 2010. Study on hydraulic system simulation of arm-type cultivator installed at the 3-point hitch of tractor, Proceeding of the KSAM 2010 Winter Conference, 15(1): 98-102. (In korean)