• Tribology and Lubricants
• /
• 제3권1호
• /
• pp.39-46
• /
• 1987

Frictional loss in turbulent regime is abnormally increased compared with in laminar regime. Thus the consideration of temperature rise across fluid film is significant in analysis and conventional isothermal theory loses its usefulness for performance prediction. This paper proposes to the three-dimensional thermohydrodynamic analysis of finite journal bearings operating under turbulent condition using two-equation model($\kappa-\varepsilon$ model) proposed by Hassid & Poreh. The equations are solved numerically by finite difference method. We make the analysis applicable even at large eccentricity when back flow of the lubricants occurs and axial flow is no longer ignored compared to circumferential flow.

• 한국재료학회지
• /
• 제18권11호
• /
• pp.592-596
• /
• 2008

Spring constants (displacement per unit applied load) of MEMS socket pins of given structures were computed by theoretical analysis and confirmed by the finite element method (FEM). In the theoretical analysis, the displacement of pins was calculated based on the 2-dimensional bending theory of the curved beam. For the 3-dimensional modeling, CATIA was used. After modeling, the raw data were transferred to ANSYS, which was employed in the 3-dimensional analysis for the calculation of the stress and strain and loaddisplacement The theoretical analysis and the FEM results were found to agree, with each showing the spring constants as 63.4 N/m within a reasonable load range. These results show that spring constants can be easily obtained through theoretical calculation without resorting to experiments and FEM analysis for simple and symmetric structures. For the some change of shape and structural stiffness, this theoretical analysis can be applied to MEMS socket pins.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.265-268
• /
• 2008

슬래브-기둥 접합부는 많은 구조물의 시공에 사용되고 있다. 그러나 횡하중을 받는 슬래브-기둥 접합부의 파괴거동 및 극한강도를 예측하는 것이 매우 어렵기 때문에 현행 구조물 설계기준은 횡하중을 받는 슬래브-기둥 접합부의 파괴 거동을 명확하게 설명하지 못하고 있다. 본 논문에서는 횡하중을 받는 슬래브-기둥 접합부의 극한해석과 설계를 위하여 응력교란영역을 가지는 3차원 구조의 해석과 설계를 위하여 제안된 3차원 격자 스트럿-타이 모델 방법을 파괴실험이 수행된 43개의 횡하중을 받는 슬래브-기둥 접합부의 극한강도 평가에 적용하고, ACI 318-05 기준과 FIB 1999 기준에 의한 극한강도 평가결과와 비교함으로써 3차원 격자 스트럿-타이 모델 방법의 타당성을 검토하였다.

• 반도체디스플레이기술학회지
• /
• 제3권4호
• /
• pp.29-32
• /
• 2004

Fully depleted Silicon-on-Insulator (FD-SOI) devices lead to better electrical characteristics than bulk CMOS devices. However, the presence of a thin top silicon layer and a buried SiO2 layer causes self-heating due to the low thermal conductivity of the buried oxide. The electrical characteristics of FDSOI devices strongly depend on the path of heat dissipation. In this paper, we present a new three-dimensional (3-D) analysis technique for the self-heating effect of the finger-type and bar-type transistors. The 3-D analysis results show that the drain current of the finger-type transistor is 14.7% smaller than that of the bar-type transistor due to the 3-D self-heating effect. We have learned that the rate of current degradation increases significantly when the width of a transistor is smaller that a critical value in a finger-type layout. The current degradation fro the 3-D structures of the finger-type and bar-type transistors is investigated and the design issues are also discussed.

• 지질공학
• /
• 제33권1호
• /
• pp.151-167
• /
• 2023

본 연구는 LNG저장탱크가 설치될 느슨한 포화사질지반을 대상으로 개정된 액상화 평가법과 UBC3D-PLM 모델을 이용한 1차원 유효응력해석에 의한 액상화 평가법을 비교한 것이다. 이를 위해 여러가지 실내 및 현장시험을 실시하여 필요한 Parameter를 산정하였다. 검토결과, 지진응답해석결과와 SPT N 값을 이용하는 개정 액상화 평가법은 액상화 발생 가능성을 높게 평가하였지만, 다양한 액상화 저항인자를 고려할 수 있는 유효응력해석법은 액상화에 다소 안정한 것으로 분석되었다. UBC3D-PLM 모델을 이용한 1차원 유한요소해석을 할 경우 보다 간편하게 액상화 안정성 검토가 가능하였고, 액상화 보강 영역을 최소화 할 수 있었다. 또한, LNG저장탱크의 기초를 고려한 2·3차원 수치해석 시에는 액상화 발생 시 내진설계 및 거동특성을 규명하는 것에 활용될 수 있을 것으로 기대된다.

• Interaction and multiscale mechanics
• /
• 제3권3호
• /
• pp.213-234
• /
• 2010

A multiscale method is presented for analysis of thin slab structures in which the microstructures can not be reduced to two-dimensional plane stress models and thus three dimensional treatment of microstructures is necessary. This method is based on the classical asymptotic expansion multiscale approach but with consideration of the special geometric characteristics of the slab structures. This is achieved via a special form of multiscale asymptotic expansion of displacement field. The expanded three dimensional displacement field only exhibits in-plane periodicity and the thickness dimension is in the global scale. Consequently by employing the multiscale asymptotic expansion approach the global macroscopic structural problem and the local microscopic unit cell problem are rationally set up. It is noted that the unit cell is subjected to the in-plane periodic boundary conditions as well as the traction free conditions on the out of plane surfaces of the unit cell. The variational formulation and finite element implementation of the unit cell problem are discussed in details. Thereafter the in-plane material response is systematically characterized via homogenization analysis of the proposed special unit cell problem for different microstructures and the reasoning of the present method is justified. Moreover the present multiscale analysis procedure is illustrated through a plane stress beam example.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.637-638
• /
• 2006

Different from the conventional motor, the superconducting motor has so large air-gap that the actual parameters such as excitation voltage have considerable difference from the values obtained from 2-dimensional electromagnetic analysis. This paper introduces 3-dimensional EMCH(Equivalent Magnetic Circuit Network) method or FLUX-3D FEM(Finite Element Method) software to reduce the error originated from the 2-dimensional electromagnetic analysis for the development of a 1 MW class high-temperature superconducting motor.

• 한국음향학회지
• /
• 제15권2호
• /
• pp.72-78
• /
• 1996

본 논문에서는 2차원 양방향 포물선 방정식 법과 푸리에 변환을 이용하여 3차원 굴절현상 및 3차원 후방 산란파를 포함하는 $2\frac12$차원 문제를 푸는 방법에 대해 다루었다. 여기서 $2\frac12$ 차원 문제란 2차원적 해양환경 하에 3차원적 음원이 존재할 경우를 의미한다. 2차원 양방향 포물선 방정식법은 수치기법으로 깊이 방향과 수평거리 방향에 대해 각각 Galerkin법과 Crank-Nicolson법을 사용하며 수직 불연속 경계면에 의한 후방 산란파를 포함한 수평거리 의존 문제에 대해 유용한 해를 제공한다. 2차원 해양환경에서는 파수 k가 종 또는 횡 수평거리 방향과 깊이 방향에 대한 함수이므로 3차원 Helmholtz방정식 법을 이용해 스펙트럴 해를 구하여 다시 푸리에 역변환하면 최종 해를 구할 수 있다. 본 연구방법의 정확성을 시험하기 위해서 계단형 해저면을 갖는 간단한 해양환경에서 계산을 수행해 보았으며 대한해협의 특정지역에서의 3차원적 음파전달 특성을 살펴보았다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.38-42
• /
• 2000

In this study, the low velocity impact behavior of the composite laminates has been described by using 3 dimensional nonlinear finite elements. To describe the geometric nonlinearity due to large deformation, the dynamic contact problem is formulated using the exterior penalty finite element method on the base of Total Lagrangian formulation. The incremental decomposition is introduced, and the converged solution is attained by Newton-Raphson Method. The Newmark's constant-acceleration time integration algorithm is used. To make verification of the finite element program developed in this study, the solution of the nonlinear static problem with occurrence of large deformation is compared with ABAQUS, and the solution of the static contact problem with indentation is compared with the Hertz solution. And, the solution of low velocity impact problem for isotropic material is verificated by comparison with that of LS-DYNA3D. Finally the contact force of impact response from the nonlinear analysis are compared with those from the linear analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.661-665
• /
• 2002

A lot of investigations have been made in recent years on the equal channel angular pressing (ECAP) which produces ultra-fine grains. The finite element method has been used to investigate this issue. In this paper, pure-Zirconium is considered far ECAP process by three dimensional finite element analysis. The effects of fiction on the deformation behavior have been investigated and compared with two dimensional finite element analysis.