• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.1
• /
• pp.37-43
• /
• 2008

Purpose: To evaluate dosimetry results of three different techniques for whole breast irradiation after conservative surgery of large pendulous breast patient. Materials and Methods: Planning computed tomography (CT) scans for three techniques were performed on a GE Hi-speed advantage CT scanner in the supine (SP), supine with breast supporting Device (SD) and prone position on a custom prone mattress (PP). Computed tomography images were acquired at 5 mm thickness. The clinical target volumes (CTV), ipsilateral lung and heart were delineated to evaluate the dose statistic, and all techniques were planned with the tangential photon beams (Pinnacle$^3$, Philips Medical System, USA). The prescribed dose was 50 Gy delivered in 25 fractions. To evaluate the dose coverage for CTV, we analysed percent volume of CTV receiving minimum of 95%, 100%, 105%, and 110% of prescription dose ($V_{95}$, $V_{100}$, $V_{105}$, and $V_{110}$) and minimal dose covering 95% ($D_{95}$) of CTV. The dosimetric comparison for heart and ipsilateral lung was analysed using the minimal dose covering 5% of each organs ($D_5$) and the volume that received >18 Gy for the heart and >20 Gy for the ipsilateral lung. Results: Target volume coverage ($V_{95}$ and $V_{100}$) was not significantly different for all technique. The V105 was lower for PP (1.2% vs. 4.4% for SP, 11.1% for SD). Minimal dose covering 95% ($D_{95}$) of target was 47.5 Gy, 47.7 Gy and 48 Gy for SP, SD and PP. The volume of ipsilateral lung received >20 Gy was 21.7%, 11.6% and 4.9% for SP, SD and PP. The volume of heart received >18 Gy was 17.0%, 16.1% and 9.8% for SP, SD and PP. Conclusion: Prone positioning of patient for large pendulous breast irradiation enables improving dose uniformity with minimal heart and lung doses.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.58-68
• /
• 2006

This work proposes a 10b 250MS/s $1.8mm^2$ 85mW 0.13um CMOS A/D Converter (ADC) for high-performance integrated systems such as next-generation DTV and WLAN simultaneously requiring low voltage, low power, and small area at high speed. The proposed 3-stage pipeline ADC minimizes chip area and power dissipation at the target resolution and sampling rate. The input SHA maintains 10b resolution with either gate-bootstrapped sampling switches or nominal CMOS sampling switches. The SHA and two MDACs based on a conventional 2-stage amplifier employ optimized trans-conductance ratios of two amplifier stages to achieve the required DC gain, bandwidth, and phase margin. The proposed signal insensitive 3-D fully symmetric capacitor layout reduces the device mismatch of two MDACs. The low-noise on-chip current and voltage references can choose optional off-chip voltage references. The prototype ADC is implemented in a 0.13um 1P8M CMOS process. The measured DNL and INL are within 0.24LSB and 0.35LSB while the ADC shows a maximum SNDR of 54dB and 48dB and a maximum SFDR of 67dB and 61dB at 200MS/s and 250MS/s, respectively. The ADC with an active die area of $1.8mm^2$ consumes 85mW at 250MS/s at a 1.2V supply.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.48-57
• /
• 2006

This work describes a 12b 200KHz 0.52mA $0.47mm^2$ algorithmic ADC for sensor applications such as motor controls, 3-phase power controls, and CMOS image sensors simultaneously requiring ultra-low power and small size. The proposed ADC is based on the conventional algorithmic architecture with recycling techniques to optimize sampling rate, resolution, chip area, and power consumption. The input SHA with eight input channels for high integration employs a folded-cascode architecture to achieve a required DC gain and a sufficient phase margin. A signal insensitive 3-D fully symmetrical layout with critical signal lines shielded reduces the capacitor and device mismatch of the MDAC. The improved switched bias power-reduction techniques reduce the power consumption of analog amplifiers. Current and voltage references are integrated on the chip with optional off-chip voltage references for low glitch noise. The employed down-sampling clock signal selects the sampling rate of 200KS/s or 10KS/s with a reduced power depending on applications. The prototype ADC in a 0.18um n-well 1P6M CMOS technology demonstrates the measured DNL and INL within 0.76LSB and 2.47LSB. The ADC shows a maximum SNDR and SFDR of 55dB and 70dB at all sampling frequencies up to 200KS/s, respectively. The active die area is $0.47mm^2$ and the chip consumes 0.94mW at 200KS/s and 0.63mW at 10KS/s at a 1.8V supply.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.498-503
• /
• 2006

This in vitro study compared the remineralization of incipient interproximal caries in the presence of three glass ionomer cements (highly-filled glass ionomer cement, compomer, resin-modified glass ionomer cement) and a resin composite(control). The long-term changes in remineralization caused by each material were evaluated by microtomography. Proximal restoration was simulated by placing tooth specimens and the various glass ionomer cements in closed containers with artificial saliva at $37^{\circ}C$ and pH 7.0 for 30 days with constant circulation Tomographic images were obtained with a micro CT scanner at 90, 180, and 270 days, and density-measuring software was used to calculate the micro-density of artificial caries lesions in the specimens. The mean density changes were compared between groups in order to evaluate the effects of remineralization. All data were analyzed using one-way ANOVA and the post-HOC Tukey multiple comparison test at p<0.05. While the density of artificial caries lesions increased for all treatments, the increases for the three glass ionomer groups were significantly higher than that for the resin group in each three month period. As time went on, the amount of density increase of the glass ionomer groups decreased, and significant differences were found between the remineralization effects of the glass ionomer groups.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.557-566
• /
• 2005

In preparation of steamed foam-cakes, effects of whipping time, amount of wheat flour, and amounts of emulsifier on physical properties of the steamed foam cakes were investigated using RSM (response surface methodology). The three independent variables selected for the RSM experiment were whipping time $(X_1)$, amount of wheat flour $(X_2)$, and amounts of wheat flour $(X_2)$, and concentration of emulsifier $(X_3)$ were set for single-stage mixing, respectively. A rotatable central composite design was used for treatment arrangement. The responses from the product for loaf volume, color values and textural properties were analysed. In the analysis of variance for the foam cakes prepared by single-stage method, significant interactions were observed between independent variables (experimental factors) and physical property like loaf volume (p<0.05); textural properties like hardness, gumminess, and chewiness (p<0.05). Among independent variables, concentration of emulsifier had the most effects on physical properties while whipping time. The ordinary points in surface response showed maximal points with physical property like colorimetric b value while other properties revealed saddle points. The 3-dimensional response surface graphs of the predicted regression models displayed decreasing loaf volumes with increasing whipping times and emulsifier concentrations beyond optimum levels. The optimum conditions for best loaf volume and textural property (hardness, gummimess and chewiness) of the products selected by extracting intersectional areas of the contour maps that commonly overlapped all characteristics were; $11\~13$ min whipping time, $470\~486\;g$ amount of wheat flour, and $19\~20\;g$ emulsifier concentration, in case of single-stage method. The median values extracted from the RSM experimental results for optimum manufacturing conditions for single-stage method, i.e., 12 min whipping time, 478 g amount of wheat flour, and 20 g emulsifier concentration were empirically proven to fit the predicted levels of physical properties from the final foam cakes.

• Korean Journal of Food Science and Technology
• /
• v.44 no.2
• /
• pp.228-234
• /
• 2012

The varying characteristics between traditional and commercial soy sauce may be initiated by raw materials and fermentation techniques for the production of $meju$ and $koji$. We examined properties regarding polysaccharides isolated from commercial soy sauce made by the $koji$ process (CSP-0) and Korean traditional soy sauce made by the $meju$ process (KTSP-0) as well as their immuno-stimulating activities. KTSP-0 had rhamnogalacturonan II (RG-II) including 1.1% of unusual monosaccharides 3-deoxy-D-$manno$-2-octulosonic acid (KDO). Anti-complementary activities of CSP-0 and KTSP- 0 were increased dose-dependently but KTSP-0 (64.7%) was higher than CSP-0 (56%) at $1,000{\mu}g/mL$. C3 activation products were identified by crossed immuno-electrophoresis. CSP-0 caused complementary activations $via$ only classical pathway while KTSP-0 caused complementary activations $via$ both alternative and classical pathways. KTSP-0 significantly increased the secretion of interleukin (IL)-6 at $8-1,000{\mu}g/mL$ and IL-12 at $40{\mu}g/mL$ on macrophages. The results suggest that the immuno-stimulating activity of KTSP-0 is greater than that of CSP-0 from anti-complementary activity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.1
• /
• pp.147-152
• /
• 2000

Various lines of evidence suggest that dietary components protect the initiation of carcinogenesis. In this study, the ethanol extracts (AGE) and the methanol and hexane partition layers (AGEM, AGEH) of the Angelica radix were screened for their cytotoxic effects using the MTT assay on HepG2, HeLa, MCF7 and SW626 cells and for their ability to induce quinone reductase (QR) in HepG2 cells. AGEM and AGEH of the Angelica radix showed the strongest cytotoxic effects on HepG2 and HeLa cells. Cell growth was inhibited by 99.8% and 99.8% on HepG2 cells and 99.3% and 99.4% on HeLa cells, at dose of $100\;\mu\textrm{g}/ml$ of AGEM and AGEH extracts respectively. AGE and AGEH significantly induced QR activities in the HepG2 cells. The QR activities of HepG2 cells grown in the presence of AGE, AGEH, and AGEM at the concentration of $50\;\mu\textrm{g}/mL$ were 313.5, 273.3 and 133.3 nmol/min/mg protein, respectively. Therefore, based on these studies, Angelica radix may be developed into a potentially useful cancer chemopreventive agent.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.383-392
• /
• 2007

Karstic features and mining-related cavities not only lead to severe restrictions in land utilizations, but also constitute serious concern about geohazard and groundwater contamination. A microgravity survey was applied for detecting, mapping and monitoring karstic cavities in the test site at Muan prepared by KIGAM. The gravity data were collected using an AutoGrav CG-3 gravimeter at about 800 stations by 5 m interval along paddy paths. The density distribution beneath the profiles was drawn by two dimensional inversion based on the minimum support stabilizing functional, which generated better focused images of density discontinuities. We also imaged three dimensional density distribution by growing body inversion with solution from Euler deconvolution as a priori information. The density image showed that the cavities were dissolved, enlarged and connected into a cavity network system, which was supported by drill hole logs. A time-lapse microgravity was executed on the road in the test site for monitoring the change of the subsurface density distribution before and after grouting. The data were adjusted for reducing the effects due to the different condition of each survey, and inverted to density distributions. They show the change of density structure during the lapsed time, which implies the effects of grouting. This case history at the Muan test site showed that the microgravity with accuracy and precision of ${\mu}Gal$ is an effective and practical tool for detecting, mapping and monitoring the subsurface cavities.

• The Korean Journal of Financial Management
• /
• v.8 no.1
• /
• pp.179-197
• /
• 1991

선도환의 가격을 결정하는 접근방법에는 2차자산(derivative assets)이라는 선도계약의 기본특성에 기초한 재정거래(arbitrage)에 의한 방법이 가장 많이 이용되고 있다. 재정거래방식에는 선도환과 현물외환가격간의 상호관련성에 의하여 선도환가격을 이자율평가설(covered interest rate parity : CIRP), 즉 현물가격과 양국간의 이자율차이의 합으로 표시하고 있다. 특히 현물가격과 이자율은 모두 현재시점에서 의사결정자에게 알려져 있기때문에 선도환가격은 확실성하에서 결정되어 미래에 대한 예측이나 투자자의 위험회피도와는 관계없이 결정된다는 것이 특징이다. 이자율평가설에 관한 많은 실증연구는 거래 비용을 고려한 경우 현실적으로 적절하다고 보고 있다(Frenkel and Levich ; 1975, 1977). 다른 방법으로는 선도환의 미래예측기능에만 촛점을 맞추어 가격결정을 하는 투기, 예측접근방법(speculative efficiency approach : 이하에서는 SEA라 함)이 있다. 이 방법 중에서 가장 단순한 형태로 표시된 가설, 즉 '선도환가격은 미래기대현물가격과 같다'는 가설은 대부분의 실증분석에서 기각되고 있다. 이에 따라 SEA에서는 선도환가격이 미래에 대한 기대치뿐만 아니라 위험프리미엄까지 함께 포함하고 있다는 새로운 가설을 설정하고 이에 대한 실증분석을 진행한다. 이 가설은 이론적 모형에서 출발한 것이 아니기 때문에, 특히 기대치와 위험프레미엄 모두가 측정 불가능하다는 점으로 인하여 실증분석상 많은 어려움을 겪게 된다. 이러한 어려움을 피하기 위하여 많은 연구에서는 이자율평가설을 이용하여 선도환가격에 포함된 위험프레미엄에 대해 추론 내지 그 행태를 설명하려고 한다. 이자율평가설을 이용하여 분석모형을 설정하고 실증분석을 하는 것은 몇가지 근본적인 문제점을 내포하고 있다. 먼저, 앞서 지적한 바와 같이 이자율평가설을 가정한다는 것은 SEA에서 주된 관심이 되는 미래예측이나 위험프레미엄과는 관계없이 선도가격이 결정 된다는 것을 의미한다. 따라서 이자율평가설을 가정하여 설정된 분석모형은 선도환시장의 효율성이나 균형가격결정에 대한 시사점을 제공할 수 없다는 것을 의미한다. 즉, 가정한 시장효율성을 실증분석을 통하여 다시 검증하려는 것과 같다. 이러한 개념적 차원에서의 문제점 이외에도 실증분석에서의 추정상의 문제점 또한 존재한다. 대부분의 연구들이 현물자산의 균형가격결정모형에 이자율평가설을 추가로 결합하기 때문에 이러한 방법으로 설정한 분석모형은 그 기초가 되는 현물가격모형과는 달리 자의적 조작이 가능한 형태로 나타나며 이를 이용한 모수의 추정은 불필요한 편기(bias)를 가지게 된다. 본 연구에서는 이러한 실증분석상의 편기에 관한 문제점이 명확하고 구체적으로 나타나는 Mark(1985)의 실증연구를 재분석하고 실증자료를 통하여 위험회피도의 추정치에 편기가 발생하는 근본원인이 이자율평가설을 부적절하게 사용하는데 있다는 것을 확인 하고자 한다. 실증분석결과는 본문의 <표 1>에 제시되어 있으며 그 내용을 간략하게 요약하면 다음과 같다. (A) 실증분석모형 : 본 연구에서는 다기간 자산가격결정모형중에서 대표적인 Lucas (1978)모형을 직접 사용한다. $$1={\beta}\;E_t[\frac{U'(C_{t+1})\;P_t\;s_{t+1}}{U'(C_t)\;P_{t+1}\;s_t}]$$ (2) $U'(c_t)$와 $P_t$는 t시점에서의 소비에 대한 한계효용과 소비재의 가격을, $s_t$와 $f_t$는 외환의 현물과 선도가격을, $E_t$와 ${\beta}$는 조건부 기대치와 시간할인계수를 나타낸다. Mark는 위의 식 (2)를 이자율평가설과 결합한 다음의 모형 (4)를 사용한다. $$0=E_t[\frac{U'(C_{t+1})\;P_t\;(s_{t+1}-f_t)}{U'(C_t)\;P_{t+1}\;s_t}]$$ (4) (B) 실증분석의 결과 위험회피계수 ${\gamma}$의 추정치 : Mark의 경우에는 ${\gamma}$의 추정치의 값이 0에서 50.38까지 매우 큰 폭의 변화를 보이고 있다. 특히 비내구성제품의 소비량과 선도프레미엄을 사용한 경우 ${\gamma}$의 추정치의 값은 17.51로 비정상적으로 높게 나타난다. 반면에 본 연구에서는 추정치가 1.3으로 주식시장자료를 사용한 다른 연구결과와 비슷한 수준이다. ${\gamma}$추정치의 정확도 : Mark에서는 추정치의 표준오차가 최소 15.65에서 최대 42.43으로 매우 높은 반면 본 연구에서는 0.3에서 0.5수준으로 상대적으로 매우 정확한 추정 결과를 보여주고 있다. 모형의 정확도 : 모형 (4)에 대한 적합도 검증은 시용된 도구변수(instrumental variables)의 종류에 따라 크게 차이가 난다. 시차변수(lagged variables)를 사용하지 않고 현재소비와 선도프레미엄만을 사용할 경우 모형 (4)는 2.8% 또는 2.3% 유의수준에서 기각되는 반면 모형 (2)는 5% 유의수준에서 기각되지 않는다. 위와같은 실증분석의 결과는 앞서 논의한 바와 같이 이자율평가설을 사용하여 균형자산가격 결정모형을 변형시킴으로써 불필요한 편기를 발생시킨다는 것을 명확하게 보여주는 것이다.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.839-853
• /
• 1998

The present study was performed to prove the relationship between CO-CR discrepancy and facial skeletal type. In this study, 242 subjects were randomly selected and devided into 9 groups(devided into class I, II, III by ANB and each one devided into dolicho-, brachy-, mesofacial skeleton by Ricketts' vertical index). Lateral cephalometric radiographs with the mandible in centric occlusion were taken and measured and CO and CR bites were registered on all subjects. Diagnostic casts were mounted on Panadent articulator using an estimated face-bow and centric relation bite registration. The amount and direction of CO-CR discrepancy present was recorded using a Condylar Position Indicator(CPI) and a centric occlusion wax bite registration. CPI measurements and cephalometric measurements were statistically analyzed. The finding of this study can be summerized as follows : 1. There is little correlation between right and left sides for magnitude or direction of CO-CR discrepancies. The correlation between the magnitude of CO-CR discrepancy of left A-P and right A-P is higher than that of left S-I and right S-I. 2. Correlation of Class II malocclusion group was higher than that of the other groups between the magnitude of CO-CR discrepancy of left CPI and right CPI. 3. There is no difference between the pattern of CO-CR discrepancy of 9 malocclusion groups. 4. There is very little, if any, correlation between Skeletofacial measurements and CO-CR discrepancy. 5. In Class II brachyfacial skeleton and Class III mesofacial skeleton there was Lateral cephalometric measurements by that we predict CPI measurements was detected. That was overbite, overjet, upper genial angle, lower genial angle, saddle angle, articular angle, convexity of point A, ANS-Me/Na-Me, PCBL/RH, Posterior FH/anterior FH.