• Title/Summary/Keyword: 3차원 유한요소법

Search Result 648, Processing Time 0.035 seconds

OPTIMAL DESIGN OF PIEZOELECTRIC CANTILEVER FOR FAN BY THREE-DIMENSIONAL FINITE ELEMENT METHOD (3차원 유한 요소법을 이용한 팬용 압전 외팔보의 최적 설계)

  • Kim, Byoung-Jai;Rho, Jong-Suk;Jung, Hyun-Kyo
    • Proceedings of the KIEE Conference
    • /
    • 2004.04a
    • /
    • pp.52-54
    • /
    • 2004
  • 압전 외팔보의 구조가 갈수록 복잡해짐에 따라 더 정확하고 효과적인 압전체의 해석이 요구되어지고 있다. 본 논문에서는 3차원 직육면체요소를 이용한 유한요소법을 통해 압전 변환기를 해석하고, 이것을 실험적으로 검증함으로써, 3차원 유한요소법을 이용한 해석 프로그램의 타당성을 확인하였다. 또한 3차원 유한요소법을 이용해서 압전 외팔보를 해석하고, 이것을 실험결과를 통해서 검증하였다. 그리고 압전 외팔보를 팬으로 적용하기 위해서 끝단에서의 최대 변위를 목적함수로 한 진화 전략 알고리즘을 적용하였다. 이를 통해서 팬용 압전 외팔보의 최적 설계를 수행하였다.

  • PDF

Three-dimensional Finite Element Studies of the Behavior of Short Pile Subjected to Lateral Load near a Sandy Slope (모래사면에 설치된 수평하중을 받는 짧은 말뚝의 거동에 관한 3차원 탄소성 유한요소해석)

  • ;Ugai Keizo;Wakai Akihiko
    • Journal of the Korean Geotechnical Society
    • /
    • v.17 no.3
    • /
    • pp.41-50
    • /
    • 2001
  • 본 연구는 모래사면의 언덕근처에 설치된 짧은 말뚝의 수평하중의 영향에 관한 것이다. 3차원 탄소성 유한요소법해석과 실내 모형실험의 결과를 비교하였다. 경사 30$^{\circ}$의 사면에 시공된 짧은 말뚝의 특성을 파악하기 위해, 사면언덕에서 모형말뚝까지의 거리를 3종류로 상이하게 하여, 모형실험을 실시하였다. 사용된 모래의 지반특성은 배수조건하의 삼축압축실험으로 결정하였다. 동시에 3차원 탄소성 유한요소법에 의한 수치해석결과와 모형실험결과를 비교하였다. 본 유한요소법의 해석에 있어서 모래지반을 탄성완전소성모델(Elastic-perfectly plastic model)로 가정하여, 파괴기준으로 Mohr-Coulomb 식과 소성 포텐셜에 대해서는 Drucker-Prager 식을 적용한 MC-DP 모델로 하였다. 이러한 MC-DP 모델의 구성식은 유한요소법에서 있어 계산치의 수렴에 유익하다. 3차원 탄소성 유한요소법에 의한 수치해석이 사질토 사면의 언덕 부근에 설치된 단하의 수평거동에 대한 파악에 유효하다는 것을 확인하였다.

  • PDF

주조 해석을 위한 3차원 상변화 유한 요소 해석 프로그램 개발

  • 하성규;조성수
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 1997.04a
    • /
    • pp.147-159
    • /
    • 1997
  • 본 연구에서는 상변화 영역에서 열평형 방정식을 별도로 수식화하지 않고도 잠열의 영향을 고려할 수 있으며, 고상과 액상 그리고 2상 영역에서 동일한 형태의 방정식을 사용할 수 있는 엔탈피법을 이용하였다. 상변화 문제의 엔탈피법을 이용한 유한요소해석을 위하여 8개의 절점을 가지며, 각 절점에서 1개의 자유도를 가지는 3차원 육면체 요소가 개발되었다. 해법의 타당성과 해의 정확도를 검증하기 위하여 엄밀해가 존재하는 상변화 문제를 유한요소법으로 해석하고 그 결과를 비교 검토하였다. 연구 결과, 엔탈피법에 의한 유한요소해는 상변화 영역이 하나의 특정 온도인 경우는 물론 온도 구간으로 나타나는 경우에도 시간 증분과 요소수에 크게 영향을 받지 않고 안정된 해가 됨을 알 수 있었다. 검증된 요소를 이용하여 3차원 상변화 문제에 적용하여 해를 나타내었다.

  • PDF

Computational strategies for improving efficiency in rigid-plastic finite element analysis (강소성 유한요소해석의 안정화와 고능률화에 관한 연구)

  • ;;Yoshihiro, Tomita
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.13 no.3
    • /
    • pp.317-322
    • /
    • 1989
  • Effective computational strategies have been proposed in the evaluation of stiffness matrices of rigid-plastic finite element method widely used in simulation of metal forming processes. The stiffness matrices are expressed as the sum of stiffness matrices evaluated by reduced integration and Liu's stabilization matrices which control the occurrence os zero-energy mode due to excessive reduced integration. The proposed method has been applied to the solution of fundamental 3-dimensional problems. The results clarified that the deformed mesh configuration was remarkably stabilized and computation speed attained about 3 times as fast as that of conventional 3-dimensional analyses. Furthermore, computation speed increases by a factor 60 when parallel computation is introduced. This speed has a tendency to increase as the total degree of freedom increases. As a result, this rigid-plastic finite element method enables us to analyze real 3-dimensional forming processes with practically acceptable computation time.

Two-dimensional Resistivity Modeling Using Boundary Elements Method (경계 요소법을 이용한 2차원 비저항 모델링)

  • 김형수
    • The Journal of Engineering Geology
    • /
    • v.6 no.3
    • /
    • pp.119-130
    • /
    • 1996
  • The theory and numerical technique using boundary elements method (BEM) are given to solve 2-dimensional resistivity problems. Potential distributions from homogeneous resistivity model and layered model are calculated by using BEM for a point source of current injection. The potential distributions of BEM are compared with those of finite difference method (FDM) and finite elements method (FEM). Among the three numerical methods to solve 2-dimensional resistivity problem, it is proved that BEM is more efficient tool than FDM and FEM in consideration of computing storage and time as weU as the accuracy of solutions.

  • PDF

Calculation of Resistance of Squirrel Cage Induction Motor End Ring using 3-D Finite Element Method (3차원 유한요소법을 이용한 농형유도전동기 단락환의 저항계산)

  • 박민우;이복용;이기석
    • The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.10 no.2
    • /
    • pp.71-77
    • /
    • 1996
  • The end-ring may contribute a significant influence to the performance of machine. The induced currents flow through the bars of a cage rotor and complete their closed paths by passing around the end-ring. This dissertation is to describe a method for calculating end-ring resistance of squirrel cage rotor, based on 3-D finite element method(A-$\Phi$). The resistance under consideration of skin effect is calculated by using Joule's loss equation.

  • PDF

Optimal Design of Piezoelectric Cantilever for Fan by Evolution Strategy (진화알고리즘을 이용한 압전 외팔보 팬의 최적설계)

  • Kim, Byoung-Jai;Jung, Hyun-Kyo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2004.07b
    • /
    • pp.701-704
    • /
    • 2004
  • 압전 외팔보의 구조가 갈수록 복잡해짐에 따라 더 정확하고 효과적인 압전체의 해석이 요구되어지고 있다. 본 논문에서는 3차원 직육면체요소를 이용한 유한요소법을 통해 압전 변환기를 해석하고, 이것을 실험적으로 검증함으로써, 3차원 유한요소법을 이용한 해석 프로그램의 타당성을 확인하였다. 또한 3차원 유한요소법을 이용해서 압전 외팔보를 해석하고, 이것을 실험 결과를 통해서 검증하였다. 그리고 압전 외팔보를 팬으로 적용하기 위해서 끝단에서의 최대 변위와 EMCF(Electo-Mechanical Coupling Factor)를 목적함수로 한 진화 전략 알고리즘을 적용하였다. 이를 통해서 팬용 압전 외팔보의 최적 설계를 수행하였다.

  • PDF

Design and Analysis of Micro-positioning Actuator using Three Dimensional Finite Element Method (3차원 유한요소법을 이용한 Micro positioning actuator의 설계 및 해석)

  • Oh, Kwang-Il;Rho, Jong-Seok;Jung, Hyun-Kyo
    • Proceedings of the KIEE Conference
    • /
    • 2005.04a
    • /
    • pp.64-66
    • /
    • 2005
  • 본 논문에서는 압전체의 타원 운동을 이용한 선형 Micro-Positioning Actuator(MPA)에 대한 설계 및 해석 기법을 제안하였다. 또한 MPA의 해석을 위해 3차원 압전체의 유한요소의 정식화를 통한 유한요소 해석기법의 검증을 수행하였다. 검증된 3차원 유한요소 해석을 이용하여 MPA의 공진 특성 즉 impedance, 모드, 그리고 타원운동 해석을 하였다. 마지막으로 제안된 해석기법을 이용하여 기계 시스템을 고려한 MPA의 최종 설계를 하였다.

  • PDF

A Study on the Stochastic Sensitivity in Structural Dynamics (구조물의 동적 응답에 대한 확률 민감도 해석에 관한 연구)

  • 최찬문
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.32 no.2
    • /
    • pp.177-190
    • /
    • 1996
  • 구조물의 동적 응답 해석 문제에 대해서, 확률 유한요소법을 논의코자, 기조의 유한요소 해석법에 수반 변수법(adjoint variable approach)과 2차 섭동법(second order perturbation method)을 적용한다. 동적 민감도의 시간 응답을 고려하기 위해서 모든 시간에 대해서 갖는 구속 조건의 범함수 형태를 취하고, 시간 적분에 있어서 중첩법(fold superposition technique)에 근거를 둔 수치 해석이 훨씬 더 효과적임을 보인다. 본 논문의 확률 유한요소 해석법은 기존의 유한요소 해석법은 기존의 유한요소 코드에 맞추어 쉽게 적용할 수 있는 이점이 있음을 보이며, 이의 검정을 위해서, 2차원과 3차원 프레임 구조물에 대한 수치 해석을 하고 그 결과를 검토해 보았다.

  • PDF