• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.3
• /
• pp.71-79
• /
• 2009

We expanded the 3D building information extraction method using shadow and vertical line from single high resolution image with meta information into the method for single high resolution image without meta information. Our method guesses an azimuth angle and an elevation angle of the sensor and the sun using reference building, selected by user, on an image. For test, we used an IKONOS image and an image extracted from the Google Earth. We calculated the Root Mean Square (RMS) error of heights extracted by our method using the building height extracted from stereo IKONOS image as reference, and the RMS error from the IKONOS image and the Google Earth image was under than 3 m. We also calculated the RMS error of horizontality position by comparison between building position extracted from only the IKONOS image and it from 1:1,000 digital map, and the result was under than 3 m. This test results showed that the height pattern of building models by our method was similar with it by the method using meta information.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.9-14
• /
• 2004

이 논문에서는 다중 프로브 교정 시 발생하는 오차를 측정하여 보정함으로써 측정 정밀도를 향상시킬 수 있는 프로그램을 개발에 대하여 연구하였다. 교정 시와 동일한 조건으로 기준구를 측정하여 오차를 산출한 다음 프로브 파라미터가 기록된 시스템 파일을 수정함으로써 교정 오차를 보정하는 프로그램을 개발하였다. 실험 결과 이론값과 실제값의 차가 CMM 분해능의 2배 이내임을 확인하였으며 프로그램은 CMM 사용자가 직접 작성 및 편집 가능하도록 DMIS 언어를 사용하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.4
• /
• pp.88-94
• /
• 2007

This paper deals with the performance analysis of 3-dimensional array antenna by DOA estimation and beamforming in GPS receiver for performance improvement by interference elimination. The array antenna in GPS receiver can improve the system performance by estimating DOA of arriving signal direction, making the main beam for desired direction and elimate the jammer signal by nulling while keeping the GPS signal direction by spatial filtering. In this paper, we propose five types of 3-dimensional array antenna and analyze the estimation error via MUSIC algorithm which is used for the estimation of DOA of arrived signal and beamforming performance. In analyzing DOA performance, we measure DOA estimation error, while in analyzing beamformig performance, we measure BER. In beamforming performance analyzing, we use various jammer power and the existence of GPS signal and angle spread. By performing through the computer simulation, Curved (B) 7-element antenna in proposed 3-dimensional array antenna exhibits the superior performance in the DOA estimation, estimation error, BER characteristic and angle spread compared to the rest four array antenna types.

• Geophysics and Geophysical Exploration
• /
• v.17 no.2
• /
• pp.95-103
• /
• 2014

This paper presents a practical inversion method for recovering a three-dimensional (3D) resistivity model and static shifts simultaneously. Although this method is based on a Gauss-Newton approach that requires a sensitivity matrix, the computer time can be greatly reduced by implementing a simple and effective procedure for updating the sensitivity matrix using the Broyden's algorithm. In this research, we examine the approximate inversion procedure and the weighting factor ${\beta}$ for static shifts through inversion experiments using synthetic MT data. In methods using the full sensitivity matrix constructed only once in the iteration process, a procedure using the full sensitivity in the earlier stage is useful to produce the smallest rms data misfit. The choice of ${\beta}$ is not critical below some threshold value. Synthetic examples demonstrate that the method proposed in this paper is effective in reconstructing a 3D resistivity structure from static-shifted MT data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.153-160
• /
• 2010

It is necessary to determine accurate 3-dimensional coordinates of the building corner points that could be control or check points in order to verify the accuracy of 3D digital maps in the near future. The usual process of obtaining the coordinates of the building corner points is to set up the ground control points with a GPS and then to practice terrestrial survey such as distance or angle measurements. However, since an error in the ground control points can be propagated through the terrestrial survey into the final coordinates of the buildings, accurately should be considered as much as possible. The actual effect of the GPS-derived ground control point error on the estimates of the unknowns through the terrestrial survey is mathematically analyzed, and the simulation data is tested numerically. The error of the ground control points is tested in the cases of 1-4 cm for the horizontal components and 2-8 cm for the vertical component. The vertical component error is assigned twice the horizontal ones because of the characteristics of the GPS survey. The distance measurement is assumed for convenience and the precision of the estimated coordinates of the building corner points is almost linearly increased according to the errors of the ground control points. In addition, the final estimates themselves can vary by the simulated random errors depending on the precision of the survey instrument, but the precision of the estimates is almost independent of survey accuracy.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.88.1-88.1
• /
• 2011

본 연구에서는 SOFC 시스템 설계기술 개발을 위한 기초 연구로서 전산해석을 이용한 SOFC 성능예측 기법을 개발하였다. 기본설계 단계에서 SOFC의 성능을 개략적으로 예측할 수 있는 1차원 예측 모델을 정립하였으며, 온도, 조성, 전해질, 전극 두께 등을 비롯한 다양한 조건 변화에 따른 성능예측을 수행하여 실험값과 비교한 결과 최대전력밀도 조건에서 23%의 오차를 갖는 것으로 나타났다. 또한 Stack 제작단계에서 다양한 운전조건과 형상변화에 따른 SOFC 성능 변화를 예측할 수 있는 3차원 해석기법을 정립하였으며, 최대전력밀도에서 5.1%의 오차를 보였다. 포괄적인 열 및 물질 전달 현상과 전기화학반응을 3차원적으로 해석함으로써 보다 정확한 예측이 가능하였다. 또한 수소와 적당량의 수분을 함께 공급할 경우 SOFC 성능이 향상되는 것으로 나타났다. 본 연구에서 개발된 기술을 활용할 경우 시제품 제작 전에 전지시스템의 성능을 미리 예측할 수 있으므로, 향후 제품 개발시 제작비용 절감과 설계기간 단축에 기여할 수 있을 것으로 기대된다.

• The Korean Journal of Nuclear Medicine
• /
• v.30 no.4
• /
• pp.548-559
• /
• 1996

A series of performance measurements of positron emission tomography (PET) were performed following the recommendations of the Computer and Instrumentation Council of the Society of Nuclear Medicine and the National Electrical Manufacturers Association. We investigated the performance of the General Electric $Advance^{TM}$ PET. The measurements include the basic intrinsic tests of spatial resolution, scatter fraction, sensitivity, and count rate losses and randoms. They also include the tests of the accuracy of corrections: count rate linearity correction, uniformity correction, scatter correction and attenuation correction. GE $Advance^{TM}$ PET has bismuth germanate oxide crystals (4.0mm transaxial ${\times}$ 8.1mm axial ${\times}$ 30.0mm radial) in 18 rings, which form 35 imaging planes spaced by 4.25mm. The system has retractable tungsten septa 1mm thick and 12cm long. Transaxial resolution was 4.92mm FWHM in 2D and 5.14mm FWHM in 3D at the center. Average axial resolution in 2D decreased from 3.91mm FWHM at the center to 6.49mm FWHM at R=20cm. Average scatter fraction of direct and cross slices was 9.57%. Dead-time losses of 50% corresponded to a radioactivity concentration of $4.86{\mu}Ci/cc$ and a true count rate of 519 kcps in 2D. The accuracy of count rate linearity correction was 1.84% at the activity of $4.50{\mu}Ci/cc$. Non-uniformity was 2.06% in 2D and 2.93% in 3D. Remnant errors after scatter correction were 0.55% in 2D and 4.12% in 3D. The errors of attenuation correction were 6.21% (air), 0.20% (water), -6.32% (teflon) in 2D and 5.00% (air), 6.94% (water), 3.01% (teflon) in 3D. The results indicate the performance of GE $Advance^{TM}$ PET scanner to be well suited for clinical and research applications.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.2
• /
• pp.129-135
• /
• 2015

The objective grading system for the facial palsy is needed. In this study, the facial palsy grading system was developed with combination of three dimensional image processing and Nottingham scale. The developed system is composed of 4 parts; measurement part, image processing part, computational part, facial palsy evaluation & display part. Two web cam were used to get images. The 8 marker on face were recognized at image processing part. The absolute three dimensional positions of markers were calculated at computational part. Finally, Nottingham scale was calculated and displayed at facial palsy evaluation & display part. The effects of measurement method and position of subject on Nottingham scale were tested. The markers were measured with 2-dimension and 3-dimension. The subject was look at the camera with $0^{\circ}$ and $11^{\circ}$ rotation. The change of Scale was large in the case of $11^{\circ}$ rotation with 2-dimension measurement. So, the developed system with 3-dimension measurement is robust to the orientation change of subject. The developed system showed the robustness of grading error originated from subject posture.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.4
• /
• pp.407-415
• /
• 2011

The stability condition and wideband characteristics of 3D ID-FDTD algorithm which has low dispersion error with isotropic dispersion are presented in this paper. 3D ID-FDTD method was proposed to improve the defect of the Yee FDTD such as the anisotropy and large dispersion error. The published paper calculated the stability condition of 3D ID-FDTD algorithm by using numerical method, however, it is thought that the examples were not sufficient to verify the stability condition. Thus, in this paper, various simulations are included in order to hold reliability under the conditions that the plane wave propagation is assumed with a single frequency and a wideband frequency. Also, the 3D ID-FDTD algorithm is compared to those that have the similar FDTD algorithm with ID-FDTD such as Forgy's method and non-standard FDTD method in a wideband. Finally, the radar cross section(RCS) for the large sphere with high dielectric constant is calculated.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• fall
• /
• pp.124-125
• /
• 2021

최근 증강현실(AR), 가상현실(VR), 혼합현실(XR) 분야가 각광받고 있으며, 3차원 공간과 사물을 인식하여 다양한 콘텐츠 서비스를 제공하는 기술이 개발되고 있다[1]. 3차원 공간과 사물을 인식하기 위해 가장 널리 사용되는 방법은 RGB 카메라를 이용하는 것이다[2]. RGB 카메라를 이용하여 촬영한 영상을 분석한 후 분석된 결과를 이용하여 카메라와 환경의 관계를 추정한다. 시차는 사용자가 촬영한 복수의 이미지에서 특징점의 차이를 이용하여 계산된다. 실험적으로 구한 깊이에 대해 계산된 디스패리티에 시차 정보와 스케일링 정보를 더하여 3차원 특징점을 생성한다. 제안하는 알고리즘은 단일 모바일 디바이스에서 획득한 영상을 사용한다. 특징점 매칭을 기반으로한 디스패리티 추정과 시차조정 3D 특징점 생성이다. 실제 깊이 값과 비교했을 때, 생성된 3차원 특징점은 실측값의 10% 이내의 오차가 있음을 실험적으로 증명하였다. 따라서 제안하는 방법을 이용하여 유효한 3차원 특징점을 생성할 수 있다.