• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.710-716
• /
• 2008

This paper covers the performance evaluation of two flash memory-based file storages, NAND and NOR, which are the major flash types. To evaluate their performances, we set up separate file storages for the two types of flash memories on a PocketPC-based experimental platform. Using the platform, we measured and compared the I/O throughputs in terms of buffer size, amount of used space, and kernel-level write caching. According to the results from our experiments, the overall performance of the NAND-based storage is higher than that of NOR by up to 4.8 and 5.7 times in write and read throughputs, respectively. The experimental results show the relative strengths and weaknesses of the two schemes and provide insights which we believe assist in the design of flash memory-based file storages.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.9
• /
• pp.807-815
• /
• 2017

Auxetic structures with negative Poisson's ratio can be used to achieve high mechanical properties in energy absorption and destruction toughness. In this paper, we aim to design an auxetic structure which has a high negative Poisson's ratio and a stiffness over 50N/mm by using an optimization method. Length(L), thickness(t) and angle(${\theta}_1$, ${\theta}_2$) of an auxetic pyramid are the design parameters, and also stress, Poisson's ratio and stiffness are thr reaction factors. We used Box-Behnken method and conducted 4 factors - 3 levels experiment design. Finite element models are analyzed by using Edison program CSD_EPLAST.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.39-39
• /
• 2009

고강도강의 용접성은 저온균열 저항성으로 대변되는데, TMCP강과 HSLA강 등이 개발되면서 고강도강의 저온균열저항성이 크게 향상되어 무예열 용접성이 확보되었다. 그러나 용접재료 측면에서는 그에 상응하는 재료의 개발이 지연되어 용착금속부에서의 저온균열이 심각한 문제로 대두되고 있는 실정이다. 이러한 문제는 800 MPa급인 HY-100강재를 HSLA-100강으로 대체하는 과정에서 현실적인 문제로 제기 되었다. 즉 HSLA강은 용접 예열이 필요치 않았으나 기존의 용접재료, 즉 HY-100 강재에 사용하던 용접재료를 사용하게 되면 용착금속부에서 저온균열이 발생하여 용접예열을 생략할 수 없다는 판단에 이르게 되었던 것이다. 이에 본 연구의 목적은 HSLA-100강을 무예열 용접할 수 있는 GMA 용접와이어 개발하는 것이며, 구체적인 개발 목표는 무예열 용접조건에서 800 MPa 이상의 인장강도를 가지며 $-50^{\circ}C$에서의 충격인성이 50 J 이상인 GMA 용접와이어 개발하는 것이다. 이러한 용접재료를 합금설계함에 있어 무예열 용접성을 확보하기 위하여 용접재료의 탄소함량을 0.01% 수준으로 하고, 용착금속의 인장강도와 저온 충격치에 미치는 Mn과 Mo 함량의 영향을 검토하고 각각의 조성을 실험계획법으로 확정하였다. 그리고 확산성수소량에 따른 저온균열 발생 여부를 확인하여 무예열용접성을 확보하기 위해서는 확산성수소량이 3ml/100g 이하가 되어야 한다는 사실을 실험적으로 확인하였다. 그리고 이를 달성하기 위해서는 원자재인 와이어로드의 표면 품질이 중요하다는 사실도 확인할 수 있었다. 다음으로는 실험계획법에 의거하여 선정된 합금조성의 신뢰성을 검증하기 위하여 800kg 중량의 시제품을 생산하였으며, 생산된 시제품에 대해서는 실험계획법에서 사용한 Ar+5%CO2외에도 Ar+20%CO2를 적용하여 보호가스의 영향을 검토하였다. 검토 과정에서 Ar+20%CO2용으로 사용하기 위해서는 용접재료의 Si 및 Mn 함량이 상향조정되어야 함을 확인할 수 있었다. 그리고 탄소함량을 0.05% 수준으로 증가시키면 Mo 함량을 크게 저하시킬 수 있음도 확인할 수 있었다. 이러한 과정을 거쳐 개발된 GMA 용접재료는 무예열 용접조건에서 저온균열이 발생하지 않았으며, 인장강도는 830 MPa이었으며 $-50^{\circ}C$에서의 충격치는 90 J 이상이었다.

• Proceedings of the Korean Association for Survey Research Conference
• /
• 2005.12a
• /
• pp.91-113
• /
• 2005

본 연구는 청년들의 취업 및 실업 경험이 정신건강에 어떠한 영향을 미치는지 종단적으로 알아보는 데 목적이 있다. 구체적으로 대학을 졸업하고 난 이후에 지속적으로 미취업 상태로 남아있는 사람들의 정신건강의 문제 그리고 취업에 성공하는 경험이 정신건강에 미치는 영향을 미치는지 알아보고자 한다. 이를 위해서 국내 대학교 4학년생들을 대상으로 1차 조사를 실시하고 이후 약 6개월 간격으로 2차 조사, 3차 및 4차 조사를 실시하였다. 네 시점에서 모두 응답자들의 취업여부와 정신건강 수준을 측정하였다. 4차 조사까지 모두 응답한 560명 중에서 2차, 3차, 및 4차 시점의 취업여부에 의해서 집단을 다음과 같이 나누었다: 2차, 3차 및 4차 시점 순서대로, 모두 취업 상태인 집단('취업-취업-취업 집단'), 3차 시점에서 취업에 성공한 집단('미취업-취업-취업 집단'), 4차 집단에서 취업에 성공한 집단('미취업-미취업-취업집단') 그리고 모두 미취업 상태인 집단('미취업-미취업-미취업 집단'). 그 결과를 보면, 취업-취업-취업 집단의 경우에는 취업에 성공한 2차 시점에서 정신건강 수준이 상당히 좋아졌다가 3차 및 4차 시점에서 다시 본래 수준으로 돌아가는 경향을 보였다. 미취업-취업-취업 집단의 경우에는 취업에 성공한 3차 시점 이후로, 미취업-미취업-취업 집단의 경우에는 취업에 성공한 4차 시점에서 정신건강 수준이 좋아지는 경향을 보였다. 지속적으로 미취업 상태였던 집단에서는 3차 시점에서 정신건강 수준이 상당히 나빠졌다가 여전히 미취업 상태인 4차 시점에서 오히려 완화되는 경향을 보였다. 본 연구의 시사점과 제한점 및 장래 연구의 과제가 논의되었다.iments and numerical analysis of luminescence efficiency in the hole carrier transport layer's thicknes. 나아갈 것이며, 아울러 향후에도 아직 미흡한 분야인 IT 아웃소싱에서 적정수준의 대가지급 방안 및 바람직한 Relationship 에 영향을 미치는 여러 가지 요인에 대해서도 살펴 봄으로써 IT분야의 Outsourcing을 검토하거나, 추진할 때 도움이 될 수 있도록 하고자 한다.개의 총 297개의 데이터를 추출하여 사용하였다. 실험과는 좌측공격 91.7%, 우측공격 100%, 중앙공격 87.5%, 코너킥 97.4%, 프리킥 75%로서 매우 양호한 인식율을 보였다. 사용경험정도가 가입직후 해지에만 영향을 미치는 요인임을 보여준다. 또한 매체의 정보전달 풍부성 (media richness)이 상대적으로 높은 소매점이나 웹사이트를 통해 서비스에 가입한 소비자일수록 가입 직후뿐만 아니라 서비스사용 이후에도 낮은 해지성향을 나타냈다. 이러한 분석결과를 바탕으로 인터넷전화 서비스에 적합한 고객지원 프로그램 설계와 마케팅 매체선정과 관련한 전략적 시사점을 도출한다. 그리고 국내에서 최근 이슈가 되고 있는 차세대 무선인터넷 서비스인 와이브로 출시에 따른 마케팅 및 고객관리와 관련된 시사점을 논의한다.는 교합면에서 2, 3, 4군이 1군에 비해 변연적합도가 높았으며 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다 이번 연구를 통하여 복합레진을 간헐적 광중합시킴으로써 변연적합도가 향상될 수 있음을 알 수 있었다.시장에 비해 주가가 비교적 안정적인 수준을 유지해 왔다고 볼

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.23-30
• /
• 2001

The cavitation noise of high-speed propellers was experimentally studied using new measurement device in KRISO cavitation tunnel. A series of cavitation noise tests were carried out for 6 propellers with various sections, loading distributions, and a different area ratio. From the experimental results, the noise characteristics for various cavitation patterns and the noise performance for a series of propellers were analyzed. These can be used for full-scale prediction study of the noise and optimum design of high-speed propellers.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.134-140
• /
• 2017

In this study, the flexural behavior of high strength concrete members with different curing condition of 90 MPa of compressive strength was investigated. Experimental parameters included normal and low temperature curing conditions, tensile steel amount and concrete compressive strength. 8 beam members were fabricated and flexural tests were carried out. Crack spacing, load-deflection relation, load-strain relation and ductility index were determined. Experimental results show that as the amount of rebar increases, the number of cracks increases and the crack spacing decreases. The higher the concrete strength, the smaller the number of cracks, but the effect is significantly smaller than the amount of rebar. As a result of comparison with the proposed average crack spacing in the design criteria, the experimental results are slightly larger than the results of the proposed formula, but the proposed formula does not reflect the concrete strength and curing conditions. The ductility index of normal temperature cured members was 3.36~6.74 and the ductility index of low temperature cured members was 1.51~2.82. The behavior of low temperature cured members was found to be lower than that of normal temperature cured members. As a result of comparing the ductility index with the existing studies similar to the experimental members, the ductility index of the high strength concrete member was larger than the ductility index of the ordinary strength concrete of the previous study. Further research is needed to understand more specific results.

• Journal of Animal Science and Technology
• /
• v.53 no.2
• /
• pp.119-126
• /
• 2011

The study was conducted to investigate the effects of dietary energy and protein levels on productivity and feed cost in crossbred chicks. Experiment was divided into starting (0~5 weeks), growing (6~10 weeks), and finishing (11~14 weeks) periods. Design of feeding trials was 3 ${\times}$ 3 factorial to feed different energy and protein levels for starting (ME 2,950, 3,000, and 3,050 kcal/kg CP 18, 19, and 20%), growing (ME 3,000, 3,050, and 3,100 kcal/kg CP 17, 18, and 19%) and finishing (ME 3,050, 3,100, and 3,150 kcal/kg CP 16, 17, and 18%) periods, respectively. In the starting period, weight gain and FCR was improved by dietary protein level (P<0.05). Interaction effect existed in feed intake and FCR (P<0.05). Weight gain was higher in 3,000 kcal/kg ME treatment than 3,100 kcal/kg ME treatment for growing period (P<0.05). In finishing period, feed intake was significantly decreased in ME 3,150 kcal/kg treatment than the other ME treatments (P<0.05). Feed cost/weight gain (FC/WG) was significantly decreased in chicks fed with 2,950 kcal/kg ME and 19% CP in starting period (P<0.05). For the growing period, FC/WG was notably increased in ME 3,000, 3,050 kcal/kg treatment than ME 3,100 kcal/kg treatment, and the FC/WG of CP 17, 18% treatment was significantly higher than CP 16% treatment (P<0.05). Thus, the optimum levels of ME and CP to improve the productivity and feed cost for starting, growing and finishing periods were 2,950 kcal/kg ME, 19% CP 3,000 kcal/kg ME, 18% CP and 3,100 kcal/kg ME, 17 or 16% CP, respectively.

• Journal of the Korea Concrete Institute
• /
• v.23 no.3
• /
• pp.393-400
• /
• 2011

The needs for high strength structural materials have recently increased, because construction and cost efficiencies are demanded by the costumers. But, the use of high strength reinforcing bars requires longer development and splice lengths compared to normal strength bars. This restriction may cause reduction in construction efficiency and require more complicated details. The purpose of this paper is to evaluate the bond strength on the rib shape of reinforcing bars to decrease development and splice lengths of high strength reinforcements. Total of 5 simple beam specimens were tested, and the main test variable was a rib shape of reinforcing bars. Test data was analyzed in the viewpoint of bond strength, load-deflection relationship, and crack pattern. Test results indicated that the bond strength of high relative rib area reinforcing bars increased up to 11% compared to normal strength reinforcements. And the improved rib shape reinforcements, which were formed with high and low height rib, increased the bond strength up to 23% even though the relative rib area was same as the high relative rib area reinforcements. Serviceability performances such as deflection number of cracking, and maximum crack width were similar in all specimens, so it is safe to conclude that the improved rib shape reinforcements can be applied to the structural members.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.783-790
• /
• 2024

This study aimed to investigate the impact of arthritis self-management education on changes in arthritis-related knowledge levels and arthritis-specific self-efficacy among elderly individuals at a senior center. This study was conducted with one group pre-test and post-test design. The participants included 48 elderly individuals who utilized four senior centers, and they received arthritis self-management education for three weeks. Data analysis used a paired t-test to compare the effects before and after education. The results of the study showed that arthritis self-management education significantly increased arthritis-related knowledge (t=9.17, p<0.001) and arthritis-specific self-efficacy (t=3.96, p<0.001). There were significant differences in knowledge and self-efficacy levels by age group, with the results varying among participants aged 85 and above. These findings suggest that a three-week education program is appropriate for improving arthritis-related knowledge and self-efficacy among the elderly, and that education should be tailored to different age groups.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3177-3183
• /
• 2013

This paper deals with the robust design of the non-asbestos FCM(Fiber-elastomer Coated Metal) gasket. In order to this, the measurement of the shear stress based on the design of experimet using the orthogonal table was carried out and the control factors for shear stress using the larger-the-better SN ratios with the Taguchi method were evaluated. In addition, the analysis of variance for SN ratios was conducted. The temperature, pressure, duration time and humidity were selected as the control factors. The orthogonal table $L_9(3^4)$ was made of 3 levels for each factor and the measurement of shear stress was acomplished on the base of the table. Delta statistics of time is the highest value 0.93 and therefore the time affect the largest effect on the shear stress of gasket. Also from the analysis, the shear stress shows maximun at the duration time 80 sec, temperature $200^{\circ}C$, pressure 90 $kgf/cm^2$, humidity 60 %RH. P values of duration time and temperature as a results of the analysis of variance are 0.037 and 0.098. Therefore the analysis has significant each with 95% and 90% confidence level.