• 한국세라믹학회지
• /
• 제37권1호
• /
• pp.6-11
• /
• 2000

Electron emission from the Pb(ZrxTi1-x)O3 ferroelectrics by pulsed electric field has been investigated as a function of Zr/Ti ratios such as 35/65, 50/50 and 65/35 below 250kV/cm. Electrons were emitted regardless of the applied field polarity to the rear electrode. When the negative field was applied to the rear electrode, the electron emission charge was more stable. It was proved that the electrons were emitted at the edge of the upper electrode. The emission charge increased in order of 65/35>50/50>35/65. The electron emission characteristics were dependent on the ferroelectric properties such as polarization and coercive field. The emission charge and emission threshold field were affected by the polarization change and the coercive field, respectively. This result explains that the electron emission is a field emission with polarization induced surface potential by a modified Fowler-Nordheim plot of emission charge.

• 마이크로전자및패키징학회지
• /
• 제23권3호
• /
• pp.7-14
• /
• 2016

High junction temperature directly or indirectly affects the optical performance and reliability of high power LEDs in many ways. This paper is focused on junction temperature characterization of LEDs. High power LEDs (3W) were tested in temperature steps to reach a thermal equilibrium condition between the chamber and the LEDs. The LEDs were generated by pulsed currents with duty ratios (0.091% and 0.061%) in multiple steps from 0mA and 700mA. The diode forward voltages corresponding to the short pulsed currents were monitored to correlate junction temperatures with the forward voltage responses for calibration measurement. In junction temperature measurement, forward voltage responses at different current levels were used to estimate junction temperatures. Finally junction temperatures in multiple steps of currents were estimated in effectively controlled conditions for designing the reliability of LEDs.

• Bulletin of the Korean Chemical Society
• /
• 제13권5호
• /
• pp.553-556
• /
• 1992

The ${CO}_2$ laser absorption measurement of ${CH}_3{CH}_2Br$ utilizing photoacoustic (PA) technique was performed using a cw and a pulsed ${CO}_2$ lasers. The absorption profile in the ${CO}_2$ laser wavelength region (9-10 ${\mu}$m) and the macroscopic small signal absorption cross section at 10P(20) (10.59 ${\mu}$m, 944 $cm^{-1}$) laser line were measured using a cw ${CO}_2$ laser. The laser fluence dependence on infrared multiphoton absorption (IRMPA) was also studied with a pulsed TEA ${CO}_2$ laser at 10P(20) laser line. In view of monotonic increase of PA signal with the rise of laser fluence, it was suggested that the anharmonicity in pumped vibration mode did not restrict ir multiphoton absorption in ${CH}_3{CH}_2Br$ system as found in large molecular system.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.331-338
• /
• 2013

We present a few significant advances in methods and concepts of magnetic measurements, aimed both at providing novel routes in the characterization of hard and soft magnetic materials and at improving our basic knowledge of the magnetization process. We discuss, in particular, investigation methods and experimental arrangements that have been developed in recent times for: 1) Hysteresis loop determination in extra-hard magnets by means of Pulsed Field Magnetometry; 2) Broadband observation of domain wall dynamics by highspeed stroboscopical Kerr techniques; 3) Entropy measurements in magnetocaloric materials by calorimetry in magnetic field. While pertaining to somewhat independent fields of investigation, all these measuring techniques have in common a solid approach to the underlying physical phenomenology and have a potential for further developments.

• 한국자기학회지
• /
• 제21권3호
• /
• pp.88-92
• /
• 2011

Pulsed Laser Deposition 방법을 사용하여 $Zn_{0.4}Fe_{2.6}O_4$ 박막을 증착하였으며 이의 결정성 및 자기적 특성을 증착온도의 함수로 조사하였다. 증착온도가 $300^{\circ}C$었을 경우 박막은 코런돔(corundom) ${\alpha}-$Fe_2O_3$ 또는 워자이트(wurzite) ZnO 구조를 지니고 있었으나 증착온도가 $500^{\circ}C$로 증가되었을 경우에는 $Zn_{0.4}Fe_{2.6}O_4(111)/Al_2O_3(0001)$의 결정 방향을 지닌 매우 안정된 역스피넬(inverse spinel) 성장이 이루어졌으며 또한 표면의 거칠기도 증착온도가 $300^{\circ}C$ 일 때 보다 더 평평하여졌다. 이러한 역스피넬 $Zn_{0.4}Fe_{2.6_O_4$ 박막에서는 X-선 산란 분석 결과 ${\alpha}-$Fe_2O_3$, ZnO에 해당하는 픽들은 전혀 관측되지 않았으며 이러한 사실들은 Zn가 증착온도를 높여줌에 따라 역스피넬의 사면체 자리에 치환되었음을 의미한다. M-H 곡선의 측정 결과 증착온도 $300^{\circ}C$ 박막은 자성 특성이 거의 관측되지 않은 반면 $500^{\circ}C$ 박막의 경우에는 매우 뚜렷한 강자성 특성을 확인할 수 있었으며 벌크보다 작은 포화자화 값은 팔면체 자리의 Fe 스핀들의 삐뚤림(canting)에 의한 것으로 이해된다.

• 한국진공학회지
• /
• 제21권5호
• /
• pp.258-263
• /
• 2012

펄스레이저 증착법으로 P형 실리콘(100) 기판위에 증착한 Fe 희석된 Si 합금의 구조와 전기적 및 자기적 물성을 연구하였다. 합금시료에 대한 X-선 회절패턴에서 육방정계에 해당하는 FeSi, $Fe_3Si$, 및 $Fe_5Si_3$와 관련된 여러 개의 회절신호가 관측되었으며, 에너지분산분광 측정에 의한 시료내 Fe 원자의 함량은 1.25~6.49 atm, %로 나타났다. 또한, 온도변화에 따른 전기비저항 값의 측정으로부터 5.21 meV와 7.79 meV 두 개의 활성화에너지를 얻을 수 있었다. 절대온도 10 K에서 측정한 최대 자화는 약 100 emu/cc로 나타났으며, 3,000 Oe의 외부자기장하에서 온도의 함수로 측정한 자화 값으로부터 시료의 강자성 특성은 350 K까지도 유지됨을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제23권3호
• /
• pp.211-215
• /
• 2010

Pulsed laser deposition is a very efficient technique for fabricating thin films of complex compounds. In the present work, $Bi_2O_3$-MgO-ZnO-$Nb_2O_5$ (BMZN) pyrochlore thin films were deposited on platinized Si substrates at various temperatures by using pulsed laser deposition technique. These films have been characterized by X-ray diffractometer (XRD), atomic force microscopy (AFM) to investigate their structural, morphological properties. MIM structure was manufactured to analyze di-electrical properties of BMZN thin films. XRD results reveal the thin films deposited at less than $400^{\circ}C$ show only amorphous phase, the crystallized thin films was observed when the thin films were prepared temperature at above $500^{\circ}C$. From AFM, it was known that the thin film grown at $400^{\circ}C$ is the densest. Dielectric constant increased with increasing temperature up to $400^{\circ}C$ at 100 kHz and dramatically decreased at the higher temperature. A aspect of dissipation factor was the exact opposite of dielectric constant. BMZN thin films grown at $400^{\circ}C$ exhibited a high dielectric constant of 60.9, a low dissipation factor of 0.007 at 100 kHz.

• IMMUNE NETWORK
• /
• 제5권3호
• /
• pp.163-171
• /
• 2005

Background: To perform the successful dendritic cell-based cancer immunotherapy one of the main issues to be solved is the source of antigen for DC pulsing. Limitations occur by using auto-tumor lysate due to the difficulties obtaining enough tumor tissue(s) quantitatively as well as qualitatively. In this study the possibility of allogeneic tumor cell lysate as a DC pulsing antigen has been tested in mouse melanoma pulmonary me tastasis model. Methods: B16F10 melanoma cells $(1{\timeS}10^5/mouse)$ were inoculated intra venously into the C57BL/6 mouse. Therapeutic DCs were cultured from the bone marrow myeloid lineage cells with GM-CSF and IL-4 (1,000 U/ml each) for 7 days and pulsed with lysate of either autologous B16F10 (B-DC), allogeneic K1735 (C3H/He origin; K-DC) or CloneM3 (DBA2 origin; C-DC) melanoma cells for 18 hrs. Pulsed-DCs $(1{\times}10^6/mouse)_{[CGP1]}$ were injected i.p. twice with one week interval starting from the day 1 after tumor cell inoculation. Results: Without observable toxicity, allogeneic tumor cell lysate pulsed-DC induced the significantly better anti-tumor response (tumor scale: $2.7{\pm}0.3,\;0.7{\pm}0.3\;and\;0.3{\pm}0.2$ for saline, B-DC and C-DC treated group, respectively). Along with increased tumor specific lymphocyte proliferations, induction of IFN-${\gamma}$ secretion against both auto- and allo-tumor cell lysates was observed from the DC treated mice. (w/B16F10-lysate: $44.97{\pm}10.31,\;1787.94{\pm}131.18,\;1257.15{\pm}48.27$, w/CloneM3 lysate: 0, $1591.13{\pm}1.83,\;1460.47{\pm}86.05pg/ml$ for saline, B-DC and C-DC treated group, respectively) Natural killer cell activity was also increased in the mice treated with tumor cell lysate pulsed-DC ($8.9{\pm}_{[CGP2]}0.1,\;11.6{\pm}0.8\;and\;12.6{\pm}0.7%$ specific NK activity for saline, B-DC and C-DC treated group, respectively). Conclusion: Conclusively, promising data were obtained that allogeneic-tumor cell lysate can be used as a tumor antigen for DC-based cancer immunotherapy.

• 한국식품저장유통학회지
• /
• 제20권5호
• /
• pp.650-658
• /
• 2013

전기장의 세기 20 kV/cm, 펄스 폭 25 ${\mu}s$에서 펄스 빈도 35 Hz(40 kJ/L), 55 Hz(70 kJ/L), 72 Hz(100 kJ/L) 및 85 Hz(130 kJ/L)로 달리하여 투입 에너지를 기준으로 사과 착즙액의 PEF 연속처리 살균 효과를 분석한 결과 일반세균수은 초기 5.3 log CFU/mL에서 130 kJ/L의 에너지로 처리하였을 때 3.0 log CFU/mL로 감소하였고 효모 및 곰팡이는 초기 4.6 log CFU/mL에서 130 kJ/L의 에너지로 처리로 < $10^1$ CFU/mL 이하로 감소하였다. 그리고 대장균군수도 초기 4.7 log CFU/mL에서 130 kJ/L의 에너지 처리로 < $10^1$ CFU/mL 이하로 감소하였다. PEF 처리에 따른 가용성 고형분, 유리당 등에는 처리 조건에 따른 유의적 차이가 없었으며(p<0.05), 총 페놀함량, DDPH 및 FRAP 값은 처리조건에 따라 부분적으로 유의적인 감소를 보였지만 $65^{\circ}C$에서의 가열처리보다는 감소량이 작았다. 전기장 세기 20.0 kV/cm, 펄스 빈도 85 Hz, 펄스 폭 25 ${\mu}s$에서의 반복처리는 미생물 살균 효과가 제한적이었고 처리회수에 따라 총 페놀함량, DPPH 및 FRAP 값을 유의적(p<0.05)으로 감소시켰다.

• Advances in nano research
• /
• 제1권4호
• /
• pp.219-228
• /
• 2013

We report on the preparation of iron pyrite ($FeS_2$) using pulsed electron ablation of two targets, namely, a mixture of sulfur and iron compound target, and a natural iron pyrite target. Thin films of around 50 nm in thickness have been deposited on glass substrates under Argon background gas at 3 mTorr, and at a substrate temperature of up to $450^{\circ}C$. The thin films have been analyzed chemically and examined structurally using x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), and visible Raman spectroscopy. The morphology and thickness of the films have been assessed using scanning electron microscopy (SEM) and visible spectroscopic reflectance. The preliminary findings, using a synthetic target, show the presence of iron pyrite with increasing proportion as substrate temperature is increased from $150^{\circ}C$ to $250^{\circ}C$. The data have not shown any evidence of pyrite in the deposited films from a natural target.