• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.120-126
• /
• 1997

In this study, an effective estimation method of wheel acceleration is presented. The wheel acceleration is mainly used in the ABS(anti-lick brake system) and the TCS(traction control system). The wheel acceleration is a derivative term of the wheel speed which is generally measured by the wheel speed sensors. The results of a simple differentiation of the signal and an observation of the signal by Kalman filter show that Kalman filter has better performance than the simple differentiation. The differentiated sine signal which is contaminated with random noise shows a rugged signal compared with the signal which is filtered by the Kalman filter. The covariance of the differentiated signal is higher than that of the Kalman-filtered signal, too. The presented Kalman filter technique shows an effective way of solution to get the estimated wheel acceleration value which is sufficient to be applied to ABS or TCS control algorithms.

• 한국정밀공학회지
• /
• 제8권2호
• /
• pp.106-113
• /
• 1991

A diamond grinding wheel is generally used to grind hard and brittle materials, such as advanced ceramics. It is, however, quite difficult to dress a diamond grinding wheel efficiently because of its high degree of hardness. In this study, some investigations are carried out to increase dressing efficiecy of resinoid bonded diamond grinding wheel. Dressing forces are measured over a wide range of dressing conditions, and SEM observation of a grinding wheel is carried out. Special attention is paid to comparison between stick method and rotary brake method. Results obtained in this study provide useful information determining reguired dressing time, and for choosing efficient dressing condition for diamond grinding wheel.

• 한국철도학회논문집
• /
• 제6권2호
• /
• pp.142-148
• /
• 2003

A wheel and axle failure can cause a derailment with its attendant loss of life and property. The service conditions of railway vehicles have become severe in recent years due to a general increase in operating speeds. Damages of railway wheel are a spatting by wheel/rail contact and thermal crack by braking heat etc. One of the main source of damage is a residual stress. therefore it is important to evaluate exactly. A Residual stress of wheel is formed at the process of heat treatment when manufacturing. it is changed by contact stress developed by wheel/rail contact. Distributions of residual stress vary according to a magnitude of wheel load, a magnitude of friction when acceleration and deceleration. The objective of this paper is to estimate the influence of wheel motion on the residual stress distribution in the vicinity of the running surface.

• 자동차안전학회지
• /
• 제11권2호
• /
• pp.23-28
• /
• 2019

This paper presents an optimal performance of rear wheel steering vehicle for maneuverability. The maneuverability of vehicle is evaluated in terms of yaw rate, body slip angle and driver input. The maneuverability of vehicle can be improved by rear wheel steering system. To obtain optimal performance of rear wheel steering vehicle, the optimal control history is designed. The high dimensional trajectory optimization problem is solved by formulating a quadratic program considering rear wheel steer input. To evaluate handling performance 7 degree-of-freedom vehicle model with actuation sub-models is designed. A step steer test is conducted to evaluate rear wheel steering vehicle. A response time, a TB factor, overshoot, and yaw rate gain are investigated through objective criteria, assessment webs. The handling performance of vehicle is evaluated via computer simulations. It has been shown from simulation studies that optimal controlled rear wheel steering vehicle provides improved performance compared to others.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.89.2-89
• /
• 2001

Wheel chair bound persons need assistance since there are many steps or curbs or other obstacles blocking their path in the roadways and walkways. Although a step may be small, it may be very difficult for such a person to climb over it. Therefore, we are proposing a power assist wheel chair robot that enables a wheel chair bound person to climb over steps up to about 10 centimeters in height without assistance from others. By using the proposed wheel chair robot, a user can maintain inverse pendulum control after raising its front wheels Then, a user can move forward to the step maintaining the inverse pendulum control, and can climb over the step using motor force of a rear wheel shaft ...

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.101-107
• /
• 1997

In general, grinding is one of the final machining processes which determines the surface quality of machined products. Since the ground surface is affected by the states of grains and voids on the grinding wheel surface, the wheel should be dressed before the machined surface deteriorates over a quality limit This paper describes a systematic approach to decide a proper dressing chance and an optimal dressing depth for the working grinding wheel. An eddy current sensor and a laser displacement sensor are used to measure the loading on the working wheel surface and the topography of the dressed wheel surface respec- tively. The dressing chance can be properly decided through the relational locus between the amount of handing and the machined surface roughness. An optimal dressing depth to guarantee the less wheel loss and the higher wheel surface quality is decided through the analysis of the variance of topography for the dressed wheel surface, which decreases at three different rates according to the accumulated dressing depth.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1851-1855
• /
• 2011

휠-레일 접촉해석의 정밀도는 휠과 레일의 접촉 위치 분석 방법 및 접촉력 계산 방법에 따라 결정된다. 휠과 레일의 형상을 2차원 곡선접촉으로 가정하여 휠-레일 접촉 위치를 찾는 방법은 계산시간이 짧은 장점이 있지만 3차원 곡면으로 가정한 경우에 비해 근사화된 해를 가지는 단점이 있다. 본 연구에서는 2차원 곡선접촉 해석에 기인한 방법과 3차원 곡면으로 가정한 방법에 대한 휠셋의 동특성 해석 결과을 비교하고자 한다. 곡선 주행시 휠셋 중심에 대해 요 각도 및 횡변위 등의 해석결과를 비교하고자 한다.

• International journal of advanced smart convergence
• /
• 제11권2호
• /
• pp.219-225
• /
• 2022

Recently, the popularization of personal mobility(PM) has made it possible to see many electric scooters. The energy source of personal transportation used by the general public and the disabled can be seen as environmentally friendly as electricity. Personal transportation means are divided into small electric vehicles because they use electric energy, and they are being treated as new models by automobile manufacturers in each country and spurring development. On the other hand, personal transportation means may cause various types of traffic accidents as they travel between roads and a human walk. In order to prevent such accidents, it is judged that the enactment of laws on the establishment of specifications for electric scooters, which are personal transportation means, and the method of restricting road operation should be given priority. The electric scooter is basically different from the conventional vehicle. The steering shaft of the steering system applied to the electric scooter one to two is possible. 1 to 2 the front-wheel under the steering column is used. It is classified according to the number of wheel installed at the electric scooter is the vehicle body into 2 wheel - electric scooter, and 3 wheel - electric scooter and 4 wheel - electric scooter. In this study, we propose a steering shaft design model that can be applied to an electric scooter, one of personal transportation means. A design model for 1-shaft steering and 2-shafts steering that can be applied to electric scooters is proposed. In addition, we have produced the prototypes for the commercialization of the proposed models, and reviewed the pros and cons of the manufactured prototypes and models.

• 한국정밀공학회지
• /
• 제30권1호
• /
• pp.32-38
• /
• 2013

Small mobile robots which use round wheels are suitable for driving on a flat surface, but it cannot climb the obstacle whose height is greater than the radius of wheels. As an alternative, legged-wheels have been proposed by many researchers due to its better climbing performance. However, driving and climbing performances have a trade-off relationship so that their driving performance should be sacrificed. In this study, in order to achieve both driving and climbing performances, a new transformable wheel was developed. The developed transformable wheel can have a round shape on a flat surface and change its shape into legged-wheel when it makes a contact with an obstacle. For design of the transformable wheel, the performance of legged-wheel was analyzed with respect to the number and curvature of the leg, and then the new transformable wheel was designed based on the analysis. Contrary to the existing transformable wheels that contain additional actuators for the transformation, the developed transformable wheel can be unfolded without any additional actuator. In this study, in order to validate the transformable wheel, a simple robot platform was fabricated. Consequently, it climbed the obstacle whose height is 2.6 times greater than the wheel radius.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2307-2316
• /
• 2017

The aim of this paper is to provide an optimal design of in-wheel motor for an electric scooter (E-scooter) considering economical production. The preliminary development in-wheel motor, which has a direct-driven outer rotor type attached to the E-scooter's rear wheel without any gear, is introduced first. The objective of the optimal design of this in-wheel motor is to improve the output characteristics of the motor and to have a stator form to facilitate automatic winding. Response surface methodology was used for the optimal design and 2-dimensional finite element method was used for electro-magnetic field analysis. Experimental results showed that the designed and fabricated in-wheel motor could satisfy the required specifications in terms of speed, power, efficiency, and cogging torque.