DOI QR코드

DOI QR Code

An Experimental Study of Optimal Performance of Rear Wheel Steering Vehicle for Maneuverability

기동성을 위한 후륜 조향 차량의 최적 성능에 대한 연구

  • 안국진 (서울대학교 공과대학 기계항공공학부) ;
  • 좌은혁 (서울대학교 공과대학 기계항공공학부) ;
  • 박관우 (서울대학교 공과대학 기계항공공학부) ;
  • 윤영식 (현대자동차) ;
  • 이경수 (서울대학교 공과대학 기계항공공학부)
  • Received : 2018.11.30
  • Accepted : 2019.06.13
  • Published : 2019.06.30

Abstract

This paper presents an optimal performance of rear wheel steering vehicle for maneuverability. The maneuverability of vehicle is evaluated in terms of yaw rate, body slip angle and driver input. The maneuverability of vehicle can be improved by rear wheel steering system. To obtain optimal performance of rear wheel steering vehicle, the optimal control history is designed. The high dimensional trajectory optimization problem is solved by formulating a quadratic program considering rear wheel steer input. To evaluate handling performance 7 degree-of-freedom vehicle model with actuation sub-models is designed. A step steer test is conducted to evaluate rear wheel steering vehicle. A response time, a TB factor, overshoot, and yaw rate gain are investigated through objective criteria, assessment webs. The handling performance of vehicle is evaluated via computer simulations. It has been shown from simulation studies that optimal controlled rear wheel steering vehicle provides improved performance compared to others.

Keywords

JCOJAX_2019_v11n2_23_f0001.png 이미지

Fig. 1 완전 차량 모델

JCOJAX_2019_v11n2_23_f0002.png 이미지

Fig. 2 피드포워드 게인

JCOJAX_2019_v11n2_23_f0003.png 이미지

Fig. 3 후륜 조향 차량의 성능 분석을 위한 오프라인 최적화 구성

JCOJAX_2019_v11n2_23_f0004.png 이미지

Fig. 4 단계 조향각 시험: 30kph

JCOJAX_2019_v11n2_23_f0005.png 이미지

Fig. 5 단계 조향각 시험: 110kph

JCOJAX_2019_v11n2_23_f0006.png 이미지

Fig. 6 평가 웹: 단계 조향각 시험

References

  1. Data, S. and F. Frigerio., 2002, "Objective evaluation of handling quality", Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 216.4, pp. 297-305. https://doi.org/10.1243/0954407021529129
  2. Wagner, S., et al., 2017, "Design and assessment of optimal feedforward control for active steering configurations in passenger vehicles", Vehicle system dynamics 55.8, pp. 1123-1142. https://doi.org/10.1080/00423114.2017.1305113
  3. Schuller, J., Haque, I., and Eckel, M., 2002, An approach for optimisation of vehicle handling behaviour in simulation. Vehicle System Dynamics, 37(sup1), 24-37. https://doi.org/10.1080/00423114.2002.11666218
  4. Laine, Leo, Sogol Kharrazi, and Nicolas Dela., 2008, "Proposal for using sine with dwell on low friction for the evaluation of yaw stability for heavy vehicle combinations", Vehicular Electronics and Safety, 2008. ICVES 2008. IEEE International Conference on. IEEE, 2008.
  5. Miura, Yumiko, Hiroshi Tokutake, and Katsuhiko Fukui., 2007, "Handling qualities evaluation method based on actual driver characteristics", Vehicle System Dynamics 45.9, pp. 807-817. https://doi.org/10.1080/00423110601127810
  6. Ishio, Jun, et al., 2008, "Vehicle-handling quality evaluation through model-based driver steering behaviour", Vehicle System Dynamics 46.S1, pp. 549-560. https://doi.org/10.1080/00423110801993169
  7. Perantoni, G. and Limebeer, D. J., 2015, Optimal control of a formula one car on a three-dimensional track-Part 1: Track modeling and identification. Journal of Dynamic Systems, Measurement, and Control, 137(5), 051018. https://doi.org/10.1115/1.4028253
  8. Limebeer, D. J. and Perantoni, G., 2015, Optimal control of a formula one car on a threedimensional track-Part 2: Optimal control. Journal of Dynamic Systems, Measurement, and Control, 137(5), 051019. https://doi.org/10.1115/1.4029466
  9. Smith, E. N., Velenis, E., Tavernini, D., and Cao, D., 2018, Effect of handling characteristics on minimum time cornering with torque vectoring. Vehicle System Dynamics, 56(2), 221-248. https://doi.org/10.1080/00423114.2017.1371771
  10. de Castro, R., Tanelli, M., Araujo, R. E., and Savaresi, S. M., 2014, Minimum-time manoeuvring in electric vehicles with four wheel-individualmotors. Vehicle system dynamics, 52(6), 824-846. https://doi.org/10.1080/00423114.2014.902973
  11. Esmailzadeh, E., Goodarzi, A., and Vossoughi, G. R., 2003, Optimal yaw moment control law for improved vehicle handling. Mechatronics, 13(7), 659-675. https://doi.org/10.1016/S0957-4158(02)00036-3
  12. Wagner, S., Schilling, J. M., Braun, J. L., and Prokop, G., 2017, Design and assessment of optimal feedforward control for active steering configurations in passenger vehicles. Vehicle system dynamics, 55(8), 1123-1142. https://doi.org/10.1080/00423114.2017.1305113
  13. Patterson, M. A. and Rao, A. V., 2014, GPOPS-II: A MATLAB software for solving multiplephase optimal control problems using hp-adaptive Gaussian quadrature collocation methods and sparse nonlinear programming. ACM Transactions on Mathematical Software (TOMS), 41(1), 1. https://doi.org/10.1145/2558904