• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.05a
• /
• pp.138-141
• /
• 2000

공정제어시스템을 위한 제어기로써 현재까지는 PID 제어기가 보편화되어 적용되어 왔으나 비선형 시스템이나 복잡한 시스템 제어를 위해서는 목표치 추종특성이 우수하며 환경이나 공정 파라미터변화에 둔감하여 외란에 대한 영향이 적은 제어기가 요구된다. PID 제어기로는 이러한 목적을 달성하는 데에 한계가 있기 때문에 이를 해결하기 위한 연구들이 활발히 수행되어 목표치 추종성능과 외란 억제를 동시에 만족토록 하는 다양한 2자유도 PID 제어시스템들이 제안되었고, 본 연구에서는 먼저 현재까지 제안된 2자유도 PID 제어시스템들 중 제어성능이 가장 우수한 것으로 나타난 목표치 필터형 2자유도 PID 제어시스템(Target Value Filter Type 2-DOF PID Control System: 이하 TVF-2DOF) [2]보다 우수한 2자유도PID 제어시스템을 제안하고, 이를 바탕으로 2자유도 선행필터(Pre-Filter)부분에 지능제어기법의 하나인 퍼지로직을 적용함으로써 PID 제어기의 장점과 퍼지로직의 장점을 동시에 활용하는 지능형 튜닝(Tuning)기법에 관한 연구를 수행하였고, 지능형 시스템이 2자유도 PID 제어시스템들보다 목표치 추종 성능 및 외란억제효과가 우수하다는 사실을 컴퓨터 시뮬레이션을 통해 입증하였다. 시스템으로는 유량 제어 밸브가 사용되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1792-1795
• /
• 1997

It is difficulte to control in the flow system because there are many disturbance. So it is impossible to control delicately sometimes by PI or PID. In this paper, we study on the application of intellignet control algorithms such as 2DOF PID control, neural network, Fuzzy contro, Relay feedback to the flow control system. the resultings are 2DOF-PID control is more good response.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.1
• /
• pp.78-84
• /
• 1998

The fluid system such as, the quantity control of raw water, chemicals control in the purification, the waste water system as well as in the feed water or circulation system of the power plant and the ventilation system is controlled with the valve and moter pump. The system's performance and the energy saving of the fluid systems depend on control of method and delicacy. Until, PI controller use in these system but it cannot control delicately because of the coupling in the system loop. In this paper we configure a single flow system to the multi variable system and suggest the application of 2-DOF PID controller and the tuning methods by the neural network to the electrical power of the flow control system. the 2-DOF controller follows to a setpoint has a robustness against the disturbance in the results of simulation. Keywords Title, Intelligent control, Neuro control, Flow control, 2 - DOF control., 2 - DOF control.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.52-58
• /
• 2005

Among various modern control theories, PID control has been well used for several decades. PID algorithms need some tuning methods which are used for selecting PID parameters. But in some cases various kinds of performance indices are used instead of well-known tuning rules, and so variable type of performance index must be tested so that controllers, output characteristics and disturbance rejection property meet some specifications. In this paper, linear conbinational type of performance index using error signal, time, control input and robustness is used to the PID control of air conditioning system. By use of the 2 DOF PID parmeters minimizing perfromacne index controllers, output characteristics and robustness properties are analyzed. Simulations are done by use of MATLAB with Simulink.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.90-94
• /
• 2004

Among various modern control theories, PID control has been well used for several decades. PID algorithms needs son tuning methods are used for selecting PID parameters. But in some cases various kinds of performance indices are used instead of well-known tuning rules, and so variable type of performance index must be tested so that controllers, output characteristics and disturbance rejection property meets some specifications. In this paper, linear conbinational type of performance using error signal, time, control input and robustness is used to the PID control of air conditioning system. By the 2 DOF PID parmeters minimizing perfromacne index, controllers, output characteristics and robustness properties are analyzed. Simulations are done with MATLAB m file and mdl files.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.2
• /
• pp.61-68
• /
• 2005

This paper is concerned with attitude control of 2 rotor 1 DOF aerial vehicle. The proposed controller consists of two parts: the attitude estimation filter part and PID controller part. For attitude estimation, performance of 3 different filters (complementary filters, Kalman filter, indirect Kalman filters) are tested and compared. For the PID controller, characteristic ratio assignment methods are used to assign PID coefficients. Through experiments, it is shown that attitude of the vehicle successfully follows the step command.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.101.3-101
• /
• 2002

Contents 1 Abstract- In the thermal power plant, there are six manipulated variables; main steam flow, feedwater flow, air flow, spray flow, fuel flow, and gas recirculation flow. Therefore, the thermal power plant control system is a multi-input and output system. In the control system, the main steam temperature typically is regulated by the fuel flow rate and the spray flow rate, and the reheater steam temperature is regulated by the gas recirculation flow rate. Up to the present time, the PID controller has been used to operate this system. This paper focuses on the characteristic comparison of the PID controller, the modified 2-DOF PID Controller on the DCS, in order to design an optimal...

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.397-402
• /
• 1998

PID controller has been used very widely in the industrial applications. But it is difficult tune the PID gains. In this paper, we present a design of optimal 2-DOF PID controller for control of container crane which has to control swing motion and trolley position. For tuning of the 2-DOF PID control gains, we used hybrid evolution program(EP). During operate the crane system in yard, the goal is transporting the load to a goal position as quick as possible without rope oscillation. The crane is generally operated by an expert operator, but recently an automatic control system with high accuracy and rapid transportation is required. However, we developed an optimal controller which has to control the crane system with disturbance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.39-47
• /
• 2014

In this study, 2 degree of freedom PID controller is added to the conventional feed-forward controller for the purpose of improving its limitations such as set-point of tracking performance and disturbance suppression performance in the conventional PID controller. And the controller parameters optimization as a Real Coded Genetic Algorithm (RCGA) is used. Simulation and experiments verify the performance of the controller.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.30-37
• /
• 2000

We studied on acquiring of transfer function and tuning of 2-DOF PID controller using ANFIS for the optimum control to turbine's variables variety. Since the shape of a membership function in the ANFIS based on the characteristics of plant. ANFIS based control method is effective for plant that its variable vary. On the other hand, a start-up time is very short and its variable's value for optimal start-up in gas turbine should be varied, but it is very difficult for such a controller to design. In this paper, we tune 2-DOF PID controller after apply a ANFIS to the operating data of Gun-san gas turbine and verify the characteristics. Its results is compared to the conventional PID controller and discuss. We expect this method will be used for another process because it is studied on the real operating data.