• 전자공학회논문지
• /
• 제51권5호
• /
• pp.188-194
• /
• 2014

계산적 청각 장면 분석 시스템의 특징 추출은 시간 연속성과 주파수 채널간에 유사성을 이용하여 청각 요소의 상관지도를 구성한다. 세그먼테이션은 상호상관계수 함수를 이용하여 2진 마스크를 구성하고, 마스크 성분 1(음성)은 동일한 주기성과 동기를 가진다. 그러나 채널간에 비슷한 주기성을 갖지만 지연이 있는 경우에 음성으로 잘못 결정되는 문제가 있다. 본 논문에서는 세그먼테이션에서 가중치 상호상관계수를 이용해 채널간에 유사성의 변별력을 높이는 방법을 제안한다. 계산적 청각 장면 분석 시스템의 음성분리 성능을 평가하기 위하여 배경 잡음(사이렌, 기계, 백색, 자동차, 군중) 환경에서 신호 대 잡음비(5dB, 0dB)의 변화에 따라 실험을 수행하였다. 본 논문에서는 기존의 방법과 제안한 방법과 비교한 결과, 제안한 방법이 기존의 방법에 비하여 각각 신호 대 잡음비 5dB에서 2.75dB 그리고 0dB에서 4.84dB 향상되었다.

• 천문학회지
• /
• 제35권3호
• /
• pp.111-121
• /
• 2002

We have measured the correlation functions of the optically selected clusters of galaxies in the Abell and the APM catalogs, and of the X-ray clusters in the X-ray-Brightest Abell-type Clusters of galaxies (XBACs) catalog and the Brightest Clusters Sample (BCS). The same analysis method and the same method of characterizing the resulting correlation functions are applied to all observational samples. We have found that the amplitude of the correlation function of the APM clusters is much higher than what has been previously claimed, in particular for richer subsamples. The correlation length of the APM clusters with the richness R $\ge$ 70 (as defined by the APM team) is found to be $r_0 = 25.4_{-3.0}^{+3.1}\;h^{-1}$ Mpc. The amplitude of correlation function is about 2.4 times higher than that of Croft et al. (1997). The correlation lengths of the Abell clusters with the richness class RC $\ge$ 0 and 1 are measured to be $r_0 = 17.4_{-1.1}^{+1.2}$ and $21.0_{-2.8}^{+2.8}\;h^{-1}$ Mpc, respectively, which is consistent with our results for the APM sample at the similar level of richness. The richness dependence of cluster correlations is found to be $r_0= 0.40d_c + 3.2$ where $d_c$ is the mean intercluster separation. This is identical in slope with the Bahcall & West (1992)'s estimate, but is inconsistent with the weak dependence of Croft et al. (1997). The X-ray bright Abell clusters in the XBACs catalog and the X-ray selected clusters in the BCS catalog show strong clustering. The correlation length of the XBACs clusters with $L_x {\ge}0.65{\times} 10^{44}\;h^{-2}erg\;s^{-1}$ is $30.3_{-6.5}^{+8.2}\;h^{-1}$ Mpc, and that of the BCS clusters with $L_x {\ge}0.70{\times} 10^{44}\;h^{-2}erg\;s^{-1}$ is $30.2_{-8.9}^{+9.8}\;h^{-1}$ Mpc. The clustering strength of the X-ray clusters is much weaker than what is expected from the optical clusters.

• 생물정신의학
• /
• 제24권3호
• /
• pp.142-148
• /
• 2017

Objectives The ratio of second to fourth digit length (2D : 4D) could be a potential epigenetic marker of sexual dimorphism reflecting prenatal testosterone exposure. Testosterone is known to affect the development of the brain through an epigenetic mechanism. The purpose of this study was to investigate the effects of exposure to fetal testosterone on the metabolic syndrome based on 2D : 4D of schizophrenia patients and the relationship with the age of onset of schizophrenia. Methods A total of 214 schizophrenia patients participated in this study. The participant's physical and blood tests were performed according to the American National Cholesterol Education Program's Third Amendment of the Metabolic Syndrome Diagnostic Criteria, and the 2D : 4D was measured by the method designed by McFadden. Data were statistically analyzed by t-test, Pearson's correlation analysis and multiple regression model analysis. Results 2D : 4D was significantly higher in female than male in both hands, and there was a statistically significant negative correlation between 2D : 4D and the age of onset of schizophrenia in male. However, 2D : 4D did not show statistically significant correlation with metabolic factors. Conclusions Fetal testosterone suggests the possibility of affecting the age of onset of schizophrenia through the epigenetic mechanism, but there is no clear relationship with metabolic factors.

• 대한치과보철학회지
• /
• 제25권1호
• /
• pp.71-94
• /
• 1987

This study was carried out to investigate the sound distortion following the alternation of the palatal plate thickness. For this study, 2 healthy male subjects (24-year-old) were selected. Born in Seoul, they both spoke Seoul dialect. First, their sounds of /na(나)/, /da(다)/, /1a(라)/, /ja(자)/, /cha(차)/, /ta(타)/, without inserting plates were recorded, and then the sounds with palatal plates of different thickness were recorded, successively. The plate was fabricated in 3 types, each palatal thickness being 1.0mm, 2.5mm, dentoalveolar portion 2.5mm, other residual portion was 1.0mm, successively. Each type plates named B, C, D-type, in succession. Series of analysis were administered through Computer(16 bit) to analyze the sound distortions. These experiments were analyzed by the LPC (without weighting, pre-weighting, post-weighting) of the consonants, vowels portion, formant frequency of the vowels and word duration of the consonants. The findings led to the following conclusions: 1. There was no correlation of the distortion rate on the 2 informants. 2. Generally, vowels were not affected by the palatal plate thickness in the formant analysis, however, more distortion was detected in the LPC analysis, especially C, D-type plates. 3. Consonants distortion was more evident in the C, D-type plate. 4. The second formant was most disturbed and reduced in the all consonants with insertion of the palatal plate, especially C, D-type plate. 5. Word duration was shortened in the plate inserted(except /ja/, /cha/), especially C, D-type. 6. It was found that dentoalveolar, hard palatal sounds were severely distorted in plate inserted, and they were mainly affected by the dentoalveolar portion thickness. 7. There was correlation between palatal thickness and consonants quality.

• 전기학회논문지P
• /
• 제58권2호
• /
• pp.172-177
• /
• 2009

Most of the causes of the failures of power transformers in operations are mechanical defects due to vibration. To identify these causes, the vibration phenomenon was measured from the power transformers in operation in the substations under the Daejeon power transmission district office of KEPCO. The measurement was performed in a 6${times}$4 structure on one side of the transformer. The vibration of the measured points was presented in 2D and 3D, and analyzed. The results according to the period in use of the transformer and the load applied to the transformer were analyzed. These results will be used as basic data to establish the vibration standard for the power transformer, In addition, with a load capability and vibration phenomenon correlation and regression analysis to identify by way of function was reached. And the vibration phenomenon pass a years with changes and to analyze correlation, was estimated to bring in the function. And then through the analysis of power transformers to set standards based on vibration data was used to.

• Archives of Plastic Surgery
• /
• 제36권6호
• /
• pp.702-706
• /
• 2009

Purpose: Analysis of lower nose and upper lip asymmetry in patients with unilateral cleft lip nose deformity has been proceeded through direct measurement and photo analysis. But there are limitation in presenting real image because of its 2 dimensional trait. The authors analyzed such an asymmetry using 3D VECTRA system (Canfield, NJ, USA) in quantitative way. Methods: In 25 Patients with unilateral cleft lip nose deformity(male 12, female 13, age ranging from 4 to 19), patients with right side deformity were 10 and left were 15. Analysis of asymmetry was proceeded through 3D VECTRA system. After taking 3 dimensional photo, alar area, upper lip area, nostril perimeter, nostril area, Cupid's bow length, nostril height and nostril width were measured. Correlation coefficient and inter data quotients were calculated. Results: In nostril perimeter, maximal difference of cleft side and non - cleft side was 39.3%, asymmetric quotient Qasy = Qcl/Qncl(Qcl, value of cleft side; Qncl, value of non - cleft side) was ranged from 0.84 to 1.85 and in seven cases the length of cleft side was smaller. In nostril area, maximal difference was 69.6% and in 13 cases cleft side was smaller. In lower nasal area, maximal difference was 37.2% asymmetric quotient Qasy = Qcl/Qncl was ranged from 0.47 to 2.03 and in 20 cases cleft side was smaller. The correlation coefficients of nostril perimeter and area were 0.8345. Conclusion: Using 3D VECTRA system, the authors can measure nostril perimeter and lower nasal area that could not been measured with previous methods. Asymmetry of midface was analyzed through area comparison in quantitative way. Futhermore, post operative change can be measured in quantitative method.

• 대한치과교정학회지
• /
• 제43권2호
• /
• pp.62-73
• /
• 2013

Objective: The purpose of this study was to assess new three-dimensional (3D) cephalometric variables, and to evaluate the relationships among skeletal and dentoalveolar variables through 3D cephalometric analysis. Methods: Cone-beam computed tomography (CBCT) scans were acquired from 38 young adults (18 men and 20 women; $22.6{\pm}3.2$ years) with normal occlusion. Thirty-five landmarks were digitized on the 3D-rendered views. Several measurements were obtained for selected landmarks. Correlations among different variables were calculated by means of Pearson's correlation coefficient values. Results: The body of the mandible had a longer curve length in men ($102.3{\pm}4.4$ mm) than in women ($94.5{\pm}4.7$ mm) (p < 0.001), but there was no significant difference in the maxillary basal curve length. Men had significantly larger facial dimensions, whereas women had a larger gonial angle ($117.0{\pm}4.0$ vs. $113.8{\pm}3.3$; p < 0.001). Strong-to-moderate correlation values were found among the vertical and transverse variables (r = 0.71 to 0.51). Conclusions: The normative values of new 3D cephalometric parameters, including the maxillary and mandibular curve length, were obtained. Strong-to-moderate correlation values were found among several vertical and transverse variables through 3D cephalometric analysis. This method of cephalometric analyses can be useful in diagnosis and treatment planning for patients with dentofacial deformities.

• 대한인간공학회지
• /
• 제34권6호
• /
• pp.583-595
• /
• 2015

Objective: The purpose of this study was to determine the reliability of lower limb joint angles computed with the software ImageJ during jumping movements. Background: Kinematics is the study of bodies in motion without regard to the forces or torques that may produce the motion. The most common method for collecting motion data uses an imaging and motion-caption system to record the 2D or 3D coordinates of markers attached to a moving object, followed by manual or automatic digitizing software. Above all, passive optical motion capture systems (e.g. Vicon system) have been regarded as the gold standards for collecting motion data. On the other hand, ImageJ is used widely for an image analysis as free software, and can collect the 2D coordinates of markers. Although much research has been carried out into the utilizations of the ImageJ software, little is known about their reliability. Method: Seven healthy female students participated as the subject in this study. Seventeen reflective markers were attached on the right and left lower limbs to measure two and three-dimensional joint angular motions. Jump performance was recorded by ten-vicon camera systems (250Hz) and one digital video camera (240Hz). The joint angles of the ankle and knee joints were calculated using 2D (ImageJ) and 3D (Vicon-MX) motion data, respectively. Results: Pearson's correlation coefficients between the two methods were calculated, and significance tests were conducted (${\alpha}=1%$). Correlation coefficients between the two were over 0.98. In Vicon-MX and ImageJ, there is no systematic error by examination of the validity using the Bland-Altman method, and all data are in the 95% limits of agreement. Conclusion: In this study, correlation coefficients are generally high, and the regression line is near the identical line. Therefore, it is considered that motion analysis using ImageJ is a useful tool for evaluation of human movements in various research areas. Application: This result can be utilized as a practical tool to analyze human performance in various fields.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3553-3558
• /
• 2013

The three dimensional-quantitative structure activity relationship (3D-QSAR) studies on chemical features of pyridine-2-amines in the external region of c-Met active site (ER chemical features of pyridine-2-amines) were conducted by docking, comparative molecular field analysis (CoMFA), and topomer CoMFA methods. The CoMFA model obtained the partial least-squares (PLS) statistical results, cross-validated correlation coefficient ($q^2$) of 0.703, non cross-validated correlation coefficient ($r^2$) of 0.947 with standard error of estimate (SEE) of 0.23 and the topomer CoMFA obtained $q^2$ of 0.803, $r^2$ of 0.940, and SEE of 0.24. Further, the test set was applied to validate predictive abilities of models, where the predictive $r^2$ ($r{^2}_{pred}$) for CoMFA and topomer CoMFA models were 0.746 and 0.608, respectively. Each contribution of ER chemical features of pyridine-2-amines to the inhibitory potency showed correlation coefficients, $r^2$ of 0.670 and 0.913 for two core parts, 3-(benzo[d]oxazol-2-yl)pyridine-2-amine and 3-(1-(2,6-dichloro-3-fluorophenyl)ethoxy) pyridine-2-amine, respectively, with corresponding experimental $pIC_{50}$.

• 한국작물학회지
• /
• 제30권4호
• /
• pp.375-380
• /
• 1985

수도 8개 단간계통을 무비, 소비, 보비, 다비의 시비구에 공시하여 수량구요소의 수량에 대한 경노계수와 D$^2$, PCA, Q상관에 의한 Dendrogram을 작성하여 시비량간 및 방법간을 비교한 결과는 다음과 같다. 1. 8개 계통의 형질평균치는 시비량에 따라 큰 차이를 보이지 않았으나 동일시비내 계통간에는 유의차가 있었다. 2. 형질간 유의성 있는 상관을 보인 경우는 많지 않았으며 시비량이 많은 구에서 유의한 상관을 보인 경우가 적었다. 3. 수량구성요소의 수량에 대한 직접효과는 수당입수가 가장 컸고 다음이 주당수수였으며 이들은 다비에서 더욱 커졌다. 수수의 입수를 통고 간접효과가 부로 컸으며 다비에서 더욱 더 컸다. 4. D$^2$, Q상관, PCA에 의한 유사도는 시비량 차이에 따라 큰 차이는 없었으며 3가지 방법간에서는 D$^2$와 Q상관은 완전 일치하였으며 PCA에 의하여서도 이들과 비슷하였다.