Journal of the Ergonomics Society of Korea (대한인간공학회지)

Ergonomics Society of Korea (대한인간공학회)
권호 표지
DOI QR코드

DOI QR Code

The Examination of Reliability of Lower Limb Joint Angles with Free Software ImageJ

  • Received : 2015.08.31
  • Accepted : 2015.10.06
  • Published : 2015.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Objective: The purpose of this study was to determine the reliability of lower limb joint angles computed with the software ImageJ during jumping movements. Background: Kinematics is the study of bodies in motion without regard to the forces or torques that may produce the motion. The most common method for collecting motion data uses an imaging and motion-caption system to record the 2D or 3D coordinates of markers attached to a moving object, followed by manual or automatic digitizing software. Above all, passive optical motion capture systems (e.g. Vicon system) have been regarded as the gold standards for collecting motion data. On the other hand, ImageJ is used widely for an image analysis as free software, and can collect the 2D coordinates of markers. Although much research has been carried out into the utilizations of the ImageJ software, little is known about their reliability. Method: Seven healthy female students participated as the subject in this study. Seventeen reflective markers were attached on the right and left lower limbs to measure two and three-dimensional joint angular motions. Jump performance was recorded by ten-vicon camera systems (250Hz) and one digital video camera (240Hz). The joint angles of the ankle and knee joints were calculated using 2D (ImageJ) and 3D (Vicon-MX) motion data, respectively. Results: Pearson's correlation coefficients between the two methods were calculated, and significance tests were conducted (${\alpha}=1%$). Correlation coefficients between the two were over 0.98. In Vicon-MX and ImageJ, there is no systematic error by examination of the validity using the Bland-Altman method, and all data are in the 95% limits of agreement. Conclusion: In this study, correlation coefficients are generally high, and the regression line is near the identical line. Therefore, it is considered that motion analysis using ImageJ is a useful tool for evaluation of human movements in various research areas. Application: This result can be utilized as a practical tool to analyze human performance in various fields.

Keywords

References

  1. Abramoff, M.D., Magalhaes, P.J. and Ram, S.J., Image processing with ImageJ, Biophotonics International, 11(7), 36-42, 2004.
  2. Areblad, M., Nigg, B.M., Ekstrand, J., Olsson, K.O. and Ekstrom, H., Three-dimensional measurement of rearfoot motion during running, Journal of Biomechanics, 23(9), 933-940, 1990. doi: 10.1016/0021-9290(90)90358-A
  3. Bland, J.M. and Altman, D.G., Statistical methods for assessing agreement between two methods of clinical measurement, Lancet, 1(8476), 307-310, 1986. doi: 10.1016/S0140-6736(86)90837-8
  4. Cole, G.K., Nigg, B.M., Ronsky, J.L. and Yeadon, M.R., Application of the joint coordinate system to three-dimensional joint attitude and movement representation: A Standardization proposal, Journal of Biomechanical engineering, 115(4A), 344-349, 1993. doi: 10.1115/1.2895496
  5. Fortin, M. and Battie, M.C., Quantitative paraspinal muscle measurements: Inter-software reliability and agreement using OsiriX and ImageJ, Physical Therapy, 92(6), 853-864, 2012. doi: 10.2522/ptj.20110380
  6. Griffiths, I.W., Principles of biomechanics & motion analysis, Philadelphia, Lippincott Williams & Wilkins, 2006.
  7. Hayashi, M. and Hongou, Y., Examination of the reliability of joint angle measurements using Image-J: Errors involving rotation, Rigakuryoho Kagaku, 25(4), 529-532, 2010. doi: 10.1589/rika.25.529
  8. Holden, J.P. and Stanhope, S.J., The effect of knee center location estimates on net knee joint moments, Gait and Posture, 7(1), 1-6, 1998. doi: 10.1016/S0966-6362(97)00026-X
  9. ImageJ Home Page, http://imagej.nih.gov/ij/index.html (retrieved June 19, 2014).
  10. Kim, H.Y., Sakurai, S. and Ahan, J., Errors in measurement of center of pressure (CoP) computed with force plate affect on 3D lower limb joint moment during gait, International Journal of Sport and Health Science, 17, 71-82, 2007. doi: 10.5432/ijshs.5.71
  11. Kulig, K., Harper-Hanigan, K., Souza, R.B. and Powers, C.M., Measurement of femoral torsion by ultrasound and magnetic resonance imaging: Concurrent Validity, Physical Therapy, 90(11), 1641-1648, 2010. doi: 10.2522/ptj.20090391
  12. Lafortune, M.A., Cavanaugh, P.R., Sommer III, H.J. and Kalenak, A., Three-dimensional kinematics of the human knee during walking, Journal of Biomechanics, 25(4), 347-357, 1992. doi: 10.1016/0021-9290(92)90254-X
  13. Ludbrook, J., Statistical techniques for comparing measurers methods of measurement: a critical review. Clinical and Experimental Pharmacology and Physiology, 29(7), 527-536, 2002. doi: 10.1046/j.1440-1681.2002.03686.x
  14. Maeoka, H., Fukumoto, T., Sakaguchi, A. et al., Reliability of a software ImageJ in motion measurement use of sit-to-stand movements, Rigakuryoho Kagaku, 23(4), 529-533, 2008. doi: 10.1589/rika.23.529
  15. Mathematica Home Page, http://www.wolfram.com/mathematica/ (retrieved October 3, 2014).
  16. Nagano, A. and Komura, T., Longer moment arm results in smaller joint moment development, power and work outputs in fast motions, Journal of Biomechanics, 36(11), 1675-1681, 2003. doi: 10.1016/S0021-9290(03)00171-4
  17. Piazza, S.J., Okita, N. and Cavanagh, P.R., Accuracy of the functional method of hip joint center location: effects of limited motion and varied implementation, Journal of Biomechanics, 34(7), 967-973, 2001. doi: 10.1016/S0021-9290(01)00052-5
  18. SAS Home Page, http://www.sas.com/en_us/home.html (retrieved October 3, 2014).
  19. Sisson, L., Croy, T., Saliba, S. and Hertel, J., Comparison of ankle arthrometry to stress ultrasound imaging in the assessment of ankle laxity in healthy adults, International Journal of Sports Physical Therapy, 6(4), 297-305, 2011.
  20. Winter, D.A., Biomechanics and motor control of human movement, 3rd ed, New Jersey. John Wiley and Sons, 2005.
  21. Yu, B., Gabriel, D., Noble, L. and An, K.N., Estimate of the optimum cutoff frequency for the Butterworth low-pass digital filter, Journal of Applied Biomechanics, 13, 318-329, 1999.