• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3C
• /
• pp.271-280
• /
• 2008

M channel near-perfect-reconstruction(NPR) pseudo-QMF banks are a hybrid of conventional pseudo-QMF design and spectral factorization approach where the analysis and synthesis filters are cosine-modulated versions of the prototype-lowpass filter(p-LPF). However, p-LPF H(z) does not have linear-phase symmetry as well as magnitude-distortion optimization since it is obtained by spectral factorization of $2M^{-th}$ band filter $G(z)=z^{-(N-1)}H(z^{-1})H(z)$. A fair amount of attention, therefore, has been focused on the design of filter banks for reducing only alias-cancellation distortion without reconstructed-amplitude distortion. In this paper, we propose a new method for designing linear-phase p-LPF in NPR pseudo-QMF banks, which is based on Maxflat(maximally flat) FIR filters with closed-form transfer function. In addition, p-LPF H(z) is optimized in this approach so that the 2M-channel overall distortion response represented with $G(z)=H^2(z)$ approximately becomes an unit magnitude response. Through several examples of NPR pseudo-QMF banks, it is shown that the peek ripple of the overall magnitude distortion is less than $3.5{\times}10^{-4}\;({\simeq}-70dB)$ and analysis/synthesis filters have the sharp monotone-stopband attenuation exceeding 100 dB.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.12
• /
• pp.1917-1923
• /
• 2010

This study focuses on model identification and a 2-DOF PID control algorithm for cooling processes; a pneumatic butterfly-type control valve is used for this purpose. The mathematical model is a transfer function composed of a time delay and a second-order delay system. The control valve is identified as a first-order delay system with a time delay and included in the controlled plant. From the experimental data sets for a demo plant, the model parameters are identified, and the 2-DOF PID control gains are analytically derived by Kitamori's method. We show via a computer simulation and an experimental test that the performance of the proposed 2-DOF PID control system is better than that of a conventional 1-DOF PID control system.

• Journal of Power Electronics
• /
• v.5 no.2
• /
• pp.129-141
• /
• 2005

A high-performance robust hybrid speed controller for a permanent-magnet synchronous motor (PMSM) drive with an on-line trained neural-network model-following controller (NNMFC) is proposed. The robust hybrid controller is a two-degrees-of-freedom (2DOF) integral plus proportional & rate feedback (I-PD) with neural-network model-following (NNMF) speed controller (2DOF I-PD NNMFC). The robust controller combines the merits of the 2DOF I-PD controller and the NNMF controller to regulate the speed of a PMSM drive. First, a systematic mathematical procedure is derived to calculate the parameters of the synchronous d-q axes PI current controllers and the 2DOF I-PD speed controller according to the required specifications for the PMSM drive system. Then, the resulting closed loop transfer function of the PMSM drive system including the current control loop is used as the reference model. In addition to the 200F I-PD controller, a neural-network model-following controller whose weights are trained on-line is designed to realize high dynamic performance in disturbance rejection and tracking characteristics. According to the model-following error between the outputs of the reference model and the PMSM drive system, the NNMFC generates an adaptive control signal which is added to the 2DOF I-PD speed controller output to attain robust model-following characteristics under different operating conditions regardless of parameter variations and load disturbances. A computer simulation is developed to demonstrate the effectiveness of the proposed 200F I-PD NNMF controller. The results confirm that the proposed 2DOF I-PO NNMF speed controller produces rapid, robust performance and accurate response to the reference model regardless of load disturbances or PMSM parameter variations.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.2
• /
• pp.387-413
• /
• 1998

Image resampling is of particular interest in digital radiology. When resampling an image to a new set of coordinate, there appears blocking artifacts and image changes. To enhance image quality, interpolation algorithms have been used. Resampling is used to increase the number of points in an image to improve its appearance for display. The process of interpolation is fitting a continuous function to the discrete points in the digital image. The purpose of this study was to determine the effects of the seven interpolation functions when image resampling in digital periapical images. The images were obtained by Digora, CDR and scanning of Ektaspeed plus periapical radiograms on the dry skull and human subject. The subjects were exposed to intraoral X-ray machine at 60kVp and 70 kVp with exposure time varying between 0.01 and 0.50 second. To determine which interpolation method would provide the better image, seven functions were compared; (1) nearest neighbor (2) linear (3) non-linear (4) facet model (5) cubic convolution (6) cubic spline (7) gray segment expansion. And resampled images were compared in terms of SNR(Signal to Noise Ratio) and MTF(Modulation Transfer Function) coefficient value. The obtained results were as follows ; 1. The highest SNR value(75.96dB) was obtained with cubic convolution method and the lowest SNR value(72.44dB) was obtained with facet model method among seven interpolation methods. 2. There were significant differences of SNR values among CDR, Digora and film scan(P<0.05). 3. There were significant differences of SNR values between 60kVp and 70kVp in seven interpolation methods. There were significant differences of SNR values between facet model method and those of the other methods at 60kVp(P<0.05), but there were not significant differences of SNR values among seven interpolation methods at 70kVp(P>0.05). 4. There were significant differences of MTF coefficient values between linear interpolation method and the other six interpolation methods (P< 0.05). 5. The speed of computation time was the fastest with nearest -neighbor method and the slowest with non-linear method. 6. The better image was obtained with cubic convolution, cubic spline and gray segment method in ROC analysis. 7. The better sharpness of edge was obtained with gray segment expansion method among seven interpolation methods.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.401-409
• /
• 2021

This study aimed to estimate the photosynthetic capacity of tomato plants grown in a semi-closed greenhouse using temperature response models of plant photosynthesis by calculating the ribulose 1,5-bisphosphate carboxylase/oxygenase maximum carboxylation rate (V_cmax), maximum electron transport rate (J_max), thermal breakdown (high-temperature inhibition), and leaf respiration to predict the optimal conditions of the CO₂-controlled greenhouse, for maximizing the photosynthetic rate. Gas exchange measurements for the A-C_i curve response to CO₂ level with different light intensities {PAR (Photosynthetically Active Radiation) 200µmol·m^-2·s^-1 to 1500µmol·m^-2·s^-1} and leaf temperatures (20℃ to 35℃) were conducted with a portable infrared gas analyzer system. Arrhenius function, net CO₂ assimilation (A_n), thermal breakdown, and daylight leaf respiration (R_d) were also calculated using the modeling equation. Estimated J_max, A_n, Arrhenius function value, and thermal breakdown decreased in response to increased leaf temperature (> 30℃), and the optimum leaf temperature for the estimated J_max was 30℃. The CO₂ saturation point of the fifth leaf from the apical region was reached at 600ppm for 200 and 400µmol·m^-2·s^-1 of PAR, at 800ppm for 600 and 800µmol·m^-2·s^-1 of PAR, at 1000ppm for 1000µmol of PAR, and at 1500ppm for 1200 and 1500µmol·m^-2·s^-1 of PAR levels. The results suggest that the optimal conditions of CO₂ concentration can be determined, using the photosynthetic model equation, to improve the photosynthetic rates of fruit vegetables grown in greenhouses.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.82-82
• /
• 2003

Offspring have been produced from somatic cells in a number of species. This biotechnology introduced a new phenomenon in reprogramming and differentiation of somatic cell, namely totipotency. However, birth of oversized calves and perinatal abnormalities such as increased gestation length, lack of spontaneous parturition, higher incidence of dystocia, and reduced perinatal viability of offspring are frequently observed in pregnancies of cloned bovine fetuses. Disturbance of feto-placenta has been proposed as likely causes for abnomal growth. However. Little is known the mechanism responsible for the perinatal problems. Therefore, we focused on gestation length in somatic cell nuclear recipient cows. To solve this issues, placental tissues of control and cloned bovine were obtained by a cesarean section (C-section) before 5 days of paturition. Total RNA from control and cloned bovine placenta was extractd by TRIzol reagent. GeneFishing DEG kits (Seegene) were used to identify differentially expression genes. Total RNA (3 ug) were synthesized by M-MLV reverse transcriptase (200 u/ul) with 10 uM dT-annealing control primer (ACP1) at 42C for 90 min. Then, first-strand cDNA (50 ng) was amplified using the 5 uM arbitary ACP (1-20) and 10 uM dT-ACP2 primers. Some specific expression genes were amplified, Now, we are cloning and sequencing. These finding strongly can be support to solve the problems for parturition delay in nuclear transfer cows, suggest that placenta specific proteins are key indicators for the aberration of gestation and placental function in cows.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.19-22
• /
• 2002

In this paper, we aims to develop a microcontroll er-based ECG monitoring system and portable pulse oximeter using Compact Flash Interface. First, portable pulse oximeter system is designed to record 2 channel of biosignals simultaneously, including 1 channel of $SpO_2$ and 1 channel of pulse rate. It is very small and portable. Besides, the system makes it possible to measure a patient's condition without an additional medical equipment. We tried to solve the problems generated by a patient's motion. That is, we added an analog circuit to a traditional pulse oximeter in order to eliminate the change of the base line. And we used 2D sector algorithm. As present, SpO2 modules are completed. But there are still many further development needed in order to enhance the function. Especially, compact falsh interface remains the most to complete. Second, ECG monitoring system uses almost same as present 3-lead ECG system. But we focus on the analog part, especially in filter. The proposed filter is composed of two parts. One is a filter to remove the power-line interface. The other is a filter to remove the baseline drift. A filter to remove the power-line and the baseline drift is necessarily used in the ECG system. The implemented filter have three features; minimizing the distortion in DC component, removing the harmonic component of power-line frequency. Using compact flash interface, we can easily transfer a patient's personal information and the measured signal data to a network based server environment. That means, it is possible to implement a patient's monitoring system with low cost.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.7-19
• /
• 2010

Users of metropolitan railroad is increased continuously because of its various advantage such as comfortableness, convenience and punctuality. Thus, several local government including Seoul considered new installation or extension of railroads and four railroad operators maintain seventeen lines at present. After public transportation reforms in 2004 and integrated discount fare system in 2007, public transportation become more convenient in many aspects. However, these trials gives much more complex allocating problems of revenues among public transportation operators. In this paper, we deal with revenue allocating problems among public transportation operators after integrated discount fare system in 2007. Specifically, this study focuses on allocating revenues to metropolitan railroad operators by using RF card data. This research roughly proposes the methodology of O/D extraction from RF card data, generalized cost estimation and allocating revenue algorithm. We use RF card data in order to draw out exact individual O/D data and try to compare our results with those of Korea Smart Card Company. In generalized cost estimation, survey study about transfer factors is conducted for accurate estimation of generalized cost function. Lastly, new allocating revenue algorithm using k-path and non-dominated path concept is suggested. It is expected that case study is also performed with real revenues and O/D data in order to check up the application. Preposed methodology in this research can contribute to solve present and future revenue allocating issues according to the introduction of LRT and private railroad.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.193-199
• /
• 2019

In this paper, the results of underwater vibration experiment are analyzed to verify platform vibration-induced noise isolation characteristics of a hull-mounted acoustic sensor. The experimental condition causing platform vibration-induced noise is generated using the mock-up hull, where the acoustic sensor is installed, with shaker in an acoustic water tank. The performance indices of ATF (Acceleration Transfer Function), AVS (Acceleration Voltage Sensitivity), and IL (Insertion Loss) for the acoustic sensor are calculated from the output of the standard accelerometers, which are installed on the mock-up hull and the acoustic sensor, and the output signal of the acoustic sensor. The frequency-dependent noise isolation characteristics of the acoustic sensor are analyzed based on the calculated performance indices and an effectiveness of the experiment is examined.

• Journal of Life Science
• /
• v.17 no.7 s.87
• /
• pp.905-909
• /
• 2007

The dual-function protein redox factor-1 (Ref-1) is essential for base excision repair of oxidatively damaged DNA and also governs the activation of many redox-sensitive transcription factors. We examined the role of Ref-1 in regulation of nitric oxide (NO) synthesis employing adenoviral-mediatedoverexpression of Ref-1 in bradykinin-stimulated endothelial cells. Intracellular NO was detected with the NO-sensitive fluorophore DAF-2. Overexpression of Ref-1 potentiates bradykinin-stimulated NO production in endothelial cells. And, cells ifected with AdRef-1 showed higher fluorescence intensity compared with uninfected or AdD1312-infected cells. In parallel with this, over expression of Ref-1 also stimulated endothelial NO synthase (eNOS) enzyme activity, compared with unifected or AdD1312-infected cells, in bradykinin-stimulated cells as well as in unstimulated cells. These results suggest that Ref-1 implicates in endothelium-dependent vasorelaxation resulting from NO production in vascular system.