• 제목/요약/키워드: 2D Offset

검색결과 529건 처리시간 0.024초

자체보정 벡터 발생기를 이용한 7-bit 2GSPS A/D Converter의 설계 (Design of a 7-bit 2GSPS Folding/Interpolation A/D Converter with a Self-Calibrated Vector Generator)

  • 김승훈;김대윤;송민규
    • 대한전자공학회논문지SD
    • /
    • 제48권4호
    • /
    • pp.14-23
    • /
    • 2011
  • 본 논문에서는 자체보정 벡터 발생기(Self-Calibrated Vector Generator)를 이용한 7-bit 2GSPS folding/interpolation A/D Converter (ADC)를 제안한다. 제안하는 ADC는 2GSPS 의 고속 변환에 적합한 상위 2-bit, 하위 5-bit 인 분할구조로 설계 되었으며, 각각의 folding/interpolation rate는 4와 8로 설정되었다. 최대 1GHz의 높은 입력신호를 처리하기 위해 cascade 구조의 preprocessing block을 적용하였으며, 전압 구동 방식 interpolation 기법을 적용하여 기준전압 생성 시 발생하는 추가적인 전력소모를 최소화하였다. 또한, 새로운 개념의 자체보정 벡터 발생기를 이용하여 device mismatch, 기생 저항 및 커패시턴스 등에 의한 offset error를 최소화하였다. 제안하는 ADC는 1.2V 0.13um 1-poly 7-metal CMOS 공정을 사용하여 설계 되었으며 calibration 회로를 포함한 유효 칩 면적은 2.5$mm^2$ 이다. 측정 결과 입력 주파수 9MHz, sampling 주파수 2GHz에서 39.49dB의 SNDR 특성을 보이며, calibration 회로의 작동결과 약 3dB 정도의 SNDR의 상승을 확인하였다.

Stress intensity factors for an interface crack between an epoxy and aluminium composite plate

  • Itou, S.
    • Structural Engineering and Mechanics
    • /
    • 제26권1호
    • /
    • pp.99-109
    • /
    • 2007
  • A cracked composite specimen, comprised of an epoxy and an aluminium plate, was fractured under a tensile load. In this paper, two crack configurations were investigated. The first was an artificial center crack positioned in the epoxy plate parallel to the material interface. The other was for two edge cracks in the epoxy plate, again, parallel to the interface. A tensile test was carried out by gradually increasing the applied load and it was verified that the cracks always moved suddenly in an outward direction from the interface. The d/a ratio was gradually reduced to zero, and it was confirmed that the maximum stress intensity factor value for the artificial center crack, $K_{{\theta}{\theta}}^{max}$, approached that of an artificial interface crack,$K_{{\theta}{\theta}}^{ifc\;max}$ (where: 2a is the crack length and d is the offset between the crack and interface). The same phenomenon was also verified for the edge cracks. Specifically, when the offset, d, was reduced to zero, the maximum stress intensity factor value, $K_{{\theta}{\theta}}^{max}$, approached that of an artificial interface edge crack.

직류 오프셋 제거 기능을 가진 저 전력 PGA 설계 (Design of Low-Power Programmable Gain Amplifier with DC-offset Cancellation)

  • 김철환;성명우;최성규;최근호;김신곤;한기정;;류지열;노석호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2014년도 추계학술대회
    • /
    • pp.299-301
    • /
    • 2014
  • 본 논문에서는 직류 오프셋 (DC-offset) 제거 기능을 가진 저 전력 자동 이득 조절 증폭기 (PGA, Programmable Gain Amplifier)를 제안한다. 이러한 회로는 직류 오프셋 문제점을 해결하기 위해 기존의 gm-boosting 증폭기를 변형한 디지털 이득 제어 방식으로 설계되어 있기 때문에 우수한 선형성을 가진다. 또한 특수 목적에 맞도록 그 이득을 6dB에서 60dB까지 7단계로 조절 가능하며, 밀러효과를 이용한 AC-coupling 방식으로 큰 값의 유동적인 커패시터와 저항을 구현하여 직류 오프셋을 제거한다. 제안한 PGA는 기존 회로에 비해 0.2dB 보다 작은 이득오차와 0.47mW의 낮은 소비전력 특성을 보였다.

  • PDF

부고조파를 이용한 X-band 주입 동기 발진기 설계 및 제작 (Design of Subharmonic Injection Locked Oscillator)

  • 전영상;이문규;남상욱
    • 한국전자파학회논문지
    • /
    • 제10권5호
    • /
    • pp.653-662
    • /
    • 1999
  • 본 논문에서는 부고조파를 이용한 주입 동기 발진기를 설계, 제작하였다. 발진기는 Two Signal Method ( (TSM)의 방법을 사용하여 직렬 궤환회로로 설계하였다. 발진기의 발진주파수 9.4 GHz에서 출력전력 6dBm으 로 free-running하고 었고, 입력선호가 들어가연 주파수가 체배되어 locking되었다. 이때 원하는 출력 파형의 크 기는 다른 부고조파 신호에 비해 최소 40dB 이상이며, 2차 부고조파를 이용한 경우 locking range는 최대 220 MHz 정도이고,4차 부고조파를 이용한 경우 10 MHz이었다 이때의 위상잡음은 각각 100 KHz offset에서 -111dBe/Hz, - 104 dBelHz 정도의 특성을 나타내었다.

  • PDF

The Tripler Differential MMIC Voltage Controlled Oscillator Using an InGaP/GaAs HBT Process for Ku-band Application

  • Yoo Hee-Yong;Lee Rok-Hee;Shrestha Bhanu;Kennedy Gary P.;Park Chan-Hyeong;Kim Nam-Young
    • Journal of electromagnetic engineering and science
    • /
    • 제6권2호
    • /
    • pp.92-97
    • /
    • 2006
  • In this paper, a fully integrated Ku-band tripler differential MMIC voltage controlled oscillator(VCO), which consists of a differential VCO core and two triplers, is developed using high linearity InGaP/GaAs HBT technology. The VCO core generates an oscillation frequency of 3.583 GHz, an output power of 3.65 dBm, and a phase noise of -96.7 dBc/Hz at 100 kHz offset with a current consumption of 30 mA at a supply voltage of 2.9 V. The tripler shows excellent side band rejection of 23 dBc at 3 V and 12 mA. The tripler differential MMIC VCO produces an oscillation frequency of 10.75 GHz, an output power of -13 dBm and a phase noise of -89.35 dBc/Hz at 100 kHz offset.

W-band 소형 레이다용 파형발생부 (Waveform Generator for W-band Compact Radar)

  • 이만희;안세환;김영곤;김홍락
    • 한국인터넷방송통신학회논문지
    • /
    • 제18권5호
    • /
    • pp.97-102
    • /
    • 2018
  • 본 논문에서는 W-대역 소형 레이다용 파형발생부를 설계 및 제작하였다. 제작된 파형발생부는 DDS를 적용하여 CW 및 FMCW 등 시스템에서 요구되는 다양한 파형을 고속으로 정밀하게 생성한다. 시스템 자체 점검으로 거리 지연 및 거리 추적 시험 시 별도의 점검장비 없이 레이다 자체만으로 시험이 가능하도록 LO 경로를 두 개로 설계하여 스위치를 통해 선택 가능하도록 구현하였다. 제안된 파형발생부는 대역폭 125 MHz, 위상잡음 1 kHz 오프셋(offset)에서 -91 dBc/Hz, 불요파 -63.2 dBc가 측정되었다. 본 논문에서 제시한 파형발생부를 이용하여 W-대역 소형 레이다용 송수신모듈에 바로 적용이 가능할 것으로 예상한다.

세라믹 적층 기술을 이용한 초소형 VCO (A Miniaturized VCO Using Multi-layer Ceramic Technology)

  • 고윤수;홍성용;배홍열;김기수;송호원
    • 한국전자파학회논문지
    • /
    • 제10권1호
    • /
    • pp.70-77
    • /
    • 1999
  • 세라믹 적층기술을 이용하여 PCS 주파수 대역의 초소형 vco를 설계하고 제작하였다. 위상잡음 특성을 개선하고 크기를 줄이기 위하여 품칠계수(quality factor)가 우수한 세라믹 다층기판으로 스트립라인을 구현 하여 vco 공진부의 인덕터로 사용하였다 1.720 -1.780 MHz에서 동작하도록 제작된 vco는 $6mm\times6mm\times2mm$의 크기로 초소형이며, 3.3 V, 9 mA의 바이어스 조건에서 - 3.7 dBm의 출력을 얻었고, 위상잡음 특성 은 10 KHz offset에서 95 dBe/Hz였다 본 논문에서 제작된 세라믹 VCo는 기존의 에폭시 수지(FR4) 기판을 사용한 VCo보다 약 5 dBe/Hz 개선된 위상잡음(C/N) 특성을 얻었다.

  • PDF

Metamaterial 구조의 대역통과여파기를 이용한 WCDMA 대역 고선형 전력증폭기 설계 (Design of Highly Linear Power Amplifier using Bandpass Filter based on Metamaterial Structure)

  • 김형준;서철헌
    • 대한전자공학회논문지TC
    • /
    • 제49권1호
    • /
    • pp.68-72
    • /
    • 2012
  • 본 논문에서는 Composite Right-/Left-Handed (CRLH) 형태의 Metamaterial 구조의 대역통과여파기를 설계하여 이를 전력증폭기의 출력 정합단에 이용함으로써 고선형 전력증폭기를 구현하였다. 제안된 대역통과여파기는 직렬형태의 캐패시터와 전송선로, 병렬형태의 인덕터와 전송선로로 이루어져 있다. 전력증폭기의 동작대역에서 손실을 최소화하고 CRLH 구조를 이용하여 2차 고조파 성분을 제한시켜 전력증폭기의 선형성을 개선하였다. 또한 협대역 대역통과여파기의 특성을 이용하여 인접채널 누수비 특성 또한 개선하였다. 제안된 전력증폭기는 각각 출력 전력과 2차 고조파, 3차 혼변조, 인접채널 전력누수비는 각각 2.14 GHz에서 38.83 dBm, -61.33 dBc, -54.67 dBc, -51.33 dBc @ 5 MHz, -56.50 dBc @ 10 MHz 의 특성을 얻었다.

Dual Loop Optoelectronic Oscillator with Acousto-Optic Delay Line

  • Kim, Tae Hyun;Lee, Sangkyung;Lee, Chang Hwa;Yim, Sin Hyuk
    • Journal of the Optical Society of Korea
    • /
    • 제20권2호
    • /
    • pp.300-304
    • /
    • 2016
  • A dual loop optoelectronic oscillator (OEO) based on an acousto-optic modulator (AOM) for single mode operation with an acousto-optic delay line is demonstrated in this paper. When the OEO operates, the free spectral range is a function of the total loop length of the OEO, which is mainly dependent on the propagation time of the acoustic wave in the AOM. Due to the huge difference in the magnitude between the speed of light and the acoustic velocity in the AOM, the effective loop length converted to light-propagation length of the OEO increases to 3.8 km. With 150 MHz oscillation frequency, phase noise of -118 dBc/Hz at 10 kHz frequency offset, and -140 dBc/Hz at 200 kHz frequency offset, is achieved.

고온초전도체와 유전체 삽입 공동 공진기를 이용한 발진기의 위상잡음 개선에 관한 연구 (A Study on the Phase Noise Improvement of Oscillator using Dielectric-rod loaded Cavity Resonators with HIS End-plates)

  • 이원희
    • 한국전기전자재료학회논문지
    • /
    • 제22권2호
    • /
    • pp.174-177
    • /
    • 2009
  • In this paper, an oscillator using dielectric-rod loaded cavity resonators with HTS(High Temperature Superconductor) end-plates was presented. It was operated at X-band. A two port cavity resonator was incorporated into a basic feedback loop oscillator configuration. A rutile loaded cavity resonator with HTS thin film end-plates was used to provide the quality factor between $10^4$ and $10^6$. A parallel feedback oscillator was constructed with a dielectric loaded cavity resonator, an amplifier, and a directional coupler. At 300 K, the experimental results showed the phase noise of -108 dBc/Hz at a 100 kHz offset frequency. At 26 K, the results was -118.8 dBc/Hz at same offset frequency.