• Title/Summary/Keyword: 2D Elastic Membrane

Search Result 6, Processing Time 0.021 seconds

A Novel Stiff Membrane Seesaw Type RF Microelectromechanical System DC Contact Switch on Quartz Substrate

  • Khaira, Navjot K.;Singh, Tejinder;Sengar, Jitendra S.
    • Transactions on Electrical and Electronic Materials
    • /
    • v.14 no.3
    • /
    • pp.116-120
    • /
    • 2013
  • This paper proposes a novel RF MEMS dc-contact switch with stiff membrane on a quartz substrate. The uniqueness of this work lies in the utilization of a seesaw mechanism to restore the movable part to its rest position. The switching action is done by using separate pull-down and pull-up electrodes, and hence operation of the switch does not rely on the elastic recovery force of the membrane. One of the main problems faced by electrostatically actuated MEMS switches is the high operational voltages, which results from bending of the membrane, due to internal stress gradient. This is resolved by using a stiff and thick membrane. This membrane consists of flexible meanders, for easy movement between the two states. The device operates with an actuation voltage of 6.43 V, an insertion loss of -0.047 dB and isolation of -51.82 dB at 2 GHz.

Elastic-Plastic Finite Element Analysis of 2-D Stretch Forming by Using the Selective M/S-Elements (선택적 M/S요소를 이용한 2차원 스트레칭 공정의 탄소성 유한요소해석)

  • 양동열;정상보;송인섭;심현보;이항수
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.15 no.5
    • /
    • pp.1601-1610
    • /
    • 1991
  • 본 연구에서는 3차원 스트레칭 문제의 2차원화가 가능한 주요 단면에 대해서 박막요소와 적층 셸(degenerated shell) 요소를 혼합하여 사용하는 선택적 M/S 방법을 이용하여 2차원 문제로 해석하였다. M/S변환 조건으로는 변형형상의 기하학적 조건 을 고려하였다.

Preventive Effect of $\beta$-Glucan on the Experimental Atherosclerosis in Rats (랫트의 실험적 동맥경화증에 대한 $\beta$-Glucan의 예방 효과)

  • 정의배;이영순
    • Journal of Food Hygiene and Safety
    • /
    • v.1 no.1
    • /
    • pp.1-12
    • /
    • 1986
  • The present studies were undertaken in attempt to investigate the preventive effect of $\beta$-glucan from barley ad diltiazem on cholesterol and vitamin D2 induced-atherosclerotic rat. The results obtained were summerized as follows. 1.The group, fed only the mixture of cholesterol and vitamin D2, showed significant increase of calcium, inorganic phosphorus, total cholesterol, lipid LDL-cholesterol and phospholipid in serum, and total lipid in the liver (p<0.05) as comparing with normal group. The aorta showed severe damage of disorganization, necrosis and lipid deposition in the elastic membrane. 2. The group fed mixture of cholesterol and vitamin D2 plus diltiazem simultaneously, showed significant increase of total cholesterol, total lipid and phospholipid in serum, and total lipid and triglyceride n the liver (p<0.05) as comparing with normal group, but the significant decrease of calcium and inorganic phosphorus in serum(p<0.05) as comparing with the atherogenic control group. The aorta showed slight damage of elastic membrane and lipid deposition as comparing with the atherogenic control group. 3.The group, fed mixture of cholesterol and vitamin D2 puls $\beta$-glucan simultaneously, showed significant decrease of total cholesterol, LDL and VLDL-cholesterol, total lipid, phospholipid and triglyceride in serum, and total lipid in the liver as comparing with the atherogenic control group(p<0.05), but the significant increase of calcium in serum as comparing with the normal group(p<0.05). The aorta showed no changes in elastic fiber and no lipid deposition in comparing with the atherogenic control group.

  • PDF

A theoretical approach in 2d-space with applications of the periodic wave solutions in the elastic body

  • Ramady, Ahmed;Mahmoud, S.R.;Atia, H.A.
    • Membrane and Water Treatment
    • /
    • v.11 no.4
    • /
    • pp.295-302
    • /
    • 2020
  • In this paper, theoretical approach with applications of the periodic wave solutions in an elastic material is applied by study the effect of initial stress, and rotation, on the radial displacement and the corresponding stresses in non-homogeneous orthotropic material. An Analytical solution for the elastodynamic equation has obtained concerning the component of displacement. The variations of stresses and displacements have shown graphically. Comparisons with previously published results in the absence of initial stress, rotation and non-homogeneity have made. Finally, numerical results have given and illustrated graphically for each case considered.

Lateral-torsional buckling of prismatic and tapered thin-walled open beams: assessing the influence of pre-buckling deflections

  • Andrade, A.;Camotim, D.
    • Steel and Composite Structures
    • /
    • v.4 no.4
    • /
    • pp.281-301
    • /
    • 2004
  • The paper begins by presenting a unified variational approach to the lateral-torsional buckling (LTB) analysis of doubly symmetric prismatic and tapered thin-walled beams with open cross-sections, which accounts for the influence of the pre-buckling deflections. This approach (i) extends the kinematical assumptions usually adopted for prismatic beams, (ii) consistently uses shell membrane theory in general coordinates and (iii) adopts Trefftz's criterion to perform the bifurcation analysis. The proposed formulation is then applied to investigate the influence of the pre-buckling deflections on the LTB behaviour of prismatic and web-tapered I-section simply supported beams and cantilevers. After establishing an interesting analytical result, valid for prismatic members with shear centre loading, several elastic critical moments/loads are presented, discussed and, when possible, also compared with values reported in the literature. These numerical results, which are obtained by means of the Rayleigh-Ritz method, (i) highlight the qualitative differences existing between the LTB behaviours of simply supported beams and cantilevers and (ii) illustrate how the influence of the pre-buckling deflections on LTB is affected by a number of factors, namely ($ii_1$) the minor-to-major inertia ratio, ($ii_2$) the beam length, ($ii_3$) the location of the load point of application and ($ii_4$) the bending moment diagram shape.

Development of a Tensile Cell Stimulator to Study the Effects of Uniaxial Tensile Stress on Osteogenic Differentiation of Bone Marrow Mesenchymal Stem Cells (세포 인장 자극기의 개발과 세포 인장 자극을 통한 성체 줄기세포의 골분화 유도)

  • Shin, Hyun-Jun;Lee, Woo-Teak;Park, Suk-Hoon;Lee, Sun-Hwa;Park, Jung-Ho;Yoon, Yong-San;Shin, Jennifer H.
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.33 no.7
    • /
    • pp.629-636
    • /
    • 2009
  • Mechanical stimulation is known to play a vital role on the differentiation of mesenchymal stem cells (MSCs) to pre-osteoblasts. In this research, we developed a tensile cell stimulator, composed of a DC motor-driven actuator and LVDT sensor for measuring linear displacement, to study the effects of tensile stress on osteogenic differentiation of MSCs. First, we demonstrated the reliability of this device by showing the uniform strain field in the silicon substrate. Secondly, we investigated the effects of tensile stretching on osteogenic differentiation. We imposed a pre-set cyclic strain at a fixed frequency on cell monolayer cultured on a flexible silicon substrate while varying its amplitude and duration. 60 min of resting period was allowed between 30 min of cyclic stretching and this cycle is repeated up to 7 days. Under the combined stimulation with osteogenic media and mechanical stretching, the osteogenic markers such as alkaline phosphatase (ALP), osterix, and osteopontin began to get expressed as early as 4 days of stimulation, which is much shorter than what is typically required for osteogenic media induced differentiation. Moreover, different markers were induced at different magnitudes of the applied strains. Lastly, for the case of ALP, we observed the antagonistic effects of osteogenic media when combined with mechanical stretching.