• Transactions of Materials Processing
• /
• v.21 no.3
• /
• pp.186-194
• /
• 2012

Hot stamping is a forming method that offers various advantages such as superior mechanical properties, good formability, and very small springback. However, relatively large-sized parts, such as front pillars, exhibit poor formability when hot stamped due to the limited material flow and thickness reduction imparted by the process. This reduction in thickness can also lead to cracks. One of the reasons is the relatively high friction between the sheet and the die. In this study, in order to obtain the optimal conditions for hot stamping of front pillars, various process parameters were studied and analyzed using the sheet forming software, J-STAMP. The effects of various parameters such as the die structure, blank shape, blank holding force, punch speed, clearance(upper and lower dies) and distance block were analyzed and compared.

• Laser Solutions
• /
• v.15 no.1
• /
• pp.1-5
• /
• 2012

Recently ultra high strength steels(UHSS) has been widely applied to the structural or safety components in the automotive industry. Specially, hot stamping boron steel 22MnB5 has shown the crash-resistant characteristics when applying to bumpers and pillars. Lap joint Laser welding of the hot stamped and die quenched sheets of Boron steel was carried out using 3kW Nd/YAG laser. The appropriate Lap joint laser welding conditions were founded separately for four lap joint combinations. The lower sheest is a hot stamped sheet in common and the upper sheet is selected among the hot stamped steel and high strength steels such as SPCC, 370MPa, and 590MPa grade high strength steels. Cross bead sections and local hardening and softening were observed as well as tensile-shear test results.

• Transactions of Materials Processing
• /
• v.20 no.8
• /
• pp.568-574
• /
• 2011

The combination of tailor welded blank (TWB) and hot stamping often offers improved crash-worthiness and reduced mass of stamped parts in the automobile body. To investigate the formability of laser TWB and the reliability of weld line, the present study used 22MnB5 boron steel sheet of the same thickness and used the Erichsen cupping test at elevated temperatures. The effects of laser direction, die temperature, weld line positions and forming speed on formability(the limiting dome height) were studied and the results were compared with the formability of the base material.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.198-203
• /
• 2013

PURPOSE. The purpose of this study was to investigate the effect of resin cements and primer on the retentive force of zirconia copings bonded to zirconia abutments with insufficient retention. MATERIALS AND METHODS. Zirconia blocks (Lava, 3M ESPE, St. Paul, MN, USA) were obtained and forty sets of zirconia abutments and copings were fabricated using CAD/CAM technology. They were grouped into 4 categories as follows, depending on the types of resin cements used, and whether the primer is applied or not:Panavia F2.0 (P), Panavia F2.0 using Primer (PRIME Plus, Bisco Inc, Schaumburg, IL, USA) (PZ), Superbond C&B (S), and Superbond C&B using Primer (SZ). For each of the groups, the cementation was conducted. The specimens were kept in sterilized water ($37^{\circ}C$) for 24 hours. Retentive forces were tested and measured, and a statistical analysis was carried out. The nature of failure was recorded. RESULTS. The means and standard deviations of retentive force in Newton for each group were $265.15{\pm}35.04$ N (P), $318.21{\pm}22.24$ N (PZ), $445.13{\pm}78.54$ N (S) and $508.21{\pm}79.48$ N (SZ). Superbond C&B groups (S & SZ) showed significantly higher retentive force than Panavia F2.0 groups (P & PZ). In Panavia F2.0 groups, the use of primer was found to contribute to the increase of retentive force. On the other hand, in Superbond C&B groups, the use of primer did not influence the retention forces. Adhesive failure was observed in all groups. CONCLUSION. This study suggests that cementation of the zirconia abutments and zirconia copings with Superbond C&B have a higher retentive force than Panavia F2.0. When using Panavia F2.0, the use of primer increases the retentive force.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.3
• /
• pp.348-355
• /
• 2000

The study was conducted to determine physicochemical parameters in various physical fractions (linter, hull, kernel, oil and meal) of cottonseed of different varieties (MNH 147, CIM 240, NIAB 78, FH 87, CIM 109, MNH 93, FH 682, GOHAR 87, SLS 1 and B 557). Average components of linter, hull, and kernel in different varieties of cotton were 12.21, 28.24 and 70.42%, respectively. Average percentage of meal and oil was 48.97 and 22.09% in seed, and 69.28 and 30.72% in kernel, respectively. Maximum percentage of meal was recovered from variety CIM 240 and lowest in variety CIM 109. Statistical analysls revealed variety differences (p<0.05) in seed and it's components. Average contents of crude protein, crude fiber and ash was 22.31, 17.74 and 4.27% in seed, 2.85, 56.50 and 2.61% in hull; 32.62, 3.45 and 4.01 % in kernel; 47.15, 5.00 and 5.78% in meal, respectively. Average contents of Ca, p, Mg, K, Na and Cl were 0.09, 0.22, 0.26, 0.65, 0.009 and 0.035% in seed; 0.12, 0.07, 0.09, 0.51, 0.020 and 0.034% in hull and 0.16, 0.59, 0.32, 1.01, 0.03 and 0.07% in meal of different varieties of cotton, respectively. Fe, Zn, Cu and Mn were 141.35, 24.55, 186.50 and 27.12 mg/kg in seed; 158.48, 2.06, 74.60, and 22.17 mg/kg in hulls; and 167.62, 20.30, 185.83 and 20.67 mg/kg in meal, respectively. Significant varietal differences were observed in proximate composition and mineral contents of cottonseeds and derived products. Cottonseeds and their products of varieties FH 87, CIM 109 and MNH 93 showed higher nutrient density while lower was observed in varieties CIM 240, SLS I and FH 682.

• Laser Solutions
• /
• v.13 no.4
• /
• pp.1-6
• /
• 2010

Recently the use of ultra high strength steels (UHSS) in structural and safety component is rapidly increasing in the automotive industry. For example, 1.5GPa grade hot stamping with die-quenching of boron steel 22MnB5 could apply crash-resistant parts such as bumpers and pillars. The development of laser welding process of hot stamping steels, fundamental bead-on-plate welding and lap joint welding test were carried out using 3kW Nd:YAG laser. Local hardening & HAZ softening occurred in hot stamping steel as a result of metallurgical change caused by the welding heat input in the Nd:YAG laser welding process. The size of soft zones in the hot stamping steel was related to the welding heat input, being smaller at high speeds which generated a smaller heat input. Also in the case of lap joint design structure, same welded characteristics were shown. The HAZ softening degree was controlled to ensure the joint strength.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.211-218
• /
• 2006

This experiment was conducted to study the effects of the natural deep sea water, which contained approximately 2.3% salt, and various minerals of K, Mg, Ca, Na, Fe, Mn, Zn, Cu etc, on the immune response and antioxidant activity in rats. 24 Sprague Dawley rats were randomly allotted to a control group and 3 treatment groups. Control rats were supplied with filtered tap water, and each treatment group rats were supplied with 0.5% deep sea water, 1% deep sea water and Jijangsoo, respectively, which is upper clear water separated from sediment by the clay. Feed and water were provided ad libitum throughout the experiment that lasted for 4 weeks. The results showed that 1% deep sea water group showed the highest values in weight gain, feed intake, and feed efficiency than those of other groups. The levels of water intake of 1%- and 0.5%-deep sea water, and Jijangsoo group were 49.1%, 22.8%, and 40.5% higher than that of control group, respectively. The Jijangsoo group rats showed that perirenal and epididymal adipose tissue weights were decreased by 32% and 25%(p<0.05), respectively, when compared to control group rats. There were no remarkable differences of serum glucose concentration among all experimental groups. However, insulin concentration of experimental groups were remarkably increased in order of Jijangsoo (4.54), 1% deep sea water (3.70), 0.5% deep sea water (3.25)(p<0.05). B cell and T cell stimulation were increased about 44.7% and 207%, respectively, by 0.5% deep sea water in comparison with control (p<0.05). TBARS values of 0.5 % deep sea water group were significantly lower than that of control(p<0.05). Catalase and SOD activities of 0.5 % deep sea water group were 200% and 47% higher than that of control, respectively. From the results, it can be concluded that the supply of natural deep sea water can slightly improve the physiological activity which modulates immune response and antioxidant activity in rats.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.613-625
• /
• 1995

The purpose of this study was to investigate the degree of relapse following orthognathic surgery and the relationship between preoperative state and the methods of orthognathic surgery in skeletal Class III patients. Thirty-one patients were selected(17 men, and 14 women) for this study, who had received orthognathic surgery(20 one jaw surgery, and 11 two jaw surgery). The mean age was 22.5 years. Their lateral cephalograms, that were taken preoperatively, immediate postoperatively and follow-up over one year, were traced and analysed. The results were as follows : 1. In two jaw surgery, mandibular length, lower facial height and lower lip length were 4.24mm, 4.64mm and 4.13mm longer than in one jaw surgery, respectively But in two jaw surgery, overjet was 3.13mm shorter than in one jaw surgery. 2. In one jaw surgery, mandible was moved back $8.95\pm4.45mm$ at B point. In two jaw surgery, maxilla was moved forward $5.15\pm3.46mm$ and mandible was moved back $7.24\pm9.11mm$ at B point. 3. Between postoperation and follow-up over one year, A point, A' point, Pn and Sn were moved backward 1.02 $\pm$ 2.14mm, $1.73\pm1.63mm,\;1.05\pm1.48mm\;and\;1.55\pm1.37mm$ in two jaw surgery, respectively. 4. Between postoperation and follow-up over one year, in one jaw surgery, B point was moved forward $2.58\pm4.22mm$ and B' point was moved forward $1.95\pm4.39mm$. In two jaw surgery, B point was moved forward $0.65\pm2.88mm$ and B' point was moved forward $0.19\pm3.32mm$. In one jaw surgery, relapse rate was $28\%$ at B point and $24\%$ at B' point, whereas in two jaw surgery, relapse rate was $8\%$ at B point and $3\%$ at B' point.

• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.359-367
• /
• 1999

CsI(Li) single crystals doped with 0.02, 0.1, 0.2 and 0.3 mole% lithium as an activator were grown by Czochralski method. The lattice structure of grown CsI(Li) single crystal was bcc, its lattice constant was $4.568\;{\AA}$. The absorption edge of CsI(Li) single crystal was 245 nm, and the spectral range of luminescence was $300{\sim}600\;nm$, its maximum luminescence intensity appeared at 425 nm. The energy resolutions of CsI(Li) single crystal doped with 0.2 mole% lithium were 14.5% for $^{137}Cs$(662 keV), 11.4% for $^{54}Mn$(835 keV) and 17.7% and 7.9% for $^{22}Na$(511 keV and 1275 keV), respectively. The relation formula of $\gamma$-ray energy versus energy resolution was ln (FWHM%) = -0.893lnE + 8.456 and energy calibration formula was ${\log}E_r=1.455\;{\log}(ch.)-1.277$. The phosphorescence decay time of CsI(Li) crystal doped with 0.2 mole% lithium was 0.51 s at room temperature, and its time resolution measured by CFT(constant-fraction timing method) was 9.0 ns.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.5
• /
• pp.518-523
• /
• 2007

Purpose: The purpose of this study is to prove that orthognatic surgery on asymmetric prognathism patients improve the temporomandibular dysfunction. Materials and methods: All 30 patients underwent mandibular setback with B-SSRO including 22 patients Le Fort I surgery in KyungHee medical center. Preoperative and postoperative PA cephalograms & transcranial radiographs were measured midline deviation in Mx and Mn, occlusal canting change, condyle position, the temporomandibular dysfunction were checked before surgery, within 1 month after surgery, $3{\sim}6$ months, 12-24 months after surgery respectively. Results: The temporomandibular dysfunction were relieved after surgery in 17 patients of 25 patients. Conclusion: Orthognatic surgery may benefit the temporomandibular joint dysfunction in facial asymmetry patients by obtaining a postoperative stable occlusion and better physiologic neuromuscular function. Specially impovement of occlusal canting may reduce condyle displacement of midline deviation side and the temporomandibular joint dysfunction.