Laser Solutions (한국레이저가공학회지)
- Volume 15 Issue 1
- /
- Pages.1-5
- /
- 2012
- /
- 1229-0963(pISSN)
Lap joint Laser Welding of Hot Stamped Ultra High Strength Steel for Automotive Application
자동차용 핫스탬핑 고강도강 판재의 겹치기 레이저용접
-
Kim, Yong
(Institute for Advanced Engineering)
;
-
Park, Ki-Young
(Institute for Advanced Engineering)
;
-
Lee, Kyoung-Don
(Institute for Advanced Engineering)
- Received : 2012.02.20
- Accepted : 2012.03.12
- Published : 2012.03.31
Abstract
Recently ultra high strength steels(UHSS) has been widely applied to the structural or safety components in the automotive industry. Specially, hot stamping boron steel 22MnB5 has shown the crash-resistant characteristics when applying to bumpers and pillars. Lap joint Laser welding of the hot stamped and die quenched sheets of Boron steel was carried out using 3kW Nd/YAG laser. The appropriate Lap joint laser welding conditions were founded separately for four lap joint combinations. The lower sheest is a hot stamped sheet in common and the upper sheet is selected among the hot stamped steel and high strength steels such as SPCC, 370MPa, and 590MPa grade high strength steels. Cross bead sections and local hardening and softening were observed as well as tensile-shear test results.
Keywords