• Tunnel and Underground Space
• /
• v.19 no.4
• /
• pp.287-303
• /
• 2009

Rock mass in Baekrokdam at the summit of Hallasan in Jeju island is composed of two volcanic rock types: Baekrokdam trachybasalt at the eastern region and Hallasan trachyte at the western region. On-going rockfall and subsequent collapse of Baekrokdam wall rock are closely linked to the weathering of trachyte distributed in the western region of Baekrokdam. Samples of Hallasan trachyte showing different weathering grades had been collected and the polarizing microscopic observation, X-ray diffraction analysis and analysis for chemical weathering had been conducted. Formation of secondary minerals, especially clay minerals, by chemical weathering has not been identified, but the change of chemical weathering indices indicated that chemical weathering process had been proceeded to the degree for increasing and decreasing the contents of some chemical components. Changes in physical and mechanical rock properties due to weathering has also been examined. Artificial weathering test of freezing-thawing reveals that the process of crack initiation and propagation deteriorated the mechanical characteristics of Hallasan trachyte and $D_B$ = 1.5 or porosity = $20{\sim}21%$ would be the ultimate limiting value induced by the mechanical weathering processes.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.10
• /
• pp.563-572
• /
• 2015

The purpose of this study was to model the effect of flushing discharge on algae removal by multi-purpose weir operation in Yeongsan River (Seungchon Weir) using a 3-dimensional (3D) model. The chlorophyceae Eudorina sp. formed bloom in May 2013. Flushing discharge was conducted in two different ways for algal bloom reduction. To elucidate the spatial variability, a high-resolution 3D model, ELCOM-CAEDYM, was used to simulate the spatial variations of water quality and chl-a over a month. The results showed that ELCOM-CAEDYM could reproduce highly spatially resolved field data at low cost, and showed very good performance in simulating the pattern of algal bloom occurrence. The effect of each flushing discharge operation was analyzed with the results of modeling. The results of case 1, flushing discharge using an open movable weir, showed that the algal bloom between the Seochang Bridge and the Hwangryong River junction is rapidly flushed after operating the movable weir, but the residual algae remained in the weir pool as the discharge decreased. However, the results of case 2, fixed weir overflow with a small hydropower stop, showed that most of the algae was removed after flushing discharge and the effect of algae removal was much bigger than that in case 1, as per modeling results and observed data.

• Journal of Korea Water Resources Association
• /
• v.38 no.8 s.157
• /
• pp.655-664
• /
• 2005

A real-time monitoring and modeling system (RTMMS) for rainfall-induced turbidity flow, which is one of the major obstacles for sustainable use of reservoir water resources, is under development. As a prediction model for the RTMMS, a laterally integrated two-dimensional hydrodynamic and water quality model, CE-QUAL-W2 was tested by simulating the temperature stratification, density flow regimes, and temporal and spatial distributions of turbidity in a reservoir. The inflow water temperature and turbidity measured every hour during the flood season of 2004 were used as the boundary conditions. The monitoring data showed that inflow water temperature drop by 5 to $10^{\circ}C$ during rainfall events in summer, and consequently resulted in the development of density flow regimes such as plunge flow and interflow in the reservoir. The model showed relatively satisfactory performance in replicating the water temperature profiles and turbidity distributions, although considerable discrepancies were partially detected between observed and simulated results. The model was either very efficient in computation as the CPU run time to simulate the whole flood season took only 4 minutes with a Pentium 4(CPU 2.0GHz) desktop computer, which is essentially requited for real-time modeling of turbidity plume.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.6
• /
• pp.423-446
• /
• 2023

Shield TBM tunnel linings are segmented into segments and rings. This study investigates the response characteristics of the stress and displacement of the segment lining under seismic waves through modeling that considers the interface behavior between segments by applying a shell interface element to the contact surface between segments and rings. And there is no management criteria for ovaling deformation of segment linings in Korea. So, this study the ovality criteria and meaning of segment lining. The results of study showed that the distribution patterns of stress and displacement under seismic waves were similar between continuous linings and segment linings. However, the maximum values of stress and displacement showed differences from segment linings. The stress distribution of the continuous lining modeled as a shell type has a stress distribution that has continuity in the 3D cylindrical shape, but the segment lining is concentrated outside the segment, and the largest stress occurs at the location where the contact surface between the segment and the ring is concentrated. This intermittent and localized stress distribution shows an increasing as the ovality of the lining increases at seismic waves. The ovality at which the increase in stress distribution begins to show irregularity and localization is about 150‰. Ovality of 150‰ is an unrealistic value that cannot represent actual lining deformation. Therefore, the ovality of the segment lining increase with depth, but it does not have a significant impact on the stability caused by seismic load.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.5 no.2
• /
• pp.37-46
• /
• 1987

The single photo method has a lot of applications in forestry, traffic accident managements, industry, criminal investigation, and in daily life. In this study a new single photo method was developed by classifying into the Space resection method and the 2 Dimensional Perspective Transformation method. Metric and nonmetric cameras were used to analyse the accuracy by means of single photo method, and the errors in coordinates and lengths were studied by changing the number and arrangement of control points to obtain the optimum condition for the single photo method. The influence of number and arrangement of control points on the accuracy was relatively small in case of the Metric WILD P31 and ASAHI PENTAX 6$\times$7 cameras, where as for errors it was a major factor in the Non-metric Nikon FM2. To overcome these defects, at least 6 control points should be used for the errors to be convergent and they should be distributed evenly over the surveying area. It was found that accuracy increased as the object to be photographed was placed in the perpendicular direction to the axis of camera.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.23-23
• /
• 2003

Cu 단결정과 다결정 Cu 막대(rod)를 시료로 하여 구부린 완전결정(bent perfect crystal, BPC)을 이용한 중성자 단색기의 특성을 평가함으로써 단결정 회절 및 집합조직 측정장치인 4축 단결정 회절장치(FCD)에 BPC 단색기를 적용할 수 있는지 시험하였다. 측정은 한국원자력연구소의 연구용 원자로인 하나로의 571 수평공에 구성된 test station에서 수행하였다. 단색기와 시료 사이의 거리는 3000mm, 시료와 검출기 사이는 600mm, 단색화빔 인출각도(2θ/sub M/)는 44.6°로 고정하여 FCD와 거의 같은 배치를 구현하였다 직사빔의 단면분포와 강도는 저효율 2차원 위치민감형 검출기(2-D PSD)를 이용하여 확인하였다. 이 검출기는 검출면적 90x90㎟, 공간 분해능 1.2mm, 검출효율 약 1%인 저효율 검출기이다. 회절빔은 검출면적 190x190㎟, 검출효율은 1Å에서 60%인 고효율 2-D PSD를 이용하여 측정하였다. Cu 단결정 측정에 사용한 ePC 단색화 결정은 200×40×3.4㎣ 크기의 Si(220) 슬랩이며, 비대칭 기하로 Si(331)면을 사용하여 파장 λ=0.954Å으로 중성자빔을 단색화시켰다. BPC-Si를 구부려 슬랩의 곡률반경을 변화시키면서 단색기-시료-검출기가 평행배치일 때 Cu(200), (220), (400), (420)면의 rocking curve를 측정하여 각 조건에서의 분해능과 강도를 평가하였다. BPC 단색기를 집합조직 측정에 적용할 수 있는지 시험하기 위하여 다결정 Cu 막대(직경 4.5mm, 길이 18mm)를 시료로 선택하였다. 207x30x3.0㎣ 크기의 Si 슬랩을 단색화 결정으로 사용하였다. 이 슬랩은 다양한 결정면을 이용한 특별한 기하를 구현할 수 있도록 Si(111)면에서 10° 벗어난 면을 절단한 것이다. 비대칭 기하로 Si(311)면을 사용하여 파장 λ=1.253Å의 단색화된 중성자빔으로 측정하였다 BPC-Si를 구부려 슬랩의 곡률반경을 변화시키면서 단색기-시료-검출기가 평행파 반평행배치일 때 Cu(111), (200), (220), (311), (331), (420)면의 회절선을 측정하여 각 조건에서 분해능과 강도를 평가하였다.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_3
• /
• pp.1643-1652
• /
• 2020

To investigate the characteristics of detailed flows in a building-congested district, we coupled a computation fluid dynamics (CFD) model to the local data assimilation and prediction system (LDAPS), a current operational numerical weather prediction model of the Korea Meteorological Administration. For realistic numerical simulations, we used the meteorological variables such as wind speeds and directions and potential temperatures predicted by LDAPS as the initial and boundary conditions of the CFD model. We trilinearly interpolated the horizontal wind components of LDAPS to provide the initial and boudnary wind velocities to the CFD model. The trilinearly interpolated potential temperatures of LDAPS is converted to temperatures at each grid point of the CFD model. We linearly interpolated the horizontal wind components of LDAPS to provide the initial and boundary wind velocities to the CFD model. The linearly interpolated potential temperatures of LDAPS are converted to temperatures at each grid point of the CFD model. We validated the simulated wind speeds and directions against those measured at the PKNU-SONIC station. The LDAPS-CFD model reproduced similar wind directions and wind speeds measured at the PKNU-SONIC station. At 07 LST on 22 June 2020, the inflow was east-north-easterly. Flow distortion by buildings resulted in the east-south-easterly at the PKNU-SONIC station, which was the similar wind direction to the measured one. At 19 LST when the inflow was southeasterly, the LDAPS-CFD model simulated southeasterly (similar to the measured wind direction) at the PKNU-SONIC station.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.4-4
• /
• 2000

일반적인 액체추진제 로켓엔진의 연소는 분사제트의 미립화, 액적의 증발, 기상 추진제의 혼합, 화학반응 등, 일련의 물리적 과정들로 이루어지고, 여기서 특성속도 효율은 크게 분사특성 및 연소의 두 단계에서 결정되게 된다. 액체추진제 로켓엔진에 사용되는 여러 분무형태 중, 동축형 분사기에서는 액상과 기상 제트의 운동량 차에 의해 미립화가 이루어지며, 분무 액적들의 전개와 더불어 분사기 출구를 포함한 전 영역에서 연소가 발생되므로 매우 복잡한 물리적 특성들을 포함하게 된다. 본 연구에서는 기상 연료-액상 산화제의 동축형 분무연소를 JANNAF의 방법을 사용하여 수식화 하였으며, 이를 바탕으로 분무특성과 연소성능 예측을 위한 프로그램을 작성, 분사조건에 의한 분무특성과 그에 따른 연소성능을 계산하였다. 연속, 운동량, 에너지 및 혼합비 방정식의 지배방정식들을 바탕으로 기상 유동을 수식화 하였으며, 별도로 액적의 소산 및 연소과정을 모사하기 위한 별도의 수식들이 추가되었고, 이 식들을 결합하여 액적의 크기, 분포를 포함하는 액체 제트의 미립화 정도를 공간적으로 계산하였다. 미립화 모델의 검증을 위하여 계산 결과를 Reitz의 실험과 Giridharan의 모델 등과 비교하였으며 잘 일치하는 경향을 나타내었다. 또한 동축형 분사기에서의 분무 특성을 예측하기 위해 액체 산소, 기체 수소를 추진제 조합으로 하는 동축형 분무 연소장에서의 제트 길이, 액적의 크기, 액체 제트의 속도를 계산하였다. 계산 결과 액체 제트의 접촉길이는 분사공의 지름이 증가할수록 웨버수가 증가되므로 짧아지는 것으로 관찰되었으며 액적의 크기도 분사공의 지름이 증가할수록 작아지는 경향을 나타내었다. 액체 제트의 속도는 처음에는 일정하게 유지되다가 운동량을 보존하기 위해 가스로부터 운동량을 받아 점차 가속되어지는 것으로 나타났다.본 규격은 키, 총장, 어깨길이, 등길이, 머리길이, 머리둘레, 진동둘레, 목둘레, 가슴둘레, 허리둘레, 배둘레, 엉덩이둘레, 앞품, 뒤품, drop치를 포함하고 있고, 각 규격에서 호칭간 치수 간격도 함께 제시하고 있다. 본 연구 결과에서 보듯, 현행 8규격의 무진복의 각 호칭간 적정 허용범위를 고려해 합리적인 치수체계를 정립한다면 치수에 대한 적합도가 상당히 증가할 뿐 아니라 생산비용도 상당히 감축할 것으로 생각된다.나타났다. 4) 호감적 서비스능력 차원에서 세 독립변수간에 유의한 3원 상호작용이 존재하는 것으로 나타나( $F_{2,228}$=15.62, P<.001) 20대에 적합한 의복 착용시( $F_{2,228}$=3.98, P<.05)와 60대에 적합한 의복 착용시( $F_{2,228}$=16.55, P<.001) 점포유형과 격식차림간에는 유의한 상호작용이 존재하는 것으로 나타났다. 5) 호감을 구성하는 세 요인들이 구매의도에 미치는 영향을 조사한 결과 호감적 인상차원은 29%(P<.001), 호감적 서비스능력차원은 6%(P<.001)의 구매의도를 설명해 주는 것으로 나타났다. 본 연구결과 노년 소비자에게 호감을 주는 판매원의 외모는 구매의도에 영향을 주어 실버의류산업의 이익증대와 밀접한 연관을 갖는 서비스품질의 중요한 요인으로 밝혀졌다.중요한 요인으로 밝혀졌다.로운 단백질 EPSPS가 다른 여러 식물에 이미 존재하고 있는 단백질로서 우리가 이미 이러한 식품을 섭취할 때 이 단백질도 같이 섭취해오고 있었다는 점, 둘째. 이 단백질이 소화액 분해 실험에서 짧은 시간내에 분해가 되었다는 점, 셋째. 재조합 된 콩과 자연 콩이 성분 분석에서 차이를 나타내지 않았다는 점, 네 번째. 쥐를 통한 다양섭취 실험에서 아무런 이상 반응이 없었

• Journal of Soil and Groundwater Environment
• /
• v.10 no.5
• /
• pp.52-60
• /
• 2005

The conceptual model of under-sampled study area will include a great amount of uncertainty. In this study, we investigate the applicability of Markov chain model in a spatial domain as a tool for minimizing the uncertainty arose from the lack of data. A new formulation is developed to generalize the previous two-dimensional coupled Markov chain model, which has more versatility to fit any computational sequence. Furthermore, the computational algorithm is improved to utilize more conditioning information and reduce the artifacts, such as the artificial parcel inclination, caused by sequential computation. A generalized 20 coupled Markov chain (GCMC) is tested through applying a hypothetical soil map to evaluate the appropriateness as a substituting model for conventional geostatistical models. Comparing to sequential indicator model (SIS), the simulation results from GCMC shows lower entropy at the boundaries of indicators which is closer to real soil maps. For under-sampled indicators, however, GCMC under-estimates the presence of the indicators, which is a common aspect of all other geostatistical models. To improve this under-estimation, further study on data fusion (or assimilation) inclusion in the GCMC is required.

• Tunnel and Underground Space
• /
• v.10 no.2
• /
• pp.237-248
• /
• 2000

Based on the preliminary results from the therm analysis, which is currently carrying, three-dimensional computer simulations using a finite element code, ABAQUS Ver. 5.8, were designed to determine the mechanically stable cavern and deposition hole spacing. Linear elastic modeling for the cases with different cavern and deposition hole spacing were carried out under three different in situ stress conditions. From the simulations, the response of the rock to the stress redistribution after the excavation of the openings could be investigated. Also the optimum cavern and deposition hole spacing could be estimated based on the factor of safety. When the in situ stress determined from the actual stress measurements in Korea were used, the case with cavern spacing of 40m and deposition hole spacing of 3m was in very stable condition, because the factor of safety was calculated as 3.42., When the in situ stress conditions for Sweden and Canada were used, the previous case, they seem to be in stable condition, since the factors of safety are still higher than 1.0. From these results, it was concluded that the rock will not fail even after the stress redistribution.