A Study on the Determination of Plane Coordinates Using Single Photo Method

단사진 해석기법을 이용한 평면좌표 결정에 관한 연구

  • Published : 1987.12.01

Abstract

The single photo method has a lot of applications in forestry, traffic accident managements, industry, criminal investigation, and in daily life. In this study a new single photo method was developed by classifying into the Space resection method and the 2 Dimensional Perspective Transformation method. Metric and nonmetric cameras were used to analyse the accuracy by means of single photo method, and the errors in coordinates and lengths were studied by changing the number and arrangement of control points to obtain the optimum condition for the single photo method. The influence of number and arrangement of control points on the accuracy was relatively small in case of the Metric WILD P31 and ASAHI PENTAX 6$\times$7 cameras, where as for errors it was a major factor in the Non-metric Nikon FM2. To overcome these defects, at least 6 control points should be used for the errors to be convergent and they should be distributed evenly over the surveying area. It was found that accuracy increased as the object to be photographed was placed in the perpendicular direction to the axis of camera.

단사진을 이용한 측량은 교통, 산업, 산림, 범죄수사 및 일상생활에서 많은 활용면이 있으므로 본 논문에서는 이와같은 단사진 측량방법중 공간후방교회법(Space Resection)을 이용하는 방법과 2차원 사영변환을 이용하는 방법으로 나누어 해석기법을 제시하였다. 또한 측량용 비측량용 사진기를 사용한 단사진의 정확도를 비교분석 하였으며, 정확도를 향상시킬 수 있는 최적의 상태를 알기 위하여 기준점 수 및 배치형태를 변화시키면서 좌표 및 길이의 오차에 대하여 분석하였다. 그 결과 초점거리가 긴 측량용사진기 Wild P31이나 중형사진기 ASAHI PENTAX 6$\times$7의 경우 기준점 수 및 배치형태가 오차에 미치는 영향이 작았으나 초점거리가 짧은 비측량용 사진기 NIKON FM2는 기준점수 및 배치형태가 오차에 미치는 영향이 컸다. 따라서 이러한 단점을 극복하고 오차가 수렴하기 위해서는 최소한 기준점수 6점 이상을 측량대상 지역에 고루 분포시키고 또한 측량대상물을 촬영축에 직각방향으로 배치하여야 한다는 것을 알 수 있었다.

Keywords