• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.185-190
• /
• 2003

고유전물질인 $HfO_2$ 극박막에 사용될 TaN metal 전극에 대한 특성에 대한 연구를 하였다. 고유전물질인 $HfO_2$는 4" p-type wafer를 SCI cleaning후 ALD(atomic layer deposition)을 통해 $50\AA$를 증착하였다. Ff source는 TEMAH를 이용하였으며 Oxygen source는 $H_2O$를 이용하였다. 이렇게 증착한 $HfO_2$ 극박막에 Ta target을 이용하여 질소 가스를 Ar가스에 첨가하여 reactive sputtering을 통해서 TaN 전극을 증착하였다. TaN 박막의 증착두께는 a--step과 TEM을 통해서 확인하였으며 면저항은 four point probe를 이용하여 측정하였다. 이렇게 증착된 $HfO_2/TaN$구조에 대한 전기적 특성을 측정하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.173.2-173.2
• /
• 2014

Thin nitride thin films were synthesized by reactive radio-frequency magnetron sputtering in the ultra high vacuum (UHV) chamber. To control the characteristics of thin films, tin nitride thin films were obtained various argon and nitrogen gas mixtures, especially low nitrogen gas ratios. Tin nitride thin films were analyzed with alpha step, scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and 4 point probe measurement. The result of alpha step and SEM showed that the thickness of thin nitride thin films were decreased with increasing nitrogen gas ratios. The metallic tin structure was decreased and the amorphous tin nitride structure were observed by XRD with higher nitrogen gas ratios. The oxidation state of tin and nitride were studied with high resolution Sn 3d and N 1s XP spectra.

• 한국전자파학회논문지
• /
• 제25권12호
• /
• pp.1219-1227
• /
• 2014

펄스 레이저 증착(Pulsed laser Deposition: PLD) 및 RF 스퍼터링 증착(Sputtering Deposition)의 단계적 적용을 통해, 표면탄성파 대역 통과 필터(Surface Acoustic Wave Bandpass Filter: SAW-BPF)용 ZnO 박막을 성장시켰다. PLD 방법으로 성장된 ZnO 박막위에 RF sputtering 방법을 사용하여 ZnO 박막을 재증착시켰으며, 성장된 ZnO 박막의 물성을 분석하기 위하여 XRD, SEM 및 AFM 분석장비를 사용하였다. 두 가지 증착 방법이 단계적으로 적용되어 성장된 ZnO 박막의 경우, 결정성과 배향성이 우수하게 유지되면서 표면거칠기가 향상되었다. 분석 결과, ${\omega}$-scan의 반치폭과 표면거칠기의 RMS 값은 각각 $0.79^{\circ}$와 1.108 nm였다. 그리고 성장된 양질의 ZnO 박막을 사용하여 SAW-BPF를 제작하여 측정한 결과는 응답 특성의 중심주파수가 260.8 MHz, 대역폭은 2.98 MHz, 그리고 삽입손실은 36.5 dB이었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.99-99
• /
• 2010

Recently, amorphous transparent oxide semiconductors (TOS) have been widely studied for many optoelectronic devices such as AM-OLED (active-matrix organic light emitting diodes). The TOS TFTs using a-IGZO channel layers exhibit a high electron mobility, a smooth surface, a uniform deposition at a large area, a high optical transparency, a low-temperature fabrication. In spite of many advantages of the sputtering process such as better step coverage, good uniformity over large area, small shadow effect and good adhesion, there are not enough researches about characteristics of a-IGZO thin films. In this study, therefore, we focused on the electrical properties of a-IGZO thin films as a channel layer of TFTs. TFTs with the a-IGZO channel layers and Y2O3 gate insulators were fabricated. Source and drain layers were deposited using ITO target. TFTs were deposited on unheated non-alkali glass substrates ($5cm{\times}5cm$) with a sintered ceramic IGZO disc (3 inch $\varnothing$, 5mm t), Y2O3 disc (3 inch $\varnothing$, 5mm t) and ITO disc (3 inch $\varnothing$, 5mm t) as a target by magnetron sputtering method. The O2 gas was used as the reactive gas. Deposition was carried out under various sputtering conditions to investigate the effect of sputtering process on the characteristics of a-IGZO thin films. Correlation between sputtering factors and electronic properties of the film will be discussed in detail.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.464-466
• /
• 2000

AIN thin films have been prepared by reactive sputtering method, using facing targets sputtering system with a DC power supply which can deposit a high quality thin film and control deposition condition in all range of nitrogen. The crystallographic characteristics of AIN thin films on N$_2$/Ar ratio was investigated by alpha-step and X-ray diffraction. As a result, the AIN film deposited at the pressure ratio of the nitrogen of 30% revealed strong X-ray diffraction intensity under substrate temperature 25$^{\circ}C$ and applied current 0.4A.

• 한국수소및신에너지학회논문집
• /
• 제14권1호
• /
• pp.8-16
• /
• 2003

$TiO_2$ thin films were deposited by DC reactive magnetron sputtering with variations in sputtering parameter such as Ar and $O_2$ flow rate, DC power, substrate temperature and magnetic field. Deposition rate, crystal structure, chemical bond of $TiO_2$ films on the deposition conditions were investigated by Alpha-step, X-ray Diffractometer(XRD), X-ray Photoelectron Spectroscopy(XPS). When the DC power was applied at 500watt, deposition rate of $TiO_2$ film was about 480A/min. $TiO_2$ films coated under the deposition condition of 15sccm Ar and 7~10sccm $O_2$ flow rate was only observed anatase phase. With increasing substrate temperature from RT to $300^{\circ}C$, crystal orientation of $TiO_2$ films variously became.

• 대한환경공학회지
• /
• 제27권1호
• /
• pp.59-66
• /
• 2005

[ $TiO_2$ ]박막은 DC 마그네트론 스퍼터링법을 이용하여 다양한 스퍼터링 파라미터(전력 $0.6{\sim}5.2\;kw$, 기판온도 실온${\sim}350^{\circ}C$, 산소량 $0{\sim}50\;sccm$($O_2+Ar$ 90 sccm, 압력은 약 1 mtorr))를 통하여 증착되었다. TiO-N박막도 가스의 유량비를 제외하고는 $TiO_2$박막과 같은 스퍼터링 조건하에서 증착되었다. 이러한 스퍼터링 파라미터에서 증착된 박막의 전기적 특성을 분석하기 위하여 시트저항을 측정하였고, 박막의 두께(${\alpha}$-step), 표면 거칠기(AFM), 형성 조직(FE-SEM, XRD)을 분석하여 최적 스퍼터링 파라미터를 도출하였다. 최적 스퍼터링 파라미터에서 제조된($TiO_2$, TiO-N)박막을 이용하여 광활성도를 평가하기 위하여 VOCs물질 중 toluene, 반응성 염료인 Suncion Yellow를 대상 물질로 선정하여 적용성 연구를 수행하였다. 실험에서 광촉매 박막은 적용물질에 대해서 광활성을 양호하게 보였으며, 특히 TiO-N광촉매 박막은 가시광 영역에서도 최대 33%의 톨루엔(5 ppm) 제거 효율을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.103-106
• /
• 2002

We prepared $Co_{77}Cr_{20}Ta_{3}$ thin film with Facing Targets Sputtering Apparatus. which can deposit a high quality thin film CoCrTa magnetic layer for Perpendicular magnetic recording media. In order to obtain Good Crystal orientation of CoCrTa thin films. We prepared Thin Films on slide glass substrate. The thickness of Buffer-layer were varied from 10 to 50 nm and Magnetic layer thickness fixed 100[nm]. input current was varied from 0.2[A] to 0.5[A]. Substrate temperature was varied from room temperature to ${250^{\circ}C}$ respectively. The crystal orientation of the CoCrTa film were examined with XRD. Introduce Buffer-layer thin films showed improvement of dispersion angle of c-axis orientation (${\Delta\theta}_{50}$).

• 한국재료학회지
• /
• 제14권11호
• /
• pp.821-827
• /
• 2004

Titanium oxide thin films were prepared on Si(100) substrates by R.F. magnetron reactive sputtering at $30\sim200watt$ R.F power range, and annealed at $600^{\circ}C\sim800^{\circ}C$ for 1 hour. The properties of $TiO_2$ thin films were analyzed using x-ray, ${\alpha}-step$, ellipsometer, scanning electron microscopy, and FT-IR spectrometer. Upon in-situ depositions, the initial phase of $TiO_2$ thin film showed non-crystalline phase at R.F. power $30\sim100$ watt. The crosssection of $TiO_2$ thin films were sbserved to be the columnar structure. With the increasing R.F power and annealing temperature, the grain size, crystallinity, refractive index, and void size of titanium oxides showed a tended to increase. The FT-IR transmittance spectra of titanium oxide thin films have the obsorption band of Ti-O bond, Si-O bond, Si-O-Ti bond and O-H bond. With the increase of R.F. power and annealing temperature, these films have the stronger bond structures. It is considered that such a phenomena is due to phase transition and good crystallinity

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1478-1480
• /
• 2001

ZnO : Al transparent conductive thin films were prepared by facing targets sputtering system with a DC power supply which can deposit a high quality thin films and control deposition condition in all range of $O_2$ gas ratio using ZnO target containing 8 at% of Al. Sputtering was carried out at a substrate temperature of R T with a DC current of 0.6 A and $O_2$ flow rate of 0 $\sim$ 0.9. The characteristics of ZnO : Al thin films was investigated by $\alpha$-step, four point probe, X-ray diffraction and UV/VIS spectrometer.