• 한국전기전자재료학회논문지
• /
• 제19권8호
• /
• pp.754-757
• /
• 2006

The inorganic multi-layer thin film encapsulation was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam, sputter, inorganic multi-layer thin-film encapsulation was deposited onto the Polyethylene Terephthalate (PET) and their interface properties between inorganic and organic layer were investigated. In this investigation, the SiON, $SiO_2$ and parylene layer showed the most suitable properties. Under these conditions, the WVTR for PET can be reduced from level of $0.57g/m^2/day$ (bare subtrate) to $1*10^{-5}g/m^2/day$ after application of a SiON and $SiO_2$ layer. These results indicates that the $PET/SiO_2/SiON/Parylene$ barrier coatings have high potential for flexible organic light-emitting diode(OLED) applications.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1998년도 가을 학술발표논문집 Vol.25 No.2 (3)
• /
• pp.462-464
• /
• 1998

이질적인 환경 (Heterogoneous Environments)에서 실시간 멀티미디어 서비스가 확산됨에 따라 비디오 데이터로 인한 트래픽이 통신망을 오가는 트래픽의 대부분을 차지하게 되었다. 이에 통신망 자원의 효율화를 위해서 사용자의 통신망 환경을 고려한, 비디오 데이터 스케러블 전송이 필요하다. 이를 위해 MPEG-2에서는 비디오 데이터를 Base layer와 Enhancement layer로 나누는 layered coding 방식을 채택할 수 있게 하여 낮은 대역폭인 경우는 Base layer만 보내고 높은 대역폭인 경우 Base layer와 Enhancement layer를 모두 보내는 방식을 사용할 수 있도록 하였으나, 실질적으로는 Base layer만으로도 데어터 량이 많아 이를 적용하는 인코더는 현재 전무한 실정이다. 따라서 본 논문에서는 Base layer를 MPEG-2비디오 데이터 스케러블 전송에 맞게 초당 디스플레이하는 프레임 수를 동적으로 조정하는 temporal layered coding을 통해 사용자 통신망 환경에 맞게 비디오 데이터를 보내는 방법을 제안한다.

• 한국전기전자재료학회논문지
• /
• 제14권10호
• /
• pp.855-860
• /
• 2001

Bi$_2$Sr$_2$CuO$_{x}$(Bi-2201) thin film were fabricated by atomic layer-by -layer deposition using an ion beam sputtering method. 10 wt% and 90 wt% ozone mixed oxygen were used with ultraviolet light irradiation to assist oxidation. XRD and RHEED investigations revealed that a buffer layer is formed at the early stage of deposition (less than 10 unit cell), and then c-axis oriented Bi-2201 grows on top of it.t.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2499-2510
• /
• 2020

We performed 3-D (3-dimensional) IVR (In-Vessel Retention) natural convection experiments simulating the oxide layer in the three-layer configuration, varying the aspect ratio (H/R). Mass transfer experiment was conducted based on the analogy to achieve high Ra_H's of 1.99 × 10¹²-6.90 × 10¹³ with compact facilities. Comparisons with 2-D (2-dimensional) experiments revealed different local heat transfer characteristics on upper and lower boundaries of the oxide layer depending on the H/R. For the 3-D shallow oxide layer, the multi-cell flow patterns appeared and the number of cells was considerably increased with the H/R decreases, which differs with the 2-D experiments that the number of cells was independent on H/R. Thus, the enhancement of the downward heat transfer and the mitigation of the focusing effect were more noticeable in the 3-D experiments.

• International Journal of Ocean System Engineering
• /
• 제2권2호
• /
• pp.92-96
• /
• 2012

This study presents a rockfall impact analysis of a typical roadway. Dynamic finite element analyses using ANSYS AUTODYN are conducted to determine the effect of the drop heights (5 m, 10 m) on the damage to a roadway model. The Rockfall is modeled as a spherical shape with a weight of 400 kg, and each drop height is converted to a corresponding impact velocity to save computational time. The roadway model is comprised of an asphalt layer, base layer, sub-base layer, and sub-grade layer. In this paper, the asphalt is modeled using a linear elastic model. The base layer, sub-base layer, and sub-grade layer are modeled using a Mohr-Coulomb model. From the analyses, the effects of the drop height on the damages and stresses are examined and discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.437-438
• /
• 2008

박막태양전지에서 p-layer, i-layer, n-layer의 thickness와 doping concentration은 가장 기본이 되는 요소이다. 각 layer에서 위 두 가지 요소를 ASA simulator를 이용해서 높은 효율을 갖는 박막태양전지를 설계하기 위해 조절하였다. Simulation결과 p-layer의 thickness는 $9.5*10^{-9}m$, doping concentration은 0.2eV, i-layer의 thickness는 $4.535*10^{-7}m$, n-layer의 thickness는 $2*10^{-8}m$, doping concentration 은 0.1eV에서 최종 11.48%의 효율을 얻을 수 있었다. 본 연구를 통하여 높은 효율의 박막태양전지 설계 시에 도움이 될 수 있을 것이다.

• 한국식품영양과학회지
• /
• 제25권3호
• /
• pp.497-503
• /
• 1996

In order to obtain basic data for the preparation of rice flour, chemical properties of grain layers were compared using Chucheongbyeo and Samgangbyeo, which are Japonica and Tongil type rice, respectively. The amylose contents of L6(center) layer in two different type of rice were the highest among 6 layers of rice grain tested. Reduction in amylose content was observed as the layer reached the surface, resulting in the lowest amylose content in the L0 layer. Amylose contents of L6 layer of Chucheongbyeo and Sangangbyeo were 3 and 2.2 times higher than those of L1 layer, respectively. Crude protein content of the L2 layer was the highest among 6 layers of rice grain tested and 2.2~2.5 times higher than that of whole milled rice. Crude fat content of grain layer was reduced as reaching the center layer. The crude fat contents of L6 layer of grain were 0.21% and 0.25% in Chucheongbyeo and Samgangbyeo, respectively. Most of free and bound lipids in L0 layer of two different rices were 69 : 31 and 79.5 : 20.5, respectively. Bound lipid content of grain layers increased as reaching the center layer. Major fatty acids in free lipids of both cultivars were linoleic acid, oleic acid, and palmitic acid. Linoleic acid content was higher than oleic acid in Chucheongbyeo, but oleic acid content was higher in Samgangbyeo. Palmitic and myristic acid contents of Chucheongbyeo were higher than those of Samgangbyeo, but stearic and linolenic acid contents were lower than those of Samgangbyeo.

• 박물관보존과학
• /
• 제29권
• /
• pp.65-80
• /
• 2023

본 연구는 통일신라 하대 전돌 유약의 재료학적 특성을 파악하기 위하여 포항 법광사지 출토 납유 전돌 7점을 조사하였다. 유약의 표면과 단면을 현미경으로 관찰하여 다양한 수화양상을 확인하고 이를 표면층·수화층A·수화층B·녹색층으로 분류하였다. 이들 각 층의 화학조성을 주사전자현미분석으로 측정한 결과, 수화의 영향이 가장 적은 녹색층이 원 조성으로 추정된다. 이 녹색층은 주성분이 PbO와 SiO₂가 8 : 2의 비율로 나타나고 주요 발색원소인 CuO를 약 2% 내외로 함유한 저화도 유약이다. 녹색층은 경상도 납유 전돌의 기 분석된 주성분 자료들과 비교 검토하여 법광사지 납유 조성이 사천왕사지, 천룡사지, 부석사지 바닥전과 유사함을 밝혀냈다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.456-456
• /
• 2009

Boron doping on an n-type Si wafer is requisite process for IBC (Interdigitated Back Contact) solar cells. Fiber laser annealing is one of boron doping methods. For the boron doping, uniformly coated or deposited film is highly required. Plasma enhanced chemical vapor deposition (PECVD) method provides a uniform dopant film or layer which can facilitate doping. Because amorphous silicon layer absorption range for the wavelength of fiber laser does not match well for the direct annealing. In this study, to enhance thermal affection on the existing p-a-Si:H layer, a ${\mu}c$-Si:H intrinsic layer was deposited on the p-a-Si:H layer additionally by PECVD. To improve heat transfer rate to the amorphous silicon layer, and as heating both sides and protecting boron eliminating from the amorphous silicon layer. For p-a-Si:H layer with the ratio of $SiH_4$ : $B_2H_6$ : $H_2$ = 30 : 30 : 120, at $200^{\circ}C$, 50 W, 0.2 Torr for 30 minutes, and for ${\mu}c$-Si:H intrinsic layer, $SiH_4$ : $H_2$ = 10 : 300, at $200^{\circ}C$, 30 W, 0.5 Torr for 60 minutes, 2 cm $\times$ 2 cm size wafers were used. In consequence of comparing the results of lifetime measurement and sheet resistance relation, the laser condition set of 20 ~ 27 % of power, 150 ~ 160 kHz, 20 ~ 50 mm/s of marking speed, and $10\;{\sim}\;50 {\mu}m$ spacing with continuous wave mode of scanner lens showed the correlation between lifetime and sheet resistance as $100\;{\Omega}/sq$ and $11.8\;{\mu}s$ vs. $17\;{\Omega}/sq$ and $8.2\;{\mu}s$. Comparing to the singly deposited p-a-Si:H layer case, the additional ${\mu}c$-Si:H layer for doping resulted in no trade-offs, but showed slight improvement of both lifetime and sheet resistance, however sheet resistance might be confined by the additional intrinsic layer. This might come from the ineffective crystallization of amorphous silicon layer. For the additional layer case, lifetime and sheet resistance were measured as $84.8\;{\Omega}/sq$ and $11.09\;{\mu}s$ vs. $79.8\;{\Omega}/sq$ and $11.93\;{\mu}s$. The co-existence of $n^+$layeronthesamesurfaceandeliminating the laser damage should be taken into account for an IBC solar cell structure. Heavily doped uniform boron layer by fiber laser brings not only basic and essential conditions for the beginning step of IBC solar cell fabrication processes, but also the controllable doping concentration and depth that can be established according to the deposition conditions of layers.

• 한국지능시스템학회논문지
• /
• 제14권2호
• /
• pp.228-233
• /
• 2004

최근 들어, 다양하고 복잡한 기능을 갖는 로봇이 요구되고 있다. 그러나 이전의 알고리즘으로는 그러한 요구를 만족시킬 수 없다. 이러한 문제를 해결하기 위해, 본 논문에서는 다양한 입력과 출력을 다루는 경우에도 작은 개수의 퍼지 룰을 갖고, 효율적이고 강인하게 제어할 수 있는 2-Layer Fuzzy Controller를 소개한다. 그런데 퍼지 제어기에서의 중요한 문제점은 퍼지 룰 베이스를 어떻게 설계하는지에 달려 있다. 본 논문은 Schema Co-Evolutionary Algorithm을 이용하여 최적의 2-Layer Fuzzy Controller를 설계하는데, 이 Schema Co-Evolutionary Algorithm은 simple GA보다 더 빠르고 우수하게 최적해를 찾을 수 있다.