• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.8
• /
• pp.754-757
• /
• 2006

The inorganic multi-layer thin film encapsulation was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam, sputter, inorganic multi-layer thin-film encapsulation was deposited onto the Polyethylene Terephthalate (PET) and their interface properties between inorganic and organic layer were investigated. In this investigation, the SiON, $SiO_2$ and parylene layer showed the most suitable properties. Under these conditions, the WVTR for PET can be reduced from level of $0.57g/m^2/day$ (bare subtrate) to $1*10^{-5}g/m^2/day$ after application of a SiON and $SiO_2$ layer. These results indicates that the $PET/SiO_2/SiON/Parylene$ barrier coatings have high potential for flexible organic light-emitting diode(OLED) applications.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.462-464
• /
• 1998

이질적인 환경 (Heterogoneous Environments)에서 실시간 멀티미디어 서비스가 확산됨에 따라 비디오 데이터로 인한 트래픽이 통신망을 오가는 트래픽의 대부분을 차지하게 되었다. 이에 통신망 자원의 효율화를 위해서 사용자의 통신망 환경을 고려한, 비디오 데이터 스케러블 전송이 필요하다. 이를 위해 MPEG-2에서는 비디오 데이터를 Base layer와 Enhancement layer로 나누는 layered coding 방식을 채택할 수 있게 하여 낮은 대역폭인 경우는 Base layer만 보내고 높은 대역폭인 경우 Base layer와 Enhancement layer를 모두 보내는 방식을 사용할 수 있도록 하였으나, 실질적으로는 Base layer만으로도 데어터 량이 많아 이를 적용하는 인코더는 현재 전무한 실정이다. 따라서 본 논문에서는 Base layer를 MPEG-2비디오 데이터 스케러블 전송에 맞게 초당 디스플레이하는 프레임 수를 동적으로 조정하는 temporal layered coding을 통해 사용자 통신망 환경에 맞게 비디오 데이터를 보내는 방법을 제안한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.10
• /
• pp.855-860
• /
• 2001

Bi$_2$Sr$_2$CuO$_{x}$(Bi-2201) thin film were fabricated by atomic layer-by -layer deposition using an ion beam sputtering method. 10 wt% and 90 wt% ozone mixed oxygen were used with ultraviolet light irradiation to assist oxidation. XRD and RHEED investigations revealed that a buffer layer is formed at the early stage of deposition (less than 10 unit cell), and then c-axis oriented Bi-2201 grows on top of it.t.

• Nuclear Engineering and Technology
• /
• v.52 no.11
• /
• pp.2499-2510
• /
• 2020

We performed 3-D (3-dimensional) IVR (In-Vessel Retention) natural convection experiments simulating the oxide layer in the three-layer configuration, varying the aspect ratio (H/R). Mass transfer experiment was conducted based on the analogy to achieve high Ra_H's of 1.99 × 10¹²-6.90 × 10¹³ with compact facilities. Comparisons with 2-D (2-dimensional) experiments revealed different local heat transfer characteristics on upper and lower boundaries of the oxide layer depending on the H/R. For the 3-D shallow oxide layer, the multi-cell flow patterns appeared and the number of cells was considerably increased with the H/R decreases, which differs with the 2-D experiments that the number of cells was independent on H/R. Thus, the enhancement of the downward heat transfer and the mitigation of the focusing effect were more noticeable in the 3-D experiments.

• International Journal of Ocean System Engineering
• /
• v.2 no.2
• /
• pp.92-96
• /
• 2012

This study presents a rockfall impact analysis of a typical roadway. Dynamic finite element analyses using ANSYS AUTODYN are conducted to determine the effect of the drop heights (5 m, 10 m) on the damage to a roadway model. The Rockfall is modeled as a spherical shape with a weight of 400 kg, and each drop height is converted to a corresponding impact velocity to save computational time. The roadway model is comprised of an asphalt layer, base layer, sub-base layer, and sub-grade layer. In this paper, the asphalt is modeled using a linear elastic model. The base layer, sub-base layer, and sub-grade layer are modeled using a Mohr-Coulomb model. From the analyses, the effects of the drop height on the damages and stresses are examined and discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.437-438
• /
• 2008

박막태양전지에서 p-layer, i-layer, n-layer의 thickness와 doping concentration은 가장 기본이 되는 요소이다. 각 layer에서 위 두 가지 요소를 ASA simulator를 이용해서 높은 효율을 갖는 박막태양전지를 설계하기 위해 조절하였다. Simulation결과 p-layer의 thickness는 $9.5*10^{-9}m$, doping concentration은 0.2eV, i-layer의 thickness는 $4.535*10^{-7}m$, n-layer의 thickness는 $2*10^{-8}m$, doping concentration 은 0.1eV에서 최종 11.48%의 효율을 얻을 수 있었다. 본 연구를 통하여 높은 효율의 박막태양전지 설계 시에 도움이 될 수 있을 것이다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.3
• /
• pp.497-503
• /
• 1996

In order to obtain basic data for the preparation of rice flour, chemical properties of grain layers were compared using Chucheongbyeo and Samgangbyeo, which are Japonica and Tongil type rice, respectively. The amylose contents of L6(center) layer in two different type of rice were the highest among 6 layers of rice grain tested. Reduction in amylose content was observed as the layer reached the surface, resulting in the lowest amylose content in the L0 layer. Amylose contents of L6 layer of Chucheongbyeo and Sangangbyeo were 3 and 2.2 times higher than those of L1 layer, respectively. Crude protein content of the L2 layer was the highest among 6 layers of rice grain tested and 2.2~2.5 times higher than that of whole milled rice. Crude fat content of grain layer was reduced as reaching the center layer. The crude fat contents of L6 layer of grain were 0.21% and 0.25% in Chucheongbyeo and Samgangbyeo, respectively. Most of free and bound lipids in L0 layer of two different rices were 69 : 31 and 79.5 : 20.5, respectively. Bound lipid content of grain layers increased as reaching the center layer. Major fatty acids in free lipids of both cultivars were linoleic acid, oleic acid, and palmitic acid. Linoleic acid content was higher than oleic acid in Chucheongbyeo, but oleic acid content was higher in Samgangbyeo. Palmitic and myristic acid contents of Chucheongbyeo were higher than those of Samgangbyeo, but stearic and linolenic acid contents were lower than those of Samgangbyeo.

• Conservation Science in Museum
• /
• v.29
• /
• pp.65-80
• /
• 2023

This study investigated seven specimens of lead-glazed paving bricks in order to identify the materialistic characteristics of the lead glaze used for paving bricks during the late Unified Silla period in Korea. The samples were excavated from the Beopgwangsa Temple site, Pohang. As a result of observing the surface and cross-section of the glaze with a microscope, the study confirmed that the lead glaze demonstrates various traits of hydration, which were classified into four layers: Surface layer, hydration layer A, hydration layer B, and green layer. After measuring the composition of each layer with SEM-EDS analysis, the green layer was found to have been less affected by the external environment, which renders it highly reasonable to view the green layer as the original composition of the lead glaze. The green layer is a low-temperature glaze composed mainly of PbO and SiO₂ at a ratio of 8:2, with approximately 2% CuO acting as the main colorant. Comparing the green layer composition with those from Gyeongsang-do, it was confirmed that the mixture ratio of lead glaze materials was similar to other sites such as the Sacheonwangsa Temple site, the Cheonryongsa Temple site, and the Buseoksa Temple site.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.456-456
• /
• 2009

Boron doping on an n-type Si wafer is requisite process for IBC (Interdigitated Back Contact) solar cells. Fiber laser annealing is one of boron doping methods. For the boron doping, uniformly coated or deposited film is highly required. Plasma enhanced chemical vapor deposition (PECVD) method provides a uniform dopant film or layer which can facilitate doping. Because amorphous silicon layer absorption range for the wavelength of fiber laser does not match well for the direct annealing. In this study, to enhance thermal affection on the existing p-a-Si:H layer, a ${\mu}c$-Si:H intrinsic layer was deposited on the p-a-Si:H layer additionally by PECVD. To improve heat transfer rate to the amorphous silicon layer, and as heating both sides and protecting boron eliminating from the amorphous silicon layer. For p-a-Si:H layer with the ratio of $SiH_4$ : $B_2H_6$ : $H_2$ = 30 : 30 : 120, at $200^{\circ}C$, 50 W, 0.2 Torr for 30 minutes, and for ${\mu}c$-Si:H intrinsic layer, $SiH_4$ : $H_2$ = 10 : 300, at $200^{\circ}C$, 30 W, 0.5 Torr for 60 minutes, 2 cm $\times$ 2 cm size wafers were used. In consequence of comparing the results of lifetime measurement and sheet resistance relation, the laser condition set of 20 ~ 27 % of power, 150 ~ 160 kHz, 20 ~ 50 mm/s of marking speed, and $10\;{\sim}\;50 {\mu}m$ spacing with continuous wave mode of scanner lens showed the correlation between lifetime and sheet resistance as $100\;{\Omega}/sq$ and $11.8\;{\mu}s$ vs. $17\;{\Omega}/sq$ and $8.2\;{\mu}s$. Comparing to the singly deposited p-a-Si:H layer case, the additional ${\mu}c$-Si:H layer for doping resulted in no trade-offs, but showed slight improvement of both lifetime and sheet resistance, however sheet resistance might be confined by the additional intrinsic layer. This might come from the ineffective crystallization of amorphous silicon layer. For the additional layer case, lifetime and sheet resistance were measured as $84.8\;{\Omega}/sq$ and $11.09\;{\mu}s$ vs. $79.8\;{\Omega}/sq$ and $11.93\;{\mu}s$. The co-existence of $n^+$layeronthesamesurfaceandeliminating the laser damage should be taken into account for an IBC solar cell structure. Heavily doped uniform boron layer by fiber laser brings not only basic and essential conditions for the beginning step of IBC solar cell fabrication processes, but also the controllable doping concentration and depth that can be established according to the deposition conditions of layers.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.2
• /
• pp.228-233
• /
• 2004

Nowadays, the robot with various and complex functions is required. previous algorithms, however, cannot satisfy the requirement. In order to solve these problems, we introduce the 2-Layer Fuzzy Controller, which has a small number of fuzzy rules corresponding to various inputs and outputs. Also, it controls robustly and effectively an object. The main problem in the fuzzy controller is how to design the fuzzy rule. This paper designs the optimal 2-layer fuzzy controller using the Schema Co-Evolutionary Algorithm. The schema co-evolutionary algorithm can find more rapidly and excellently than simple genetic algorithm does.