• Korean Chemical Engineering Research
• /
• 제61권2호
• /
• pp.273-277
• /
• 2023

The biosorption of methylene blue (MB) from aqueous solution was investigated using dried Rhodotorula glutinis as the biosorbent. The effects of pH, initial dye concentration, biosorbent dosage, and kinetic studies were determined to obtain valuable information for biosorption. Results indicated that most of the adsorbed MB bound within 30 minutes of contact and the MB adsorption capacity increased from 21.1 to 101.8 mg/g with the initial MB concentration increased from 50 to 300 mg/L. Additionally, the MB adsorption capacity gradually increased from pH 4.0 to 9.0, reaching its peak at an initial pH of 9.0. As the biomass load was increased from 0.25 to 4.0 g/L, the MB removal efficiency increased from 14.1 to 84.5%. The Langmuir model provided the best fit throughout the concentration range, and the maximum adsorption capacity (q_max) and Langmuir constant (b) were determined to be 135.14 mg/g and 0.026 l/mg, respectively. Furthermore, the biosorbent process of R. glutinis was found to follow pseudo-second-order kinetics and the calculated q_eq,cal value showed good agreement with the experimental q_eq value. Overall, the biosorption of MB by R. glutinis can be characterized as a monolayer, single site type phenomenon, and the rate-limiting step was determined to be the chemical reaction between the adsorbent and the adsorbate.

• 전자공학회논문지
• /
• 제54권4호
• /
• pp.25-31
• /
• 2017

본 논문에서는 270/540/750/1500-Mb/s 동작속도를 갖는 영상신호 전송용 시리얼 송신기 칩을 $0.13-{\mu}m$ CMOS 공정을 이용하여 구현하였다. 전송 채널은 저가형 RG-58 계열의 5C-HFBT-RG6T 동축 케이블로서, 싱글 BNC 커넥터로 연결되어 있으며, 1.5-GHz 주파수에서 케이블 손실은 최대 45 dB이다. 이를 RLGC 모델링을 통해 SPICE용 회로로 구현하였고, 케이블 손실측정결과와 매우 유사한 특성을 갖는다. 신호감쇄의 보상은 송신기 회로의 프리앰퍼시스 기능 및 수신단의 이퀄라이저 기능을 통해 복원하며, 송신기 칩의 측정 결과 270-Mb/s, 540-Mb/s, 750-Mb/s 및 1.5-Gb/s 동작속도를 모두 만족하며, 프리앰퍼시스 기능을 OFF 했을 때에도 1.5 Gb/s에서 $370-mV_{pp}$ 출력전압을 갖는다. 칩의 전력소모는 1.2/3.3-V 전원전압으로부터 104 mW, 칩 면적은 I/O 패드를 포함하여 $1.65{\times}0.9mm^2$ 이다.

• 생명과학회지
• /
• 제15권5호
• /
• pp.802-808
• /
• 2005

사람의 Disabled-2 (Dab2)는 정상세포에서 c-Fos의 발현을 억제하여 세포 성장을 조절하는 암억제 유전자로 추정되어 지고 있다. 많은 암세포에서 Dab2는 유방과 난소의 정상세포에서는 발현이 되지만, 약 $85\%$의 유방과 난소의 종양세포에서는 발현이 줄어들거나, 발현이 억제되는 것으로 알려져 있다. 본 연구에서는 bisulfite 반응에 의한 염기서열 분석법과 MSP방법 등을 이용하여 유방암 세포주인 MDA MB-231세포에서 Dab2 유전자의 promoter상에 존재하는 Cpg island의 methylation된 상태를 분석하였다. 그 결과, 사람의 정상 자궁내막세포에서는 Dab2 promoter 부위가 완전하게 methylation되어 있지 않았다. 그러나 MDA MB-231세포에서는 TATA box 근처 의 CpG dinucleotide에서 비정상적으로 methylation되어 있었다. 이런 비정상적인 CpG dinucleotide의 methylation은 MDA MB-231세포를 5-azacytidine으로 처리하였을 때 methylation이 풀리고, Dab2의 발현이 회복되는 것으로 나타났다. 따라서 인간 유방암 세포주인 MBA MB-231세포에서 Dab2의 발현억제는 Dab2 유전자의 promoter부위의 CpG island의 비정상적인 methylation과 관련이 있는 것으로 여겨진다.

• 상하수도학회지
• /
• 제21권1호
• /
• pp.91-99
• /
• 2007

It is well-known that the presence of NOM (natural organic matter) in water has a negative effect on removing taste and odor compounds by activated carbon adsorption. Therefore, various means such as enhanced coagulation are applied to reduce the NOM. The presence of taste & odor compounds in drinking water even parts per trillion, is enough to generate customer dissatisfaction. Therefore, the aim of this study was to evaluate carbon usage rate (CUR) for conventional coagulation (CC) and enhanced coagulation (EC) in order to improve the efficiency of adsorption of taste and odor compounds. Also, Effect of CC and EC on molecular weight fraction and the early stage breakthrough of 2-MIB and Geosmin are evaluated. When the enhanced coagulation was adapted for pretreatment for activated carbon adsorption the operation period could be prolonged by 3.5~4 times. CUR for CC was about 2 times greater than CUR for EC and this means that EC has more adsorption capacity than CC. To analyze effect of EC and CC on breakthrough of 2-MIB quantitatively, adsorbed NOM mass was calculated based on unit mass of activated carbon. In the early stage breakthrough of 2-MIB, total adsorbed NOM was 23.72mg/g for CC and 34.56mg/g for EC. Therefore, it is shown that the early breakthrough term of 2-MIB and Geosmin was improved due to increased adsorbability. The low-molecular-weight NOM (500~2000Da) compounds were the most competitive, participating in direct competition with 2-MIB for adsorption site.

• 산업기술연구
• /
• 제37권1호
• /
• pp.21-26
• /
• 2017

This work experimentally determined the effect of combining of microwave irradiation and the Fenton process on decolorization of methylene blue ($C_{16}H_{18}N_3SCl$, MB). As [$H_2O_2$] increased from 2.65 to 4.41 mM, the decolorization of MB increased from 22.7 to 99.1%. As [$Fe^{2+}$] increased from 0.07 to 0.18 mM, the decolorization of MB increased from 24.0 to 98.5%. MB removal efficiencies were ${\geq}95%$ at $[H_2O_2]{\geq}3.5mM$ and $3.5{\leq}[H_2O_2]/[Fe^{2+}]{\leq}17.3$, but $[H_2O_2]/[Fe^{2+}]{\geq}20$ caused a decrease in MB removal. A two-stage kinetic model matched the experimental data well.

• Journal of Acupuncture Research
• /
• 제18권6호
• /
• pp.171-187
• /
• 2001

Objective : Moxibustion has been proved efficacious for many diseases, but isn't widespread in the clinics due to a danger of skin burning, the smoke produced while burning a moxa combustion and so on. Therefore, another type of moxa that can be resolved these troubles is required. To improve the effect of moxibustion and develop the new thermal stimulating treatment, the performance of commercial moxibustion widely used are studied systematically and found out quantitatively. Methods : We have selected two types (small-size moxa A(sMA), small-size moxa B (sMB)) among small-size moxaes used widely in the clinic. We examined combustion time, various temperatures, temperature gradient in each period during a combustion of moxa. Results : 1. The combustion time in the preheating period appeared somewhat longer in sMA than in sMB. 2, The combustion time in the heating period appeared longer in sMA by 26% than in sMB. 3. The average temperature in the heating period was $37.6{\sim}37.8^{\circ}C\;in\;sMA\;and\;36.2{\sim}36.8^{\circ}C$ in sMB and the maximum temperature measured at a center of contact surface in sMA was $48.6^{\circ}C$, higher by over $2.8^{\circ}C$ than that of sMB moxibustion. 4. The average ascending temperature gradient in the heating period was $0.08{\sim}0.1^{\circ}C/sec$ in both moxaes, and the average ascending temperature gradient of heating period in sMB appeared larger. The maximum ascending temperature gradient appeared higher in sMB, and the time reaching maximum ascending temperature gradient appeared much earlier in sMA than in sMB. 5. The combustion time in the retaining period was around 100 sec in sMA and around 275 sec in sMB. 6. The average temperature in the retaining period was $42.2{\sim}46.0^{\circ}C\;in\;sMA\;and\;39.3{\sim}41.4^{\circ}C/sec$ in sMB. The minimum temperature in the retaining period was over $38.80^{\circ}C$ in sMA but just $34.7^{\circ}C$ in sMB. 7. The average descending temperature gradient in sMA was $-0.050{\sim}0.067^{\circ}C/sec$ and in sMB was $-0.030{\sim}0.037^{\circ}C/sec$ 8. The combustion time in the cooling period appeared longer over two times in sMA than in sMB, and the time which the cooling period (minimum temperature) finished at appeared later in sMB by 55 sec. 9. We classified the combustion process that the measured temperature rose over body heat($37^{\circ}C$) into the effective combustion period. The effective combustion time was 233.3 sec in sMA and 300.4 sec in sMB respectively, and was longer by about 29% in sMB. The average temperature and maximum temperature in the effective combustion time appeared higher in sMA. The time taken until the maximum temperature was reached was 225.1 sec in sMA and 244.5 sec in sMB, faster by about 20 sec in sMA. The maximum ascending temperature gradient during the effective combustion period appeared larger about 1.4 times in sMB, but the time when the maximum ascending temperature gradient happened was faster in sMA. Conclusion : It appears that sMB, compared with sMA, is proper if necessary to apply the long time and weak stimulus, because of the gentle stimulus during the relatively longer time. In contrast, sMA that the symmetrical combustion happened is proper if necessary to apply the short time and strong stimulus.

• 대한토목학회논문집
• /
• 제37권2호
• /
• pp.475-483
• /
• 2017

녹조현상 발생시 남조류에 의하여 발생하는 이취미 물질인 Geosmin과 2-methylisoborneol(2-MIB)는 수돗물에 냄새를 유발하는 원인 물질로서 제거가 필요하다. 일반적으로 정수장에서는 이취미 물질의 제거를 위하여 활성탄을 사용하고 있으나 활성탄의 기공 분포와 활성탄의 입자크기가 이취미 물질 흡착제 미치는 영향에 대한 정보는 부족하다. 따라서, 본 연구에서는 다양한 활성탄의 기공분포와 활성탄의 입자 크기가 이 취미 물질 흡착에 미치는 영향을 살펴보았다. 분말활성탄(PAC), 입상활성탄(GAC), 활성탄소섬유(ACF)의 이취미 물질 흡착을 비교한 결과, PAC > ACF > GAC 순서로 이취미물질 흡착제거효율이 높았다. 다양한 기공분포 특성을 갖는 분말활성탄들을 비교한 결과, 미세기공이 잘발달된 경우가 Geosmin과 2-MIB의 흡착에 유리한 것으로 나타났으며, 입자 크기의 경우에는 작을수록 Geosmin과 2-MIB의 흡착에 보다 효과적이었다.

• 한국물환경학회지
• /
• 제27권1호
• /
• pp.104-109
• /
• 2011

The removal efficiencies of 2-methylisoborneol (MIB) and geosmin were investigated to reveal removal characteristics of typical organic compounds causing disagreeable taste and odor at the conventional water treatment plant installed with pulsator clarifier patented by the French company $Degr{\acute{e}}mont$. The injection rate of Powdered Activated Carbon (PAC) into water was changed step wisely as we conducted jar tests in the laboratory and water treatment in the actual plant. 2-MIB concentration decreased linearly while geosmin did exponentially along with the injection rate of PAC at our jar tests. The removal efficiency of geosmin by PAC injection was considerably higher than that of 2-MIB. In the real pulsator clarifier, 2-MIB concentration started decreasing as the injection rate reached up to 10 mg/L of PAC. On the other hand, the concentration of geosmin in water decreased proportional to the injection rate of PAC. In the sand filtration, removal efficiencies of 2-MIB and geosmin on July were much higher than those on March. It was carefully suggested beforehand and found afterwards that general microorganisms notably existed in the sand filter with no chlorine in filter influent and backwash water and the sand filter biologically activated removed much more odor compounds. It was considered as the reason why the removal efficiency of 2-MIB and geosmin was increased. The microbial activity maybe increased in summer with water temperature rising and low filtration rate possibly increased contact time between odor compounds and general microorganisms.

• Journal of Microbiology and Biotechnology
• /
• 제26권8호
• /
• pp.1420-1427
• /
• 2016

Geosmin and 2-methylisoborneol (2-MIB) are two of the most common taint compounds that adversely affect the quality of aquacultural animals. In the present study, 94% of geosmin and 97% of 2-MIB in suspended growth reactors producing bioflocs (SGRs) with aquaculture waste were removed after inoculation with Bacillus subtilis, significantly higher than that of control SGRs (70% of geosmin and 86.4% of 2-MIB). The lowest concentrations of geosmin and 2-MIB achieved in the effluent of the SGRs were 2.43 ± 0.42 ng/l and 2.23 ± 0.15 ng/l, respectively. The crude protein content of the bioflocs produced in the SGRs was 35 ± 4%. The NH₄⁺-N and NO₂^--N concentrations in the effluent of the reactors were 1.13 ± 0.21 mg/l and 0.42 ± 0.04 mg/l, respectively. These results suggest that inoculated with Bacillus subtilis, SGRs have a better performance to reuse the nitrogen in fish waste and to remove geosmin and 2-MIB from the culture water efficiently.

• 상하수도학회지
• /
• 제26권2호
• /
• pp.219-228
• /
• 2012

Problems due to the taste and odor in drinking water are common in treatment facilities around the world. Taste and odor are perceived by the public as the primary indicators of the safely and acceptability of drinking water, and are mainly caused by the presence of two semi-volatile compounds-2-methylisoborneol(2-MIB) and geosmin. Conventional treatment processes in water treatment plants, such as coagulation, sedimentation and chlorination have been found to be ineffective for the removal of 2-MIB and geosmin. Pulse UV system is a new UV irradiation system that is a non-mercury lamp-based alternative to currently used continuous wave systems for water disinfection. This study shows pulse UV system to be effective in treatment of these two compounds. Geosmin removal efficiency of UV process alone achieved approximately 70% at 10sec contact time. 2-MIB removal efficiency of UV only process achieved approximately 60% at 10sec contact time. The addition of $H_{2}O_{2}$ 7mg/L increased geosmin and 2-MIB removal efficiency upto approximately 94% and 91%, respectively.