• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.8
• /
• pp.938-945
• /
• 2005

The microstructure evolution in hot forging process is composed of dynamic recrystallization during deformation as well as grain growth during dwell time. Therefore, the control of forging parameters such as strain, strain rate. temperature and holding time is important because the microstructure change in hot working affects the mechanical properties. Modeling equations are developed to represent the flow curve. grain size. recrystallized volume fraction and grain growth phenomena by various tests. The developed modeling equations were combined with thermo-viscoplastic finite element modeling to predict the microstructure change evolution during hot forging process. The large exhaust valve spindle (head diameter of 512mm) was simulated by closed die forging with hydraulic press and cooled in air after forging. The preform was heated to each 1080 and 1150$^{\circ}C$. Numerical calculation was performed by DEFORM-2D. a commercial finite element code. Heat transfer can be coupled with the deformation analysis in a non-isothermal deformation analysis. In order to obtain the fine and homogeneous microstructure and good mechanical properties in forging. the FEM would become a useful tool in the simulation of the microstructure development. In forging, appropriate temperature, strain and strain rate and rapid cooling are required to obtain the fine grain microstructure The optimal forging temperature and effective strain range of Nimonic 80A for large exhaust valve spindle are about 1080$\∼$l120$^{\circ}C$ and 150$\∼$200$\%$.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2185-2189
• /
• 2010

Closely arranged CdSe and Zn doped CdSe vertical nanorod bundles were grown directly on FTO coated glass by using electrodeposition method. Structural analysis by XRD showed the hexagonal phase without any precipitates related to Zn. FE-SEM image showed end capped vertically aligned nanorods arranged closely. From the UV-vis transmittance spectra, band gap energy was found to vary between 1.94 and 1.98 eV due to the incorporation of Zn. Solar cell parameters were obtained by assembling photoelectrochemical cells using CdSe and CdSe:Zn photoanodes, Pt cathode and polysulfide (1M $Na_2S$ + 1M S + 1M NaOH) electrolyte. The efficiency was found to increase from 0.16 to 0.22 upon Zn doping. Electrochemical impedance spectra (EIS) indicate that the charge-transfer resistance on the FTO/CdSe/polysulfide interface was greater than on FTO/CdSe:Zn/polysulfide. Cyclic voltammetry results also indicate that the FTO/CdSe:Zn/polysulfide showed higher activity towards polysulfide redox reaction than that of FTO/CdSe/polysulfide.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.3
• /
• pp.233-244
• /
• 2008

In this study, the antioxidative effects, inhibitory effects on elastase and tyrosinase, and component analysis of Psidium guajava leaf extracts were investigated. The free radical (1,1-diphenyl-2-picrylhydrazyl, DPPH) scavenging activities $(FSC_{50})$ of extract/fractions of Psidium guajava leaf were in the order: 50% ethanol extract $(7.05{\mu}g/mL)$ < ethyl acetate fraction $(3.36{\mu}g/mL)$ < deglycosylated flavonoid aglycone fraction $(3.24{\mu}g/mL)$. Reactive oxygen species (ROS) scavenging activities $(OSC_{50})$ of some Psidium guajava leaf extracts on ROS generated in $Fe^{3+}-EDTA/H_2O_2$ system were investigated using the luminol-dependent chemiluminescence assay. The order of ROS scavenging activities were 50% ethanol extract $(OSC_{50},\;2.17{\mu}g/mL)$ < ethyl acetate fraction $(0.64{\mu}g/mL)$ < deglycosylated flavonoid aglycone fraction $(3.39{\mu}g/mL)$. Aglycone fraction showed the most prominent ROS scavenging activity. The protective effects of extract/fractions of Psidium guajava leaf on the rose-bengal sensitized photohemolysis of human erythrocytes were investigated. The Psidium guajava leaf extracts suppressed photohemolysis in a concentration dependent manner $(1{\sim}10{\mu}g/mL)$, particularly deglycosylated flavonoid aglycone fraction exhibited the most prominent celluar protective effect ${\tau}_{50}\;107.5min\;at\;1{\mu}g/mL)$. Aglycone fraction obtained from the deglycosylation reaction of ethyl acetate fraction among the Psidium guajava leaf extracts, showed 1 band in TLC and 1 peak in HPLC experiments (360 nm). One component was identified as quercetin. TLC chromatogram of ethyl acetate fraction of Psidium guajava leaf extract revealed 5 bands and HPLC chromatogram showed 5 peaks, which were identified as quercetin 3-O-gentobioside (10.32%) , quercetin 3-O-${\beta}$-D-glucoside (isoquercitin, 13.30%), quercetin 3-O-${\beta}$-D-galactoside (hyperin, 11.34%), quercetin 3-O-${\alpha}$-L-arabinoside (guajavarin, 19.70%), quercetin 3-O-${\beta}$-L-rhamnoside (quercitrin, 45.33%) in the order of elution time. The inhibitory effect of Psidium guajava leaf extracts on tyrosinase were investigated to assess their whitening efficacy. Finally, their anti-elastase activities were measured to predict the anti-wrinkle efficacy in the human skin. Inhibitory effects $(IC_{50})$ on tyrosinase of some Psidium guajava leaf extracts was 50% ethanol extract $(149.67{\mu}g/mL)$ < ethylacetate fraction $(30.67{\mu}g/mL)$ < deglycosylated aglycone fraction $(17.10{\mu}g/mL)$. Inhibitory effects $(IC_{50})$ on elastase of some Psidium guajava leaf extracts was 50% ethanol extract $(6.60{\mu}g/mL)$ < deglycosylated aglycone fraction $(5.66{\mu}g/mL)$ < ethylacetate fraction $(3.44{\mu}g/mL)$. These results indicate that extract/fractions of Psidium guajava leaf can function as antioxidants in bioloigcal systems, particularly skin exposed to UV radiation by scavenging $^1O_2$ and other ROS, and protect cellular membranes against ROS. And component analysis of Psidium guajava leaf extract and inhibitory activity on elastase of the aglycone fraction could be applicable to new functional cosmetics for smoothing wrinkles.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.156-156
• /
• 2016

The effect of nitrogen doping on the mechanical and tribological performance of single-layer tetrahedral amorphous carbon (ta-C:N) coatings of up to $1{\mu}m$ in thickness was investigated using a custom-made filtered cathode vacuum arc (FCVA). The results obtained revealed that the hardness of the coatings decreased from $65{\pm}4.8GPa$ to $25{\pm}2.4GPa$ with increasing nitrogen gas ratio, which indicates that nitrogen doping occurs through substitution in the $sp^2$ phase. Subsequent AES analysis showed that the N/C ratio in the ta-C:N thick-film coatings ranged from 0.03 to 0.29 and increased with the nitrogen flow rate. Variation in the G-peak positions and I(D)/I(G) ratio exhibit a similar trend. It is concluded from these results that micron-thick ta-C:N films have the potential to be used in a wide range of functional coating applications in electronics. To achieve highly conductive and wear-resistant coatings in system components, the friction and wear performances of the coating were investigated. The tribological behavior of the coating was investigated by sliding an SUJ2 ball over the coating in a ball-on-disk tribo-meter. The experimental results revealed that doping using a high nitrogen gas flow rate improved the wear resistance of the coating, while a low flow rate of 0-10 sccm increased the coefficient of friction (CoF) and wear rate through the generation of hematite (${\alpha}-Fe_2O_3$) phases by tribo-chemical reaction. However, the CoF and wear rate dramatically decreased when the nitrogen flow rate was increased to 30-40 sccm, due to the nitrogen inducing phase transformation that produced a graphite-like structure in the coating. The widths of the wear track and wear scar were also observed to decrease with increasing nitrogen flow rate. Moreover, the G-peaks of the wear scar around the SUJ2 ball on the worn surface increased with increasing nitrogen doping.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.4
• /
• pp.272-282
• /
• 2022

The essential oil extracted from Citrus × natsudaidai (Yu. Tanaka) Hayata peels is known to have various biological properties. However, the chemical composition of essential oil is influenced by the ripening stages of fruits, which then affects related biological activities. This study investigates the antioxidant activities of essential oils extracted from Citrus × natsudaidai peels at different ripening stages (immature, mature, and overripe). The essential oils were extracted using the hydro-distillation method. As a result of gas chromatography-mass spectrometry (GC-MS) analysis, d-limonene was dominant and was increased as matured. However, 𝛄-terpinene was decreased. The antioxidant properties and their total phenolic content (TPC) were influenced by the ripening stages. The TPC was highest in the immature stage of essential oil (1,011.25 ± 57.15 mg GAE/100 g). 2,2-Diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity was excellent in the immature stage (EC₅₀ = 15.91 ± 0.38 mg/mL). 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging activity was superior in overripe stage (EC₅₀ = 20.43 ± 0.37 mg/mL). The antioxidant activity measured using ferric reducing antioxidant power (FRAP) assay showed higher values for the essential oils in immaturity (1,342.37 ± 71.07 mg Fe²⁺/100 g). Comprehensively, the essential oil in the immature stage showed the best antioxidant activity. Finally, knowing the chemical composition and antioxidant activity at different ripening stages will provide data for selecting the right fruit.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.299-309
• /
• 2006

Railway noise and vibration has been recognized as major problems with the speed-up of rolling stock. As a kind of solution to these problems, the decrease of stiffness of track pad have been tried. However, in this case, overturning of rail due to lateral force should be considered because it can have effect on the safety of running train. Therefore, above two things - decrease of stiffness of track pad and overturning of rail due to lateral force - should be considered simultaneously for the appropriate determination of spring coefficient of track pad. With this viewpoint, minimum spring coefficient of track pad is estimated through the comparison between the theoretical relationship about the overturning of rail and 3-dimensional FE analysis result. Two kinds of Lateral force and wheel load are used as input loads. Extracted values from the conventional estimation formula and the Shinkansen design loads are used. It is found that the overturning of rail changes corresponding to the change of the stiffness of track pad and the ratio of lateral force to wheel load. Moreover, it is found that the analysis model can have influence on the results. Through these procedure, minimum spring coefficient of track pad is estimated.

• Korean Journal of Agricultural Science
• /
• v.38 no.1
• /
• pp.17-23
• /
• 2011

This research was conducted to investigate the influence of application rate of liming fertilizers on changes in soil chemical properties and growth of 'Red Madness' petunia in plug production. To achieve this, dolomite (DO) with 0, 1.0, 3.5, 8.0 or 13.0 $g{\cdot}L^{-1}$ and calcium carbonate (CC) with 0, 2.0, 2.5, 3.0, 3.5, or 4.0 $g{\cdot}L^{-1}$ were incorporated into peatmoss + vermiculite (1:1, v/v) during the root substrates formulation. The treatments of 3.5 $g{\cdot}L^{-1}$ of DO and 2.5 or 3.0 $gL^{-1}$ of CC had acceptable ranges of pH and EC in soil solution such as 5.6~6.2 and 0.7~1.0 $dS{\cdot}m^{-1}$, respectively. The faster rising of pH was observed in root media containing CC rather than those of DO. This indicates that the solubility of CC is higher than DO. The soil Ca concentrations in all treatments of CC were 1.8 times as high as those of DO. The treatments of 3.5 or 8.0 $g{\cdot}L^{-1}$ of DO had the highest soil Mg concentrations, but all treatments of CC had lower soil Mg concentrations than control treatment indicating that additional application of Mg fertilizers are required. The elevated application rate of DO or CC resulted in the increase of fresh and dry weight. But plant heights were not influenced by application of liming fertilizers. The results of tissue analysis showed that application of DO or CC influenced the $PO_4{^-}P$, Ca and Mg contents, but not influenced the contents of other nutrients such as N, P, Fe, Mn, Zn and Cu.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.65.2-65.2
• /
• 2010

We present four new transits of the planetary system TrES-3 observed between 2009 May and 2010 June. Among those, the third transit by itself indicates possible evidence for brightness disturbance, which could originate from a starspot or an overlapping double transit. A total of 107 transit times, including our measurements, were used to determine the improved ephemeris with a transit epoch of $2454185.910950\pm0.000073$ HJED (Heliocentric Julian Ephemeris Date) and an orbital period of $1.30618698\pm0.00000016$ d. We analyzed the transit light curves using the JKTEBOP code and adopting the quadratic limb-darkening law. In order to derive the physical properties of the TrES-3 system, the transit parameters are combined with the empirical relations from eclipsing binary stars and stellar evolutionary models, respectively. The stellar mass and radius obtained from a calibration using $T_{eff}$, log $\rho$ and [Fe/H] are in good agreement with those from the isochrone analysis within the uncertainties. We found that the exoplanet TrES-3b has a mass of $1.93\pm0.07\;M_{Jup}$, a radius of $1.30\pm0.04\;R_{Jup}$, a surface gravity of $28.2\pm1.1\;m\;s^{-1}$, a density of $0.82\pm0.06\;\rho_{Jup}$, and an equilibrium temperature of $1641\pm23K$.

• Particle and aerosol research
• /
• v.8 no.2
• /
• pp.89-95
• /
• 2012

Spherical mesoporous silica particles, of which main pore diameter was 3.8 nm, were successfully prepared by spray pyrolysis from aqueous silicic acid. The effect of precursor concentration, reaction temperature, and the addition of urea and PEG on the particle diameter and pore properties such as pore diameter, total pore volume, and specific surface area were investigated by using FE-SEM, particle size analyzer, and nitrogen absorption-desorption analysis. With an increase of the precursor concentration from 0.2 M to 0.7 M, the average particle diameter, total pore volume, and specific surface area of the porous silica particles increased from 0.56 to $0.96\;{\mu}m$, 0.434 to $0.486\;cm^3/g$, 467.8 to $610.4\;m^2/g$, respectively. Within the temperature range $(600\;^{\circ}C{\sim}800\;^{\circ}C)$, there was no significant difference in the pore diameter, total pore volume, and specific surface area. In addition, the addition of urea as an expansion aid led to slight increases in particle diameter, pore diameter, and specific surface area. However, when the polyethylene glycol (PEG) as an organic template was used, the total pore volume of porous particles increased dramatically.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.1
• /
• pp.57-65
• /
• 2012

In the present study, the antioxidative properties, inhibitory activity on tyrosinase, and active components of Eriobotrya japonica (E. japonica) leaf extract were investigated. The free radical (1,1-diphenyl-2-picrylhydrazyl, DPPH) scavenging activity ($FSC_{50}$) of extract/fraction of E. japonica leaf was in the order 50 % ethanol extract ($22.625{\mu}g/mL$) < ethyl acetate fraction (6.75) < deglycosylated aglycone fraction (5.06). Reactive oxygen species (ROS) scavenging activities ($OSC_{50}$) of fraction/extracton ROS generated in $Fe^{3+}-EDTA/H_2O_2$ system using the luminol-dependent chemiluminescenceassay were investigated. $OSC_{50}$ of the ethyl acetate fraction, deglycosylated aglycone fraction, and ethanol extract were 0.75, 0.79, and $1.61{\mu}g/mL$, respectively. The cellular protective effects of E. japonica leaf extract on the rose-bengal sensitized photohemolysis of human erythrocytes were investigated. The protective effects of extract/fraction of E. japonica leaf were increased in a in a concentration dependent manner ($5{\sim}50{\mu}g/mL$). Especially, ${\tau}50$ of ethyl acetate fraction at concentrations of $10{\mu}g/mL$ and $50{\mu}g/mL$ showed the most protective effects at 390.8 min and 1471.5 min. The inhibitory effect ($IC_50$) on tyrosinase of E. japonica leaf extracts was higher than arbutin, known as a skin-whitening agent. The order of inhibitory effects was acetate fraction ($75.25{\mu}g/mL$) < 50 % extract (74.1) < deglycosylated aglycone fraction (43.35). TLC of the ethyl acetate fraction showed 7 bands (EJL 1 - EJL 7). HPLC of the aglycone fraction exhibited 2 peaks, kaempferol and quercetin. The amounts of kaempferol and quercetin were 53.7 and 46.3 %. respectively. Therefore, The amounts of kaempferol and its glucoside were a little bit higher than quercetin and its glucoside in E. japonica leaf extract. Accordingly, these findings suggest that extracts/fractions of E. japonica leaf can function as antioxidants in biological systems, especially skin exposed to UV radiation, and protect cellular membranes against ROS. Thus, the extract/fraction of E. japonica leaf may be used in novel functional cosmetics as antioxidants against skin photoaging.