• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.73-79
• /
• 1999

Semiconductor optical switch modules of 1$\times$2, 1$\times$4, and 4$\times$4 types for 1550 nm optical communication systems were fabricated by using laser welding technique, embodying in 30-pin butterfly package. For better coupling efficiency between switch chip and optical fiber, tapered fibers of 10~15mm lens radii were used, which provided up to 60% optical coupling efficiency. With the help of new laser hammering process, we could recover the lost optical power almost completely up to average 82% of initially obtained power. The fabricated optical switch modules showed good thermal stability of less than 5% degradation even after 200 times thermal cycling test. The 2.5 Gbps optical transmission characteristics of the 4$\times$4 switch module showed low sensitivities of less than -30dB for all possible switching paths. The transmission penalties of 1$\times$2 switch module at $10^{-10}$ BER were 0.6dB and 0.7dB for 50Xm and 90 Km optical fibers, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1922-1931
• /
• 1999

A multicast traffic’s feature is the function of providing a point to multipoints cell transmission, which is emerging from the main function of ATM switch. However, when a conventional point-to-point switch executes a multicast function, the excess load is occurred because unicast cell as well as multicast cell passed the copy network. Additionally, due to the excess load, multicast cells collide with other cells in a switch. Thus a deadlock that losses cells raises, extremely diminishes the performance of switch. An input queued switch also has a defect of the HOL (Head of Line) blocking that less lessens the performance of the switch. In the proposed multicast switch, we use shared memory switch to reduce HOL blocking and deadlock. In order to decrease switch’s complexity and cell's processing time, to improve a throughput, we utilize the method that routes a cell on a separated paths by traffic pattern and the scheduling algorithm that processes a maximum 2N cell at once in the control part. Besides, when cells is congested at an output port, a cell loss probability increases. Thus we use the Output Memory (OM) to reduce the cell loss probability. And we make use of the method that stores the assigned memory (UM, MM) with a cell by a traffic pattern and clears the cell of the Output memory after a fixed saving time to improve the memory utilization rate. The performance of the proposed switch is executed and compared with the conventional policy under the burst traffic condition through both the analysis based on Markov chain and simulation.

• Journal of KIISE:Information Networking
• /
• v.32 no.2
• /
• pp.244-253
• /
• 2005

In this paper, a performance evaluation model of the switch router with the multiple-buffered crossbar switches is proposed and examined. Buffered switch technique is well known to solve the data collision problem of the crossbar switch. The proposed evaluation model is developed by investigating the transfer patterns of data packets in a switch with output-buffers. The performance of the multiple-buffered crossbar switch is analyzed. Steady state probability concept is used to simplify the analyzing processes. Two important parameters of the network performance, throughput and delay, are then evaluated. To validate the proposed analysis model, the simulation is carried out on a network that uses the multiple buffered crossbar switches. Less than $2\%$ differences between analysis and simulation results are observed. It is also shown that the network performance is significantly improved when the small number of buffer spaces is given. However, the throughput elevation is getting reduced and network delay becomes increasing as more buffer spaces are added in a switch.

• Health Policy and Management
• /
• v.23 no.2
• /
• pp.112-123
• /
• 2013

Background: Under the risk of financial sustainability of National Health Insurance, Korean government attempted a series of regulations over pharmaceutical prices. The first price-cut was implemented to the hyperlipidemial treatments, and the prices of statins were reduced on 15th, April in 2009. The purposes of this study are 1) to investigate the impact of this price-cut on pharmaceutical expenditure, and 2) to identify the factors associated with drug-switch among statins. Methods: Using the national patients sample data, this study conducted time series analysis on the expenditures, prices, and volumes of statin drugs. To understand the factors associated with drug-switch, the multinomial logit model was analyzed at the patients level. Results: The results of time series analysis demonstrated that the price-cut of hyperlipidemic medicines did not lead to the reduced expenditure, suggesting the increased volume was the major cause. The multinomial logit analysis identified the switch of healthcare provider as the significant factor that was highly associated with drug-switch, implying the physicians' preference was the major motivation of drug-switch. Conclusion: Without control of utilization, price regulation itself could not reduce pharmaceutical expenditure. This suggests that the pharmaceutical regulations should be implemented on the basis of understanding of provider behaviors. The findings of this study will form the first step for further empirical studies.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.5
• /
• pp.261-269
• /
• 2016

A high-performance transmit/receive (T/R) switch is essential for every radio-frequency (RF) device. This paper proposes a T/R switch that is designed in the CEDEC 0.13 μm complementary metal-oxide-semiconductor (CMOS) technology for 2.4 GHz ISM-band RF applications. The switch exhibits a 1 dB insertion loss, a 28.6 dB isolation, and a 35.8 dBm power-handling capacity in the transmit mode; meanwhile, for the 1.8 V/0 V control voltages, a 1.1 dB insertion loss and a 19.4 dB isolation were exhibited with an extremely-low power dissipation of 377.14 μW in the receive mode. Besides, the variations of the insertion loss and the isolation of the switch for a temperature change from - 25℃ to 125℃ are 0.019 dB and 0.095 dB, respectively. To obtain a lucrative performance, an active inductor-based resonant circuit, body floating, a transistor W/L optimization, and an isolated CMOS structure were adopted for the switch design. Further, due to the avoidance of bulky inductors and capacitors, a very small chip size of 0.0207 mm² that is the lowest-ever reported chip area for this frequency band was achieved.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.946-949
• /
• 2001

This paper proposes a new zero-current switching (ZCS) pulse-width modulation (PWM) switch cell that has no additional conduction loss of the main switch. In this cell, the main switch and the auxiliary switch turn on and turn off under zero current condition. The diodes commutate softly and the reverse recovery problems are alleviated. The conduction loss and the current stress of the main switch are minimized, since the resonating current for the soft switching does not flow through the main switch. Based on the proposed ZCS PWM switch cell, a new family of dc to dc PWM converters is derived. The new family of ZCS PWM converters is suitable for the high power applications employing IGBTs. Among the new family of dc to dc PWM converters, a boost converter was taken as an example and has been analyzed. Design guidelines with a design example are described and verified by experimental results from the 2.5 kW prototype boost converter operating at 40kHz.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.1
• /
• pp.21-24
• /
• 2005

The problem of fluctuation-induced digital errors in a rapid single flux quantum (RSFQ) circuit has been very important issue. So in this experiment, we calculated error rate of RSFQ switch in superconductiyity ALU, The RSFQ switch should have a very low error rate in the optimal bias. We prepared two circuits Placed in parallel. One was a 10 Josephson transmission lines (JTLs) connected in series, and the other was the same circuit but with an RSFQ switch placed in the middle of the 10 JTLs. We used a splitter to feed the same input signal to the both circuits. The outputs of the two circuits were compared with an RSFQ XOR to measure the error rate of the RSFQ switch. By using a computerized bit error rate test setup, we measured the bit error rate of 2.18$\times$$10^{12}$ when the bias to the RSFQ switch was 0.398mh that was quite off from the optimum bias of 0.6mA.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.67-70
• /
• 2006

This paper deals with a single crystalline silicon (SCS) RF MEMS switch for telecommunication system applications. The proposed SCS switch was fabricated using a silicon-on-glass (SiOG) process and its performances in terms of RF responses, switching time, lifetime were characterized. The proposed SCS switch consists of movable plates, mechanical spring structures, which are composed of robust SCS, resulting in mechanically good stability, The measured actuation voltage was 30 V, and with this applied voltage, the insertion loss and isolation characteristics were measured to be 0.05 and 44.6 dB at 2 GHz respectively. The measured switch ON and OFF time were 13 and $9{\mu}s$, respectively. The lifetime of the fabricated switch was tested. Even after over 1 billion cycles repeated ON/OFF actuations, the switch maintained its own characteristics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.710-713
• /
• 2004

The design, simulation, modeling and measurement of a low temperature co-fired ceramic (LTCC) RF switch module for GSM applications is presented in this paper. RF switch module is constructed using a Rx/Tx switching circuit and integrated low pass filter. The low pass filter function was designed to operate in th GSM band. Insertion and return loss of the low pass filter were designed less than 0.3 dB and better than 12.7 dB at 900 MHz. The RF switch module contained 10 embedded passives and 3 surface mount components integrated on $4.6{\times}4.8{\times}1.2$ nm, 6-layer multi-layer integrated circuit. The insertion loss of switch module was measured at 900 MHz was 11 dB.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.154-155
• /
• 2000

Optical switches using MEMS(Micro Electro Mechanical Systems) process have been widely developed since conventional optical switches cannot meet the requirements of new systems. $N_2$ type micro-mirror switches are easy to control, have simple optical systems but have difficulties in expanding the ports. Micromirrors of 2N type switches must be tilted at various angles and have relatively complicated optical systems but have advantage in expanding ports. Another type of optical switch using MEMS process is micro-waveguide type. It is reliable than other types since it has no moving parts.