• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.97-103
• /
• 2010

In this paper, we present an efficient design scheme based on analysis of design requirements and considerations of baseband packet switch for S-band satellite/terrestrial hybrid multi-beam satellite communication systems. To establish design requirements and considerations, we analyze required functions of baseband packet switch, specifications of multi-beam satellite communications, communication services and performance requirements. And also we analyze and compare conventional layer-2 and layer-3 satellite baseband packet switching techniques, packet switching protocols and packet switch architectures, to apply from analyzed results. Finally, we propose a hardware design scheme of MPEG based layer-2 baseband packet switch using analyzed results.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.51-56
• /
• 2004

We propose and fabricate an 1${\times}$2 asymmetric optical switch by TOE using SOI wafer based on silicon which has very large TOE figure and it is a good material for optical devices. SOI wafer consists of 3 layers; upper Si layer for device(waveguide;core, n=3.5), buried oxide layer for insulator(clad, n=1.5) and Si substrate layer. We designed 1${\times}$2 asymmetric y-branched single mode optical waveguide switch by BPM simulation and metal heater by heat transfer simulation. Fabricated switch shows about 3.5 watts of power consumption and over 20dB of crosstalk between output channels.

• Journal of Magnetics
• /
• v.16 no.3
• /
• pp.234-239
• /
• 2011

Transcranial magnetic stimulation utilizes the method of controlling applied time and changing pulse by output pulse through power density control for diagnosis purposes. Transcranial magnetic stimulation can also be used in cases where diagnosis and treatment are difficult since output pulse shape can be changed. As intensity, pulse range, and pulse shape of the stimulation pulse must be changed according to lesion, the existing sine wave-shaped stimulation treatment pulse poses limitations in achieving various treatments and diagnosis. This study actualized a new method of transcranial magnetic stimulation that applies a 3 Stage 2 Switch( power semiconductor 2EA) for controlling pulse repetition rate by achieving numerous switching control of stimulation coil. Intensity, pulse range, and pulse shape of output can be freely changed to transform various treatment pulses in order to overcome limitations in stimulation treatment presented by the previous sine wave pulse shape. The method of freely changing pulse range by using 3 Stage 2 Switch discharge method is proposed. Pulse shape, composed of various pulse ranges, was created by grafting PFN (Pulsed Forming Network) through AVR AT80S8535 one-chip microprocessor technology, and application in transcranial magnetic stimulation was achieved to study the output characteristics of stimulation treatment pulse according to delaying time of the trigger signal applied in section switch.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.989-994
• /
• 2005

A MMIC(Monolithic Microwave Integrated Circuit) switch chip using InGaAs/GaAs p-HEMT process has been designed for MSM(Microwave Switch Matrix) of satellite communication system. An absorptive type MMIC switch is adopted for good reflection coefficients performances of input and output ports at both on and off states. And, a quarter wavelength impedance transformer is realized with lumped elements of MIM capacitor and spiral inductor for 3 GHz band to reduce the chip size. This MMIC switch covers the frequency range of $3.2\~3.6\;GHz$. According to the on-wafer measurement, the fabricated MMIC switch with miniature size of $1.6\;mm{\times}1.3\;mm$ demonstrates insertion loss below 2 dB and isolation above 56.8 dB, and the performance coincides with simulation results.

• International Journal of Human Ecology
• /
• v.12 no.2
• /
• pp.1-12
• /
• 2011

Many pharmaceutical products are available through prescription (Rx) only status. As a result, access to physicians and insurance coverage play a key role in the use of these products, and therefore may affect the population to whom advertising is targeted at. The movement of pharmaceutical products from prescription (Rx) to Over-the-Counter (OTC), or Rx-to-OTC switch changes the cost of acquiring the drug and therefore may change the incentives manufacturers have at targeting particular population segments. This study examines whether Rx-to-OTC switch changes the frequency and the distribution of who is exposed to pharmaceutical advertising. Using an archive of pharmaceutical advertisements and National Consumer Survey, this study examines how individuals with particular demographic characteristics are exposed to pharmaceutical advertisements before and after drugs are moved from Rx to OTC. The results provide evidence that individual's advertising exposure increases after Rx-to-OTC switch. Moreover, the increase in advertising exposure is greater for the low socioeconomic status (SES) consumers which implies they may get more information about the disease, treatment and product after the Rx-to-OTC switch through advertising. If low SES consumers have more exposure to the advertising after products switched to OTC, then FDA policies regulating this switch should recognize the potential role of advertising providing access to health-related information.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.205-208
• /
• 2002

An existing ATM switch fabric uses VPI(Virtual Path Identifier) and VCI(Virtual Channel Identifier) information to route ATM cell. But AAL type 2 switch which efficiently processes delay-sensitive, low bit-rate data such as a voice routes the ATM cell by using CID(Channel Identification) field in addition to VPI and VCI. In this paper, we research the AAL type 2 switch that performs the process of CPS packet. The Receive unit extracts the CPS packet from the inputted ATM cell. The designed receive unit consists of input FIFO, r)( status table, CAM(Content Addressable Memory), new CID table and partial packet memory. Also the designed receive unit supports the PCI interface with host processor. The receive unit is implemented in Xilinx FPGA and operates at 72MHz.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.247-251
• /
• 1998

This work presents the analysis of $1\times2$ polymer waveguide thermo-optic switch using asymmetric Y-splitter at the wavelength of 1300nm. Because of the high thermo-optic coefficient of polymeric materials the design of efficient switches were feasible. For the numerical simulation of these switches the finite difference beam propagation method has been employed. Design rules for a $1\times2$ polymeric switch have been defined by using the numerical techniques.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.2
• /
• pp.263-266
• /
• 2007

We report a nickel optical MEMS switch, being able to rotate through a large angle and to accommodate multiple channels. The proposed optical switch consists of a thin nickel mirror and two torsion springs supporting the mirror. The torsion springs are designed using a finite element method (FEM) such that plastic deformation of the thin nickel is avoided during the large torsion actuation. For switching speed improvement, transient vibration of the released mirror is suppressed by optimizing the mirror design and a fast switching response of $200\;{\mu}s\;(pull-down)/300\;{\mu}s\;(pull-up)$ is demonstrated.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.57-62
• /
• 2005

This paper describes the design of a high performance microwave single pole double throw (SPDT) monolithic microwave integrated circuit switch using GaAs pHEMT process. The switch design proposes a novel coplanar waveguide (CPW) impedance transform network which results in the low insertion loss and high isolation by compensating for the FET parasitics to get the low on-resistance and low off-capacitance. The proposed switch has the measured isolation of better than 24 dB and insertion loss of less than 2.6 dB from 53 to 61 GHz. The chip is fabricated with the size of 2.2mm $\times$ 1.6 mm.

• Journal of Life Science
• /
• v.27 no.11
• /
• pp.1245-1255
• /
• 2017

Most cancer cells produce ATP predominantly through glycolysis instead of through mitochondrial oxidative phosphorylation, even in the presence of oxygen. The phenomenon is termed the Warburg effect, or the glycolytic switch, and it is thought to increase the availability of biosynthetic precursors for cell proliferation. EMTs have critical roles in the initiation of the invasion and metastasis of cancer cells. The glycolytic switch and EMT are important for tumor development and progression; however, their correlation with tumor progression is largely unknown. The Snail transcription factor is a major factor involved in EMT. The Snail expression is regulated by distal-less homeobox 2 (Dlx-2), a homeodomain transcription factor that is involved in embryonic and tumor development. The Dlx-2/Snail cascade is involved in Wnt-induced EMTs and the glycolytic switch. This study showed that in response to Wnt signaling, the Dlx-2/Snail cascade induces the expression of PFKFB2, which is a glycolytic enzyme that synthesizes and degrades fructose 2, 6-bisphosphate (F2,6BP). It also showed that PFKFB2 shRNA prevents Wnt-induced EMTs in the breast-tumor cell line MCF-7. The prevention indicated that glycolysis is linked to Wnt-induced EMT. Additionally, this study showed PFKFB2 shRNA suppresses in vivo tumor metastasis and growth. Finally, it showed the PFKFB2 expression is higher in breast, colon and ovarian cancer tissues than in matched normal tissues regardless of the cancers' stages. The results demonstrated that PFKFB2 is an important regulator of EMTs and metastases induced by the Wnt, Dlx-2 and Snail factors.