• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.157-164
• /
• 2013

In the presence of spoofing signal the GPS signal having the same PRN with the spoofer is hard to be acquired since the power of spoofing signal is usually stronger than that of GPS signal. If a spoofing signal exists for the same PRN, there are double peaks in two-dimensional space of frequency and code phase in acquisition stage. Using double peak information it is possible to detect spoofing signal and acquire GPS information through separate channel tracking. In this paper we introduce an anti-spoofing method using double peak detection, and thus can acquire GPS navigation data after two-channel tracking for the same PRN as the spoofing signal.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.285-293
• /
• 2014

Two-dimensional PDF417 bar code has a wide range of use and has a storage capacity to compress a large amount of data. With these characteristics, PDF417 has been used in various ways to prevent the forgery and alteration of important information in documents. On the other hand, previous decoding methods in PDF417 barcode are slow and inefficient because they simply employ the standard specifications of AIM (Association for Automatic Identification and Mobility). Therefore, this paper propose an efficient and fast algorithm of decoding PDF417 bar code. As a result, the proposed decoding algorithm will be more faster and efficient than previous methods.

• Tunnel and Underground Space
• /
• v.19 no.2
• /
• pp.158-166
• /
• 2009

As a basic study for investigating the development of the stress-induced crack in Hoek-Brown rock, a homogenization technique of elastic cracks is proposed. The onset of crack is monitored by Hoek-Brown empirical criterion, while the orientation of the crack is determined by the critical plane approach. The concept of volume averaging in stress and strain component was invoked to homogenize the representative rock volume which consists of intact rock and cracks. The formulation results in the constitutive relations for the homogenized equivalent anisotropic material. The homogenization model was implemented in the standard FEM code COSMOSM. The numerical uniaxial tests were performed under plane strain condition to check the validity of the propose numerical model. The effect of friction between the loading plate and the rock sample on the mode of deformation and fracturing was examined by assuming two different contact conditions. The numerical simulation revealed that the homogenized model is able to capture the salient features of deformation and fracturing which are observed commonly in the uniaxial compression test.

• Tunnel and Underground Space
• /
• v.14 no.1
• /
• pp.54-68
• /
• 2004

In this study, scaled model tests were performed on blasting demolition of reinforced concrete structures and the experimental results were analyzed in comparison with the results of numerical analysis. The tests were designed to induce a progressive collapse, and physical properties of the scaled model were determined using scale factors obtained ken dimension analysis. The scaled model structure was made of a mixture of plaster, sand and water at the ratio determined to yield the best scaled-down strength. Lead wire was used as a substitute for reinforcing bars. The scaled length was at the ratio of 1/10. Selecting the material and scaled factors was aimed at obtaining appropriately scaled-down strength. PFC2D (Particle Flow Code 2-Dimension) employing DEM (Distinct Element Method) was used for the numerical analysis. Blasting demolition of scaled 3-D plain concrete laymen structure was filmed and compared to results of numerical simulation. Despite the limits of 2-D simulation the resulting demolition behaviors were similar to each other. Based on the above experimental results in combination with bending test results of RC beam, numerical analysis was carried out to determine the blasting sequence and delay times. Scaled model test of RC structure resulted in remarkably similar collapse with the numerical results up to 900㎳ (mili-second).

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.7
• /
• pp.57-65
• /
• 2011

Numerical simulations by three-dimensional Particle Flow Code($PFC^{3D}$, Itasca) considering distinct element method (DEM) were carried out for prediction of triaxial compression test with sand material. The effect of scale conditions for numerical model and distinct material on final prediction results was analyzed by numerical models under various scale conditions, and following observations were made from the numerical experiments. It is very useful to model the initial material condition without any porosity conversion from 2-D to 3-D DEM. Numerical experiments have shown that in all cases considered, 3D distinct element modeling could provide good agreement on stress-strain behavior, volume change and strength properties with laboratory testing results. It was important thing to assess reasonable scale ratio of numerical model and distinct elements for saving calculation time and securing calculation efficiency under condition with accuracy and appropriateness as numerical laboratory. As results of DEM simulations under various scale conditions, most of results show that shear strength properties as cohesion and internal friction angle are similar in condition of $D_{mod}/D_{gmax}$ < 10. It shows that 3-D distinct element method could be used as efficient tool to assess strength properties by numerical laboratory technique.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.7-7
• /
• 2018

1차원 하수관로 해석 모형과 2차원 지표면 유출 해석 모형을 연계한 1D-2D 결합 도시침수 모델은 도시지역의 유출 현상과 침수 모의에 널리 이용되고 있다. 그러나 도시 지역의 복잡한 지형이 지표면 유출 흐름에 미치는 영향을 보다 자세히 파악하기 위해서는 보다 높은 해상도의 지형자료를 활용한 모의가 필요하다. 본 연구에서는 도시침수 해석을 위한 1D-2D 결합 하이브리드(Hybrid) 병렬화 코드(H12)를 개발하여 넓은 도시 유역에 대해서 고해상도 지형자료를 활용한 모의가 유역단위로 가능하도록 하였다. H12는 Open Multi-Processing(OpenMP)와 Message Passing Interface(MPI) 병렬 계산을 동시에 수행하여 매우 넓은 지역에 대해서도 도로의 형태를 확인 할 수 있는 수준의 고해상도 침수 해석 모의가 가능하다. 또한 도시지역의 복잡한 지형을 자세히 재현하고 계산의 효율을 높이기 위하여 격자세분화 기법이 적용되었다. H12의 적용성을 평가하기 위하여 미국 텍사스 알링턴 지역의 Johnson Creek 유역(${\sim}40km^2$)유역에 대한 시범 모의를 수행하였으며 도시유역의 지형을 표현하기 위하여 1m 해상도의 LiDAR자료를 사용하여 침수발생시 보다 자세한 유출수의 흐름을 해석할 수 있도록 하였다. 모의 결과 하이브리드 병렬 계산은 순차적 계산에 비하여 최고 79배 이상 빠른 계산속도 효율 향상을 보여주었으며, OpenMP나 MPI를 단독으로 사용하는 것에 비하여 더욱 효율적인 계산속도 효율 향상을 보여주었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.200-214
• /
• 1993

This paper presents the results of fluidelastic instability analysis performed for the U-tube bundle of a Westinghouse model 51 steam generator, one of the recirculating types designed at an early stage, in which the principal region of external cross-flow is associated with the U-bend portion of tube. The prerequisites for this analysis are detailed informations of the secondary side flow conditions in the steam generator and the free vibration behaviours of the U-tubes. In this study, the three-dimensional two-phase flow field in the steam generator has been calculated employing the ATHOS3 steam generator two-phase flow code and the ANSYS engineering analysis code has been used to calculate the free vibration responses of specific U tubes under consideration. The assessment of the potential instability for the suspect U-tubes, which is the final analysis process of the present work, has been accomplished by combining the secondary side velocity and density distributions obtained from the ATHOS3 prediction with the relative modal displacement and natural frequency data calculated using the ANSYS code. The damping of tubes in two-phase flow has been deduced from the existing experimental data by taking into account the secondary side void fraction effect. In operation of the steam generator, the tube support conditions at the tube-to-tube support plate intersections due to either tube denting degradation or deposition of tube support plate corrosion products or ingression of dregs. Thus, various hypothetical cases regarding the tube support conditions at the tube-to-tube support plate intersections have been considered to investigate the clamped support effects on the forced vibration response of the tube. Also, the effect of anti-vibration bars support in the curved portion of tube has been examined.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.2
• /
• pp.168-175
• /
• 2008

In this study, we estimated the discharge capacity of Solicheon sluice gate in Gunjang national industrial complex by hydraulic physical scale model test and FLOW-3D. It was showed that the discharge capacity of gate carried by physical model test and numerical analysis was similar.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06c
• /
• pp.378-382
• /
• 1994

HMM 세그멘테이션을 이용하여 LVQ 알고리즘에 적용시킨 하이브리드 음성인식에 관한 연구이다. LVQ 학습알고리즘은 정적 패턴 분리를 위한 참조벡터 즉, 고정차원인 벡터들을 생성하는데 유리하다. 하이브리드 알고리즘은 정적패턴 인식에 사용 되어지는 LVQ 알고리즘에 HMM 세그멘테이션을 접목시켜 입력패턴을 정규화된 의미있는 값으로서 바꾸어 사용하는데 있다. 한국어 음절중 8개 모음 아, 이, 우, 에, 오, 애, 어, 으를 추출하여 인식실험을 하였다. 인식률은 화자종속일 경우 코드북수 256개를 기준으로 LVQ1, LVQ2, LVQ3, OLVQ1 알고리즘순으로 91.7%, 91.8%, 91.1%의 인식률을 구했고 화자 독립의 경우는 83.4%, 83.9%, 86.8%, 85.3%의 인식률을 구했다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1997.10a
• /
• pp.93-98
• /
• 1997

도시폐기물의 효율적인 소각 처리를 위해서 폐기물 처리량 50 ton/day의 화격자 소각로를 대상으로 화학반응을 고려하여 연소실 내부의 열유동 현상을 전산모사하였다. 수치해석 프로그램으로 상용코드인 PHOENICS를 사용하여 3차원 모사를 하여 실험으로 파악할 수 없는 연소실 내부의 유동 및 폐기물과 산화제와의 반응을 계산하였다. 건조부, 주연소부, 후연소부에 1차연소용공기, 연료의 분포 및 폐기물의 발열량이 노내 열유동 현상에 미치는 영향을 조사하였다. 1차연소용 공기의 분포에 따라 노내 유동장의 형태에 변화가 있었으며, 벽면에서의 복사열전달을 고려한 경우 2차연소실과 출구근처에서 온도분포가 파일롯트 플랜트 실험결과와 잘 일치하는 r서으로 나타났다.