• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.271-282
• /
• 2013

Recently, ITU-T/VCEG and ISO/IEC MPEG have started a new joint standardization activity on video coding, called High Efficiency Video Coding (HEVC). This new standard gives significant improvement in terms of picture quality for high resolution video. The main challenge in this upcoming standard is the time complexity. In this paper we have focused on CU splitting algorithm. We have proposed a novel algorithm which can terminate the CU splitting process early based on the RD cost of the parent and current level and the motion vector value of the current CU. Experimental result shows that our proposed algorithm gives on average more than about 10% decrement in time over ECU [8] with on average 1.78% of BD loss on the original.

• Journal of the Korean Vacuum Society
• /
• v.19 no.1
• /
• pp.14-21
• /
• 2010

Ge is one of the attractive channel materials for the next generation high speed metal oxide semiconductor field effect transistors (MOSFETs) due to its higher carrier mobility than Si. But the absence of a chemically stable thermal oxide has been the main obstacle hindering the use of Ge channels in MOS devices. Especially, the fabrication of gate oxide on Ge with high quality interface is essential requirement. In this study, $HfO_xN_y$ thin films were prepared by plasma-enhanced atomic layer deposition on Ge substrate. The nitrogen was incorporated in situ during PE-ALD by using the mixture of nitrogen and oxygen plasma as a reactant. The effects of nitrogen to oxygen gas ratio were studied focusing on the improvements on the electrical and interface properties. When the nitrogen to oxygen gas flow ratio was 1, we obtained good quality with 10% EOT reduction. Additional analysis techniques including X-ray photoemission spectroscopy and high resolution transmission electron microscopy were used for chemical and microstructural analysis.

• Polymer(Korea)
• /
• v.28 no.2
• /
• pp.143-148
• /
• 2004

${\alpha}$,$\omega$-Hydrogen polyorganosiloxane(HPMDMS) prepolymer was prepared from equilibrium polymerization ofoctamethylcyclotetrasiloxane, 1,3,5-trimethylcyclotrisiloxane, 1,3,5,7-tetravinyl-1,3,5,7-tetramethyl-cyclotetrasiloxane, and 1,1,3,3-tetramethyl disiloxane as an end-blocker in the presence of tetramethylammonium siloxanolate as a catalyst. Polyorganosiloxane modified with dimethylacrylamide(APMDMS) was prepared by hydrosilylation of HPMDMS with dimethylacrylamide in the presence of Pt catalyst, and followed by coordination of metal oxide (APMDMS-MO), such as NiO and FeO, to the amide moieties of the resulting polymer. The chemical structures of HPMDMS and APMDMS were confirmed by FT-IR and $^1$H-NMR analysis. Liquid silicone rubber containing metal oxide composite (LSRMO) was prepared by compounding APMDMS-MO, ${\alpha}$,$\omega$-vinylpolydimethylsiloxane, and a catalyst in a high speed dissolver. The thermal conductivity of LSRMO composite was determined to be 0.29 W/mK, and the volume resistivity exhibited a lower value than that of LSR composite. The mechanical and thermal properties of LSRMO and LSR composite were measured by UTM and TGA.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.221-229
• /
• 2006

Mineralogical and chemical examinations were performed on interstratified illite-smectite (I-S) minerals that occur in the mudstones from a petroleum exploration well in the Tertiary marine basin, Japan. X-ray diffraction analysis shows that component layers of illite in the interstratified I-S increase with increasing burial depth while those of smectie decrease. In addition, the randomly (R=0) interstratified illite-smectite is changed into Rp1 ordered I-S at a depth of about 4,000 m, which corresponds to the result of organic analysis and indicates a burial temperature of about $100^{\circ}C$. However, the present geothermal gradient shows that the conversion of the random I-S to R=0 ordered I-S is likely to occur at 3,000 m. This discrepancy may be interpreted by the reverse fault at 2,500 m which resulted in a deeper burial of sediments up to 1,000 m. Chemical analysis also shows the compositional variation in I-S with increasing depth: a decrease in Si and an increases in Al and K, indicating that the substitution of Al for Si in tetrahedral sheets is compensated by the addition of K to interlayers. K may be derived from K-feldspar and micas, which is present in the mudstones.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.16 no.2
• /
• pp.9-21
• /
• 1988

This study was to obtain effect of stem leading time and angles on the growing and flowering in climbing rose. The results were as follows : In the rambler type, climber type and pillar type, differences of bud size were decreased between upper ports and lower parts as leading angles were close to the horizon. And bud type was like a long-egg shape. regardless of growing type, differences of stets diameter between upper parts and lower parts were decreased when the angles were leaded horizon. In order to increase rate of shooting and flowering, regardless of leading time, rambler type was shooted in a short period and flowered evenly, from upper to lower parts of stem as leading angles were horizon. But in the case of 45$^{\circ}$, the rate of lower parts was nearly zero. In climber type, shooting and flowering was only happened to the lower parts of stem when leaded during growth stage according to leaded horizon. These phenomena are supposed that shooting and flowering rate are influenced by not only apical dominance but degree of bud growth. Meanwhile, pillar type was shooted and flowered evenly to lower parts when the stem was leaded during growth stage or not leaded completely. But in creeper type, there was no connection with the leading. Therefore, this type had better not leaded. Length of flowering stem, regardless of growing type, was equaled when leaded during growth stage according to leaded horizon.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.134-142
• /
• 2012

This paper presents a study of system identification on the tilt response of the L-type retaining wall located at Tanhyun 11th ACE Apartment, Ilsan in order to understand mechanism how the structure behaves in operational conditions and to provide a reference tilt values for assessing structural abnormality. The retaining wall was extraordinarily tall (14m) in urban area so the long-term monitoring system had been installed with 3 tilts-meters and 9 temperature sensors operational from Oct 2004 upto Nov 2007. By using 5-months continuous data in which all the 12 channels were up and running, the two prediction models, 1) the linear model, and 2) the state-space equation (SSE) model, have been identified by finding the best fitness model among all possible 511 combinations of input temperatures out of the 9 temperatures. The linear model which was simple in the model structure achieved the validation fittness of 68% due to the fact that the static model wasn't able to represent thermal dynamics. The SSE model achieved the validation fitness of 90% which was quite accurate considering various unexpected noises happening in field measurements.

• The Journal of the Korea Contents Association
• /
• v.8 no.11
• /
• pp.235-241
• /
• 2008

If the target volume cannot be included with one field at head and neck cancer, we commonly used two or more field. It is very important to irradiate uniform dose at junction area of the fields. However, according to body shape of patient or general condition of patient, skin junction area can be matched incorrect, So overdose area or underdose area can be appeared in the junction area. This study researched therapy technique which can give uniform dose at skin junction owing to applying the edge block of lateral field at head and neck cancer. We measured the changed distance and rotational angle between central line of anterior supraclavicle lymph node and low margin of right lateral field on simulation process using the shielding block of variable rotation. As a result, the changed distance between central line of anterior supraclavicle lymph node and low margin of right lateral field was below 2mm to ${\pm}$10cm distance at central line of Y axis, changed angle was average 1.28 degree. But by using it the shielding block of variable rotation, the incorrect match at junction can be minimized. We think that this technique is very efficient one to apply this technique at head and neck cancered by the movement of organs can be not included, Therefore we have to pay attention on the process to imput MLC layer

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.549-556
• /
• 2005

Response surface methodology (RSM) was applied in steaming and roasting processes of Polygonatum odoratum roots in order to monitor hypoglycemic components and sensory property. In steaming and roasting processes based on the central composite design with variations in steaming time $(60\~180\;min)$, roasting temperature $(110\~150^{\circ}C)$ and roasting time $(10\~50\;min)$, coefficients of determinations $(R^2)$ were 0.8691 (p<0.05), 0.8253 (p<0.l0), 0.8727 (p<0.05), 0.8706 (p<0.05) and 0.8316 (p<0.10) in soluble solid, stigmasterol, $\beta-sitosterol$, hypoglycemic component (total), and overall acceptability, respectively. The maximum value of soluble solid was $71.47\%$ in 65.24 min of steaming time, $126.93^{\circ}C$ of roasting temperature and 37.58 min of roasting time. The maximum value of hypoglycemic component (total) was $764.10\;{\mu}g/g$ in 107.76 min, $117.78^{\circ}C$ and 14.70 min. Meantime, the maximum value of overall acceptability was 6.89 in 126.04 min, $115.79^{\circ}C$ and 43.93 min. The predicted values in optimum conditions for hypoglycemic components and sensory property were in good agreement with experimental values.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.2
• /
• pp.430-457
• /
• 2017

The purpose of this study is to present meaningful information and policy implications concerning the determinants of royalties of technology transfer to stakeholder. To identify key determinants of royalties in technology transfer, this study conducted AHP survey analysis (Survey period: 01/09~31/10, 2016) of 96 government-funded research centers and 85 companies which were participants of the R&D project "Next Generation BioGreen21" of R.D.A in the "N" center from 2011 to 2015. Research results show that both parties acknowledge 'Technical considerations for determining the profitability of the technologies' and 'The interest and willingness of the management group' as critical factors for the determinants of royalties. The difference of each party is that private companies acknowledge 'Available budget plan' as a critical factor while the government-funded research centers value 'Market competitiveness'. These findings suggest four main policy implications which are the investigation of technological demands reflecting specific needs of industrial sites, the diversification of royalty payments for private companies, the differentiated research evaluation system for the purpose of technology transfer and the planning of public R&D project reflecting research time span of private companies.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_4
• /
• pp.1373-1389
• /
• 2019

KOMPSAT-5 is the first satellite in Korea equipped with X-band Synthetic Aperture Radar (SAR) instrument and has been operated since August 2013. KOMPSAT-5 is used to monitor the global environment according to its observation purpose and the availability of KOMPSAT-5 is also highlighted as the need of high resolution wind data for investigating the coastal region. However, the previous study for the validation of wind derived from KOMPSAT-5 showed that the accuracy is lower than that of other SAR satellites. Therefore, in this study, we developed the correction equation of normalized radar cross section (NRCS or backscattering coefficient) for improvement of wind from the KOMPSAT-5 and validated the effect of the equation using the in-situ measurement of ocean buoys. Theoretical estimated NRCS and observed NRCS from KOMPSAT-5 showed linear relationship with incidence angle. Before applying the correction equation, the accuracy of the estimated wind speed showed the relatively high root-mean-square errors (RMSE) of 2.89 m s^-1 and bias of -0.55 m s^-1. Such high errors were significantly reduced to the RMSE of 1.60 m s^-1 and bias of -0.38 m s^-1 after applying the correction equation. The improvement effect of the correction equation showed dependency relying on the range of incidence angle.