• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.274-281
• /
• 2009

Nylon 6 and nylon elastomer were prepared by anionic polymerization route. Nylon elastomers, composed of hard segment of polyamide(PA) and soft segment of polyether(PE), were synthesized by use of TDI terminated polyol with caprolactam. The morphology of the electrospun webs of nylon and nylon elastomers, observed by FE-SEM, showed that the porous electrospun web was composed of nanofibers, whose diameter were in the range of 100 to 180 nm. Their behavior of melting and crystallization and the chemical structure of nylon elastomers were investigated by DSC and ATR FT-IR. Result of tensile testing indicated that nylon has higher tensile strength and lower elongation than nylon elastomers. Atmospheric plasma(APP) with $O_2$ and $N_2$ as reactive gas modified the surface of electrospun nylon and electrospun nylon elastomers allowing them higher hydrophilicity, while APP with $CH_4$ as reactive gas modified the surface of polymers allowing higher hydrophobicity.

• Korean Journal of Pharmacognosy
• /
• v.51 no.4
• /
• pp.270-277
• /
• 2020

This study analyzed mycotoxins, aflatoxin B1, B2, G1, G2, fumonisin B1, B2, ochratoxin A and zearalenone, using LC-MS/MS and conducted risk assessment on 54 samples of seeds distributed in SeoulYangnyeongsi and the management status of extramural herbal dispensary facility. The matched calibration showed a good linearity as observed in 6 concentration levels(r2>0.999) as a result of method validation applied with Arecae semen. Limits of detection(LOD) and quantification(LOQ) were in the range of 0.02-0.11 ㎍/kg and 0.08-0.34 ㎍/kg, respectively. Recoveries also estimated, ranging from 65.1-99.7% with relative standard deviation(RSD) 0.5-6.3%. As a result of the method on 54 samples, mycotoxins were detected in 16 samples. Among them, two Thujae semen showed a degree of concentration that exceeded the aflatoxin specification. In the risk assessment, the human exposure safety standard values were calculated as ADI(Acceptable Daily Intake) for aflatoxin B1, fumonisin and zearalenone. Ochratoxin A was calculated as PTWI(Provisional Tolerable Weekly Intake). The MOE(Margine of Exposure) of aflatoxin B1 was in the range of 40.36-3536.88. And no items exceeded 100% in %TDI(Tolerable Daily Intake) and %TWI(Tolerable Weekly Intake) of fumonisin, zearalenone and ochratoxin A.

• Toxicological Research
• /
• v.19 no.2
• /
• pp.133-139
• /
• 2003

Allergic contact dermatitis may be caused by a wide variety of chemicals. A murine local lymph node assay (LLNA) has been developed as an alternative to guinea pig models for assessing the contact sensitization potential of chemical. However, there is a need to develop a nonradioisotopic endpoint for the LLNA, because of the radioisotopic method's requiring the use of special facilities. In this study, we investigated the development of a nonradioisotopic endpoint for LLNA using ELISA (enzyme-linked immunosorbent assay). Female Balb/c mice were treated by the topical application on the dorsum of both ears with four different strong sensitizers, 2,4-dinitrochlorobenzene (DNCB), oxazolone (OXZ), toluene diisocyanate (TDI), and trimellitic anhydride (TMA), and a strong irritant, sodium lauryl sulfate (SLS), once daily for three consecutive days. The proliferation of cells in the auricular Iymph node was analyzed by means of the labelling index (Ll) of bromodeoxyuridine (BrdU) incorporation into cells. The weights of the Iymph nodes in the mice treated with allergens, DNCB, OXZ, TDl and TMA were increased compared to the vehicle control. The stimulation index (Sl) of mice treated with DNCB, OXZ, TDl, and TMA was over three-fold increase compared to the vehicle control. However, the S1 of mice exposed to SLS was not significantly increased compared to the vehicle control, while the lymph node weight of SLS was significantly increased. These results suggest that the LLNA modified endpoint using ELISA based on BrdU incorporation could provide a useful method of screening for irritants and allergens.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.43-43
• /
• 2018

수생태계는 다른 여러 생태계 중에서 가장 위험에 처해있으며, 기후변화로 인한 수온, 수문 수질의 변화는 수생태계와 담수 생물다양성에 가장 큰 영향을 미치는 요인 중 하나이다. 본 연구에서는 생물 생태학적으로 변화하는 세계적인 물 관리 패러다임에 따라 한강유역에서의 미래 수생태계 평가를 수행하였다. 본 연구의 목적은 수생태 건강성 관측자료와 수질자료, SWAT 모형을 이용하여 미래 기후변화에 따른 한강유역의 수생태를 평가하는 것이다. 본 연구에서 선정한 수생태계 건강성 조사자료로 국립환경과학원에서 8년간(2008년~2015년) 봄과 가을 2차례에 걸쳐 모니터링 한 부착돌말류(TDI), 저서형 대형무척추동물(BMI), 어류(FAI)에 대한 수생태 등급자료 및 해당 지점에 대한 수온 및 수질자료를 이용하였다. 수집한 결과를 DB(T-N, $NH_4N$, $NO_3N$, T-P, PO4P)에 대한 수생태 등급의 상관성을 분석하고 수온 수질인자에 따른 수생태 등급을 나타내어 미래 기후변화에 따른 수생태 건강성 평가 및 예측을 실시하고자 하였다. Soil and Water Assessment Tool (SWAT) 모형은 유역의 신뢰성 있는 유역 수문, 수질 모의 및 기후변화 영향평가를 위하여 활용되었다. SWAT 모형을 이용하여 한강유역의 다목적댐(3개), 발전용댐(1개), 다기능보(3개) 운영을 고려하였고, 237개의 표준유역으로 분할한 뒤 수문 및 수질 모의를 수행하였다. 모형의 적용성 평가를 위해 댐 및 보의 유입량, 증발산량, 토양수분, 지하수위, SS, T-N, T-P에 대하여 보정(2005~2009) 및 검증(2010~2015)을 수행하였다. 기후변화에 따른 수문, 수질 및 수생태 평가를 위해 기상청의 HadGEM3-RA RCP 4.5와 8.5 시나리오를 적용하였으며, 기준년(1975-2005)년에 대해 2020s(2010-2039), 2050s(2040-2069), 2080s(2070-2099)의 수생태를 평가하였다.

• Journal of Environmental Science International
• /
• v.14 no.2
• /
• pp.121-128
• /
• 2005

Hexachlorobenzene (HCB) was analyzed in various marine organisms of Korea. HCB was detected in all organism samples with residual concentrations from 0.51 to 222 pg/g wet weight. HCB residue was the highest content in crustacean, and followed by bivalves, fish, cephalopods and gastropods. The residues were comparable to or lower than those in marine organisms of other countries. Daily dietary intake of HCB from seafood was estimated to be 13.4 pg/kg body weight/day. The relative contribution of taxonomic group to the total dietary intake of HCB were in the order of crustaceans $(40.1\%)$, bivalves $(34.2\%)$, fish $(23.1\%)$, cephalopods $(2.22\%)$, and gastropods $(0.38\%)$. Daily dietary intake of HCB expressed as toxic equivalent (TEQ) value was estimated to be $1.34\times10^{-3}pg$ TEQ/kg body weight/day. This value did not exceed tolerable daily intake (TDI) proposed by the WHO, the UK toxicity committee and the KFDA. Cancer risk and target hazard quotient (THQ) due to the consumption of the marine organism in Korean adult population were evaluated using the exposure equation of food ingestion. This result suggests that dietary intake of HCB by the consumption of Korean seafood seems to be safe for human health with negligible cancer and non-cancer risks so far.

• Economic and Environmental Geology
• /
• v.33 no.5
• /
• pp.391-404
• /
• 2000

This study investigated the geochemical characteristics of mine drainage discharged from an abandoned coal mine in the Hwasoon area. Surface water samples were collected from 23 locations along the Hancheon creek. The concentration of Zn and Cu in stream waters was highest at low pH (3.53), whereas the content of TDS and TDI was highest at high pH (7.78) due to the concentration of Ca, $HCO_3$ and $SO_4$. At the upstream site, the Ba, Fe, Mn, Zn, and $SO_4$ contents were relatively high but decreased significantly with the distance from the coal mine. On the contrary, the Na and $NO_3$ contents were low at the upstream site but increased downstream. Yellow precipitate material collected in the Hancheon consisted mainly of iron and LOI. This yellow precipitate was heated from 100 to $900^{\circ}C$ for 1 hour. With increasing temperature, the intensity of hematite peaks were sharply produced in X-ray pattern and the absorption band Fe-O of hematite increased in IR due to dehydration and melting. The yellow to brown precipitate and evaporite materials were collected by a air-dry from the acid mine water at the laboratory. After drying, the concentration of ions in the acid water samples increased progressively in oversaturation with respect to either gypsum, ferrohexahydrite or quenstedetite. The X-ray powder diffraction studies identified that the precipitated and evaporated materials after drying were well crystallized gypsum, ferrohexahydrite and quenstedetite. Diagnostic peaks used for identification of gypsum were the 7.65, 4.28, 3.03, 2.87 and 2.48$\AA$ peaks and those for ferrohexahydrite were the 5.46, 5.12, 4.89, 4.44, 4.05, 3.62, 3.46, 3.40, 3.20, 3.03, 2.94, 2.53, 2.28, 2.07, 1.88 and 1.86${\AA} peaks. The IR spectra with OH-stretching, deformation of $H_2O$and ${SO_4}^{2-}$stretching vibration include the existence of gypsum, ferrohexahydrite and quenstedetite in the precipitated and evaporite materials. In the SEM and EDS analysis for the evaporite material, gypsum with well-crystallized, acicular, and columnar form was distinctly observed.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.627-638
• /
• 1992

PPG and BPA-type polyurethane prepolymers(NCO terminated) were obtained from bisphenol A and four types of PPG, having different molecular weight and numbers of functional groups. PPG and BPA-type polyurethane dimethacrylates were synthesized by reacting PPG and BPA-type polurethane prepolymer with 2-HEMA respectively. PPG-type polyurethane dimethacrylates were formulated with initiator(CHP), inhibitor(hydroquinone) and reactive diluent(TEGDMA). The effect of formulation on the torque changes was studied. Four kinds of PPG-type polyurethane dimethacrylates, having different molecular weight and numbers of functional group, were formulated with the same amount of CHP, TEGDMA and hydroquinone. The effects of the molecular weight of PPG-type polyurethane dimethacrylate and functional group numbers of PPG-type polyurethane dimethacrylates on the torque were investigated. These results showed that the torque of PPG-type polyurethane dimethacrylates, having same numbers of functional group, increased with decreasing molecular weight of dimethacrylates and torque of PPG-type polyurethane dimethacrylate, having similar molecular weight, was increased with increasing the number of fuctional group. The glass-transition temperature(Tg) of gels obtained by thermosetting cure for the four kinds of PPG-type polyurethane dimethacrylates were measured by DSC and molecular weights between cross-links(Mc) were calculated from Tg changes.

• Journal of Food Hygiene and Safety
• /
• v.39 no.2
• /
• pp.95-101
• /
• 2024

In this study, we investigated the migration level of items specified in the Korean Standards and Specifications for Utensils, Containers, and Packages (Ministry of Food and Drug Safety Notification) for 50 utensils and hygiene products made of biodegradable resins. Our results revealed that one Polylactide (PLA) baby tableware contained 20 mg/L in consumption of potassium permanganate, exceeding the standard of 10 mg/L or less. In all other samples, formaldehyde, lead (Pb), and arsenic (As) levels could be considered very safe and remained below the standard. Moreover, we tested the PLA baby tablewares (n = 21) for migration into a food simulant (4% v/v acetic acid) upon repeated elution at 100℃ for 30 min or UV irradiation for 2 h. We detected increased formaldehyde and As amounts at the repeated 100℃ treatment for 30 min compared to those upon repeated UV irradiation. However, the migration level was markedly low under both conditions. Furthermore, the Estimated Daily Intake (EDI) calculated on an infant-to-child basis from the formaldehyde and As migration at 100℃ for 30 min in the PLA sample was at the maximum value, i.e., 6.0×10^-4 mg/kg b.w./day and 1.3×10^-1 ㎍/kg b.w./day, corresponding to 0.40% and 10.42% of the Tolerable Daily Intake (TDI, 0.15 mg/kg b.w./day) and Provisional Tolerable Weekly Intake (PTWI, 9.0 ㎍/kg b.w./week), respectively. Therefore, in this study, we confirmed that biodegradable synthetic resins are safe to use for food.

• Journal of Applied Biological Chemistry
• /
• v.55 no.4
• /
• pp.253-261
• /
• 2012

Dioxin contamination on agroproducts is one of the most important issue in food safety. Herein, we measured concentration of 17 dioxins polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) and 14 dioxin like-polychlorinated biphenyls (DL-PCBs) in the main grain (rice and barley) that were produced in Korea. The 36 rice samples were collected from rice processing complex at eight provinces, and the average concentrations of each province were ranged from 2.98 pg/g wet weight (w.w) to 4.98 pg/g w.w. as total PCDD/Fs and DL-PCBs. The seven barley samples were collected from Jeon-nam and Jeon-buk provinces, and their average total concentrations of PCDD/Fs and DL-PCBs were 3.00 pg/g w.w. and 3.24 pg/g w.w. respectively. The residual amounts and toxic equivalent (TEQ) of DL-PCBs in rice and barley were higher than PCDD/Fs. The average total TEQ of rice and barley were 0.0056 pg-TEQ/g and 0.0092 pg-TEQ/g on lower bound estimation respectively. Estimated daily intake of dioxins from rice and barley were calculated 1.03 pg-TEQ/day/person and 0.0534 pg-TEQ/day/person respectively. These were estimated 0.46% and 0.03% of Korean TDI based on 55 kg body weight.

• Applied Chemistry for Engineering
• /
• v.31 no.6
• /
• pp.630-634
• /
• 2020

We developed a processing recipe to synthesize flexible polyurethane foam with a pore size of 335 ± 107 ㎛. The gelling reaction time was varied from 0 to 30 minutes and the physical properties of the foam were evaluated. The gelling reaction where the polypropylene glycol and tolylene 2,4-diisocyanate (TDI) were reacted to form urethane prepolymer, proceeded until a chemical blowing agent, deionized water, was introduced. Fourier transform infrared (FT-IR) spectra showed that the composition of the foam did not change but the foam height reached a peak value when the gelling reaction time was 10 minutes. We found that increasing the gelling time lessened the coalescence and helped the formation of cells. Lastly, the repeatability of polyurethane foam was confirmed by one-way analysis of variance (ANOVA) by synthesizing ten identical polyurethane foams under the same experimental conditions, including the gelling reaction time. Overall, the new time parameter in-between the gelling and blowing reactions will give extra stability in manufacturing identical polyurethane foams and can be applied to various polyurethane foam processes.