• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.194-200
• /
• 2017

This study aimed to determine the suitable of harvest time on the growth and quality of baby leafy vegetables (Agastsche rugosa O. Kuntze and Lepidium sativum L.) grown on rice seedling tray in a six-layered bench system at 30cm intervals in order to exploit the space during rice growing off-season. Seedlings were grown on the rice seedling tray for 10 days after sowing with coir substrate supplied with nutrient solution at EC $1.5dS{\cdot}m^{-1}$ every 2 days prior to placing the tray on the bench, which were at $1^{st}$ (Low) layer above 20cm and $6^{th}$ (High) layer above 170cm apart from the ground. Growth and phytochemical contents were measured at 7-day and 14-day harvest time. During the culture periods, daily average of integrated solar radiation and temperature were $9.3{\sim}9.6MJ{\cdot}m^{-2}$, $27.5^{\circ}C$ in the High layer and $5.1{\sim}6.2MJ{\cdot}m^{-2}$ in average, and $26.5{\sim}26.6^{\circ}C$ in the Low layer, respectively. For A. rugosa, the highest growth was observed in the Low layer bench at a 14-day harvest time, while their plant height in the High layer was shorter and the leaf number was lower. For L. sativum, the plant height, leaf length and width, leaf number and fresh weight were higher in the Low layer. For A. rugosa, a high yield was observed with the increase in integrated temperature and integrated solar radiation, while a higher yield of L. sativum was found with the increase in integrated temperature, but not with integrated solar radiation. For A. rugosa, both polyphenol and anthocyanin contents were higher in the High layer at a 14-day harvest time. For L. sativum, polyphenol contents were higher in the High layer, whereas no significant difference in anthocyanin and flavonoid contents was observed depending on the layer and harvest time. The highest chlorophyll content showed in Low layer at a 7-day harvest time in both A. rugose and L. sativum. All of the results suggest that in terms of growth and quality, it may be better growing in the high layer for 14 days after seedling in A. rugosa, and low layer for 7 days in L. sativum.

• Journal of Sasang Constitutional Medicine
• /
• v.12 no.1
• /
• pp.48-62
• /
• 2000

Creativity is the most important characteristic and ability in the 21st century. Recently leading people in Korean society are aware of the significance of the enhancement of the creativity. However, Korean students are less likely to take initiative or depart from standard ways of thinking or doing things, because Korean Confucius culture puts an emphasis on collectivism. An individual has an obligation to conform in order to avoid conflict and maintain social harmony. The rule of respecting parents and teachers leads to a lack of self-expression and entails silence. Brainstorming technique developed by American Osbron, who originated the group brainstorming in 1953, is the most popular creative thinking method for the students. Brainstorming technique has two principles : ideation can be more productive if criticism is concurrently excluded; The more ideas the better. In doing BS, each panel should consist of chairperson, an assistant chairperson, recorder, and 10 others including 2-3 females. However there are several problems in doing group BS, such as production blocking, uniformity thinking, evaluation apprehension, and social loafing. This study was undertaken to investigate the proper way of forming Brainstorming groups with Korean students according to the Sasang Constitutional Medicine originated by Korean Lee Je-ma in 1894. Human beings are classified in four group in Sasang Constitutional Medicine : Taeyang-In, Teaum-In, Soyang-In and Soum-In. Two Yang-Ins are more self-expressive : Taeyang-In has very unique ides and thoughts; Soyang-In is very humorous and like to present his/her ideas. On the other hand, two Um-Ins are passive and are not likely to speak out their ideas in group. Therefore, in this investigation firstly, the brainstorming group was formed with two Yang-Ins (Taeyang-In and Soyang-In) and two Um-Ins(Taeum-In and Soum-In) separately and secondly, Yang-Ins and Um-Ins were mixed. And the first method was compared with the second method in terms of the degree of participation of the group members and finally the better grouping method to produce more and better ideas was discussed and suggested for the educational system.

• Korea Journal of Hospital Management
• /
• v.23 no.3
• /
• pp.28-38
• /
• 2018

Purpose: To evaluate the medical expenditures for prostate cancer patients, including out-of-pocket costs, and compared the costs between androgen deprivation therapy and radical prostatectomy treatment. Methodology: This study combined clinical data from 357 prostate cancer patients from the Smart Prostate Cancer Database and the medical expenditure data from the claims and cost databases. We used the independent two-sample t-tests to compare androgen deprivation therapy and radical prostatectomy. Multivariable logistic regression analysis was conducted to identify determining factors for androgen deprivation therapy and radical prostatectomy treatments. Findings: The medical costs of androgen deprivation therapy treatment were much lower than radical prostatectomy treatment at the one year and remained lower until the fourth-year. However, after four years, the accumulated medical expenditures of androgen deprivation therapy become significantly higher than radical prostatectomy treatment. Patients with a higher cancer stage and older age had higher chances of being treated using androgen deprivation therapy treatment than radical prostatectomy treatment. Practical Implications: Our results show that early detection of cancer reduces the treatment cost for both patients and insurance payers. It also demonstrates that cost comparisons should be conducted over long periods of time in order to most accurately assess the costs.

• Archives of design research
• /
• v.12 no.1
• /
• pp.27-36
• /
• 1999

The history of the Korean textile industry is not very long. Its growth only began from the early 1960's. Since then, its production scale and export volume have enpanded enormosly. The textile industry made a great contribution to Korea's sustained economic growth over the past three decades. While expanding rapidly, however, the Korean textile industry went through many difficulties and problems. To survive through interational competition, the textile produce were manufactured on a subcontract basis and prices were set at too low levels. Consequently the profit margins were very small. To meet international competition for the 21st century, the textile industry requires restructuring and a drastic progress has to be made in textile design and technology. To become internationally competitive, the education system for textile design must be improved. The textile schools must be equipped with better technology and facilities so that students may have a hands-on experience and acquire application skills quickly and effectively. Also students should be given an opportunity to work in the industry as an intern. In order to make all these possible, both the government and the industry must be fully supportive. Textile designing can be considered a cultural reflection. This implies that to develop the textile industry requires the elevation of the people's mind and culture. To improve textile technology and to elevate the standard of textile design, the government and the textile schools must make continued effort together.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.261-272
• /
• 2006

As we cannot think of our lives without a nation, it is closely related to almost every part of our daily lives. The role of government is becoming more important in the complex modern society as an essential element of national authority even though the government has indirect and secondary characteristics in its functional performance. Therefore, the government has to be efficient in planning and executing its policies, and it needs to be representative and fair as part of a national authoritative community. In the 21st century when symbolic and cultural importance of images are becoming more important, it is crucial for the government organizations to have an integrated identity design system that can satisfy both of these requirements of the government. However, the C.I.(Corporate Identity) of each Korean administrative branch has been developed separately and sporadically, which resulted in lack of consistency as part of the government. Shape and material of their C.I.s that follow short term design trend and popularity also lack uniqueness which can be distinguished from those of any private corporation. This may show that our government lacks systematic administrative capability, since image of a feature represents its characteristics and reality, and their recognition and evaluation from others become identity of the feature. In this perspective, the purpose of this thesis is to suggest an identity design system that has certain rules and regularity with wide variety of possible alterations for the central administration in Korea. In order to represent this visually, identity design system with both integrity and variety of possible alteration is created based on traditional Korean culture, especially the concept of Umyang-ohaeng and Samjae.

• Journal of Intelligence and Information Systems
• /
• v.25 no.2
• /
• pp.57-75
• /
• 2019

In this paper, we conducted a study focusing on the innovation direction of the documentary model on the Internet of Things industry, which is the most actively industrialized among the core technologies of the 4th Industrial Revolution. Policy, economic, social, and technical issues were derived using PEST analysis for global trend analysis. It also presented future prospects for the Internet of Things industry of ICT-related global research institutes such as Gartner and International Data Corporation. Global research institutes predicted that competition in network technologies will be an issue for industrial Internet (IIoST) and IoT (Internet of Things) based on infrastructure and platforms. As a result of the PEST analysis, developed countries are pushing policies to respond to the fourth industrial revolution through cooperation of private (business/ research institutes) led by the government. It was also in the process of expanding related R&D budgets and establishing related policies in South Korea. On the economic side, the growth tax of the related industries (based on the aggregate value of the market) and the performance of the entity were reviewed. The growth of industries related to the fourth industrial revolution in advanced countries overseas was found to be faster than other industries, while in Korea, the growth of the "technical hardware and equipment" and "communication service" sectors was relatively low among industries related to the fourth industrial revolution. On the social side, it is expected to cause enormous ripple effects across society, largely due to changes in technology and industrial structure, changes in employment structure, changes in job volume, etc. On the technical side, changes were taking place in each industry, representing the health and medical sectors and manufacturing sectors, which were rapidly changing as they merged with the technology of the Fourth Industrial Revolution. In this paper, various management methodologies for innovation of existing business model were reviewed to cope with rapidly changing industrial environment due to the fourth industrial revolution. In addition, four criteria were established to select a management model to cope with the new business environment: 'Applicability', 'Agility', 'Diversity' and 'Connectivity'. The expert survey results in an AHP analysis showing that Business Model Canvas is best suited for business model innovation methodology. The results showed very high importance, 42.5 percent in terms of "Applicability", 48.1 percent in terms of "Agility", 47.6 percent in terms of "diversity" and 42.9 percent in terms of "connectivity." Thus, it was selected as a model that could be diversely applied according to the industrial ecology and paradigm shift. Business Model Canvas is a relatively recent management strategy that identifies the value of a business model through a nine-block approach as a methodology for business model innovation. It identifies the value of a business model through nine block approaches and covers the four key areas of business: customer, order, infrastructure, and business feasibility analysis. In the paper, the expansion and application direction of the nine blocks were presented from the perspective of the IoT company (ICT). In conclusion, the discussion of which Business Model Canvas models will be applied in the ICT convergence industry is described. Based on the nine blocks, if appropriate applications are carried out to suit the characteristics of the target company, various applications are possible, such as integration and removal of five blocks, seven blocks and so on, and segmentation of blocks that fit the characteristics. Future research needs to develop customized business innovation methodologies for Internet of Things companies, or those that are performing Internet-based services. In addition, in this study, the Business Model Canvas model was derived from expert opinion as a useful tool for innovation. For the expansion and demonstration of the research, a study on the usability of presenting detailed implementation strategies, such as various model application cases and application models for actual companies, is needed.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.11-19
• /
• 2014

Purpose : To derive the most appropriate factors by considering the effects of the major factors when applied to the optimization algorithm, thereby aiding the effective designing of a ideal treatment plan. Materials and Methods : The eclipse treatment planning system(Eclipse 10.0, Varian, USA) was used in this study. The PBC (Pencil Beam Convolution) algorithm was used for dose calculation, and the DVO (Dose Volume Optimizer 10.0.28) Optimization algorithm was used for intensity modulated radiation therapy. The experimental group consists of patients receiving intensity modulated radiation therapy for the head and neck cancer and dose prescription to two planned target volume was 2.2 Gy and 2.0 Gy simultaneously. Treatment plan was done with inverse dose calculation methods utilizing 6 MV beam and 7 fields. The optimal algorithm parameter of the established plan was selected based on volume dose-priority(Constrain), dose fluence smooth value and the impact of the treatment plan was analyzed according to the variation of each factors. Volume dose-priority determines the reference conditions and the optimization process was carried out under the condition using same ratio, but different absolute values. We evaluated the surrounding normal organs of treatment volume according to the changing conditions of the absolute values of the volume dose-priority. Dose fluence smooth value was applied by simply changing the reference conditions (absolute value) and by changing the related volume dose-priority. The treatment plan was evaluated using Conformal Index, Paddick's Conformal Index, Homogeneity Index and the average dose of each organs. Results : When the volume dose-priority values were directly proportioned by changing the absolute values, the CI values were found to be different. However PCI was $1.299{\pm}0.006$ and HI was $1.095{\pm}0.004$ while D5%/D95% was $1.090{\pm}1.011$. The impact on the prescribed dose were similar. The average dose of parotid gland decreased to 67.4, 50.3, 51.2, 47.1 Gy when the absolute values of the volume dose-priority increased by 40,60,70,90. When the dose smooth strength from each treatment plan was increased, PCI value increased to $1.338{\pm}0.006$. Conclusion : The optimization algorithm was more influenced by the ratio of each condition than the absolute value of volume dose-priority. If the same ratio was maintained, similar treatment plan was established even if the absolute values were different. Volume dose-priority of the treatment volume should be more than 50% of the normal organ volume dose-priority in order to achieve a successful treatment plan. Dose fluence smooth value should increase or decrease proportional to the volume dose-priority. Volume dose-priority is not enough to satisfy the conditions when the absolute value are applied solely.

• Journal of radiological science and technology
• /
• v.39 no.1
• /
• pp.1-11
• /
• 2016

The purpose of this study was to provide resources for medical exposure reduction through evaluation of organ dose and image resolution for lumbar spine around according to the size of the collimator in DR system. The size of the collimator were varied from $8^{\prime\prime}{\times}17^{\prime\prime}$ to $14^{\prime\prime}{\times}17^{\prime\prime}$ by 1" in AP and lateral projection for the lumbar spine radiography with RANDO phantom. The organ dose measured for liver, stomach, pancreas, kidney and gonad by the glass dosimeter. The image resolution was analyzed using the Image J program. The organ dose of around lumbar spine were reduced as the size of the collimator is decreased in AP projection. There were no significant changes decreasing rate whenever the size of the collimator were reduced 1" in the gonad. The organ dose showed higher on liver and kidney near the surface in lateral projection. There were decreasing rate of less than 5% in liver and kidney, but decreasing rate was 24.34% in the gonad whenever the size of the collimator were reduced 1". Organ dose difference for internal and external of collimator measured $549.8{\mu}Gy$ in the liver and $264.6{\mu}Gy$ in the stomach. There were no significant changes organ dose difference that measured $1,135.1{\mu}Gy$ in the gonad. Image Quality made no difference because SNR and PSNR were over than 30 dB when the collimator size is less than $9^{\prime\prime}{\times}17^{\prime\prime}$ on AP projection and $10^{\prime\prime}{\times}17^{\prime\prime}$ on lateral projection. Therefore, we are considered that the recommendations criterion for control of collimator were suggested in order to reduce unnecessary X-ray exposure and to obtain good image quality because lumbar spine radiography contains a lot of peripheral organs rather than other area radiography.

• The Korean Journal of Rehabilitation Nursing
• /
• v.2 no.2
• /
• pp.257-270
• /
• 1999

The purpose of this study is to investigate factors related to the intent of using home nursing of chronic disease patients who got out of a university hospital. For the purpose, the study selected 153 patients who were hospitalized and left K university hospital with diagnoses of cancer, hypertension, diabetes and cerebral vascular accident and ordered to be discharged and performed interviews with them and surveys on their medical records to obtain the following results. For this study a direct-interview survey and medical record review was conducted from June 28 to Aug. 30, 1998. The frequency and mean values were computed to find the characteristics of the study subjects, and $X^2$-test, t-test, factor analysis and multiple logistic regession analysis were applied for the analysis of the data. The following results were obtained. 1) When characteristics of the subjects were examined, men and women occupied for 58.8% and 41.2%, respectively. The subjects were 41.3 years old in aver age and had the monthly aver age earning of 0.99 million won or below, which was the most out of the total subjects at 34.6%. Among the total, 87.6% resided in cities and 12.4 in counties. The most left the hospital with diagnosis of cancer at 51.6%, followed by hyper tension at 24.2%, diabetes at 13.7% and cerebral vascular accident at 7.2%. 2) 93.5% of the selected patients had the intent of using home nursing and 6.5%, didn't. Among those patients having the intent, 85.6% had the intent of paying for home nursing and 14.4%, didn't. The subjects expected that the nursing would be paid 9,143 won in aver age and 47.7% of them preferred national authorities as the main servers. 86.3% of the subjects thought that home nursing business had the main advantage of making it possible to learn nursing methods at home and thereby contributing to improving the ability of patients and their facilities to solve health problems. 3) Relations between the intent of use and characteristics of the subjects such as demography-related social, home environment, disease and physical function characteristics did not show statistically significant differences among one another. Compared to those who had no intent of using home nursing, the group having the intent had more cases of male patients, the age of 39 or below, residence in cities, 5 family member s or more, no existence of home nursing servers, leaving the hospital from a non-hospitalized building, disease development for five months or below, hospitalization for ten days or more, non-hospitalization with in the recent one month, two times or over of hospitalization, leaving the hospital with no demand of special treatment, operation underwent, poor results of treatment, leaving the hospital with demand of rehabilitation services, physical disablement and high evaluation point of daily life. 4) Among those patients having the intent of using home nursing, 47.6% demanded technical nursing and 55.9%, supportive nursing. As technical nursing,' inject into a blood vessel ' and 'treat pustule and teach basic prevention methods occupied for 57.4%, respectively, topping the list. Among demands of supportive nursing, 'observe patients 'status and refer them to hospitals or community resources as available, if necessary' was the most with percent age point of 59.5. Regarding the intent of paying for home nursing, 39.2% of those patients wishing to use the nursing responded paying for technical services and 20.2, supportive services. In detail, 70.0% wanted to pay for a service stated as 'inject into a blood vessel', highest among the former services and 30.7%, a service referred to as 'teaching exercises needed to make the body of patients move', highest among the latter. When this was analyzed in terms of a relation between the need(the need for home nursing) and the demand(the intent of paying for home nursing), The rate of the need to the demand was found two or three times higher in technical nursing(0.82) than in supportive nursing(0.35). In aspects of tech ical nursing, muscle injection(1.26, the 1st rank) was highest in the rate while among aspects of supportive nursing, a service referred to as 'teach exercises needed for making patients move their bodies normally'(0.58, the 1st rank). 5) factors I(satisfaction with hospital services), II(recognition of disease state), III(economy) and IV(period of disease) occupied for 34.4, 13.8, 11.9 and 9.2 percents, respectively among factors related to the intent by the subjects of using home nursing, totaled 59.3%. In conclusion, most of chronic disease patients have the intent of using hospital-based home nursing and satisfaction with hospital services is a factor affecting the intent most. Thus a post-management system is needed to continue providing health management to those patients after they leave the hospital. Further, supportive services should be provided in order that those who are satisfied with hospital services return to their community and live their in dependent lives. Based on these results, the researcher would make the following recommendation. 1) Because home nursing becomes more and more needed due to a sharp increase in chronic disease patients and elderly people, related rules and regulations should be made and implemented. 2) Hospital nurses specializing in home nursing should be cultivated.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.207-216
• /
• 2007

The purpose of this study was to biomechanical analysis Judo's Kuzushi throwing motion in order to increase the effectiveness of Nage-waja(throwing technique). The Tori was a Judo player with 18 years experience(4th degree) while the Uke was a player with 2 years experience(1st degree). The kinematic data was captured using the Vicon motion system (7 cameras) and the kinetics were recorded by force plates(2 AMTI). The following were the results; While leaning to the front the subject's trunk's angle was $14.5^{\circ}$, the lower limbs angle was $23.8^{\circ}$, knee angle was $179.6^{\circ}$ and the vertical reaction of the left leg was 325.42N(BW 0.34) and the right leg was 233.7N(BW 0.47). While leaning back the subject's trunk's angle was $11.3^{\circ}$, the lower limbs angle was $4.1^{\circ}$, knee angle was $1761^{\circ}$ and the vertical reaction of the left leg was 299.53N(BW 0.43) and the right leg was 441.7N(BW 0.64). While leaning to the left the subject's trunk's angle was $30.8^{\circ}$, the lower limbs angle was $2.7^{\circ}$, knee angle was $175.2^{\circ}$ and the vertical reaction of the left leg was 711N(BW 1.03) and the right leg was 9.2N(BW 0.01). While leaning to the right the subject's trunk's angle was $36.5^{\circ}$, the lower limbs angle was $10.4^{\circ}$, knee angle was $175.2^{\circ}$ and the vertical reaction of the left leg was 13.2N(BW 0.02) and the right leg was 694.7N(BW 1.01). While leaning to the left front corner the subject's trunk's angle was $19.8^{\circ}$ (front) and $15.1^{\circ}$ (left), the lower limbs angle was $17.8^{\circ}$ (front) and $2.4^{\circ}$ (left), knee angle was $177.8^{\circ}$ (front) and $173.9^{\circ}$(left), and the vertical reaction of the left leg was 547.4N(BW 0.8) and the right leg was 117.8N(BW 0.17). While leaning to the right front corner the subject's trunk's angle was $15.4^{\circ}$ (front) and $17.7^{\circ}$ (right), the lower limbs angle was $21.1^{\circ}$, (front) and $5.7^{\circ}$ (right), knee angle was $175.5^{\circ}$ (front) and $178.9^{\circ}$(right), and the vertical reaction of the left leg was 53N(BW 0.08) and the right leg was 622.4N(BW 09). While leaning to the left rear corner the subject's trunk's angle was $9.2^{\circ}$ (back) and $13.8^{\circ}$ (left), the lower limbs angle was $2^{\circ}$, (back) and $5.7^{\circ}$ (left), knee angle was $175.5^{\circ}$ (back) and $172.8^{\circ}$(left), and the vertical reaction of the left leg was 698.2N(BW 1.02) and the right leg was 49.6N(BW 0.07). While leaning to the right rear corner the subject's trunk's angle was $8.9^{\circ}$ (back) and $19.6^{\circ}$ (right), the lower limbs angle was ${0.6^{\circ}}_"$ (back) and $3.1^{\circ}$ (right), knee angle was $174.6^{\circ}$ (back) and $175.6^{\circ}$(right), and the vertical reaction of the left leg was 7.2N(BW 0.01) and the right leg was 749.4N(BW 1.09). It was observed that during the Judo motion Kuzushii the range of the COM varied from $26.5{\sim}39.9cm$. It was concluded that the upper body leaned further than the lower body as there was knee extension. There was high left leg reaction forces while leaning to the left and likewise for the right side. It was therefore deduced that the Kuzushi was a more effective throwing technique for the left side.