• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.220-225
• /
• 2003

Recent issue of optical actuator is applying to mobile device. It leads actuator to become smaller than conventional type. This paper proposes the design of micro actuator plate spring and analysis of its vibration characteristic. Considering natural frequency of spindle motor, 1st and 2nd eigenfrequency of micro actuator must avoid its natural frequency. First, magnetic circuit is designed by using fine pattern coil and magnetic force is acquired by simulation program. Then, concept design is achieved by topology optimization. From concept design, micro actuator plate spring is embodied through DOE(design of experiment). Finally, considering vibration characteristic simultaneously, optimal plate spring design is determined by RSM(response surface method).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.500-507
• /
• 1997

Recently, the construction of infrastructures has been booming and accelerating to keep up with rapid economic growth. Construction activities and operation of transportation facilities cause unfavorable effects such as civil petitions associated with vibration-induced damages or nuisances. The objective of this study is to develop vibration-controlled concrete using various vibration-controlling materials , and also to investigate dynamic properties of concrete beam depending on damage level. Vibration-controlled mixtures are latex, rubber powder and plastic resin, which have been determines to by and large reduce vibration. KS F2437 has been used to figure out 1st natural frequency and dynamic flexural rigidity. Dynamic damping rations have been, computed by adopting the polynomial curvefitting method on the frequency spectrum curve, of which results have been compared and analyzed hereon

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.394-400
• /
• 1996

Recently, the construction of infrastructures has been booming and acceleratin to keep up with rapid economic growth. Consturction activities and operation of transportation facilities caues unfavorable effects such as civil petitions associated with vibration-induced damages or nuisances. Vibration-controlled mixtures are latex, rubber powder and plastic resin, which have been deternimed to reduce vibration by and large reduce vibration. KS F2437 and travel time method have been used to figure out 1st natural frequency and dynamic elastic moduli. Dynamic damping ratios have been computed by adopting the polynomial curvefitting method and the geometric analysis method on the frequency spectrum curve, of which results have been compared and analyzed hereon.

• 한국산학기술학회논문지
• /
• 제7권5호
• /
• pp.766-770
• /
• 2006

헬스클럽과 가정에서 사용되는 운동기구의 종류와 기능은 다양해지고 있으나 운동기구의 안전과 내구성에 대한 신뢰할 수 있는 자료는 부족한 실정으로서 이에 대한 연구 필요성이 절실히 요구되고 있다. 본 논문에서는 상호연동형 노르딕 기구에 작용하는 하중과 강도조절장치에 발생하는 인장하중이 노르딕 기구의 고유 진동수에 미치는 영향을 파악함으로써 진동 발생 요소를 제어하는데 목적이 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.192-194
• /
• 1998

This paper proposes a power supply for welding machine of reducing conduction Losses. To improve the conventional Phased-Shift FB DC-DC converter's problems that the copper loss in the high frequency transformer and conduction losses in the 1st terms bridge switch device because the leakage energy in the high frequency transformer and inducing of circulating current. This paper suggested a new topology of FB PWM DC-DC converter for welding machine to minimize a circulating current.

• 한국소음진동공학회논문집
• /
• 제13권6호
• /
• pp.423-429
• /
• 2003

On this study. we improved the efficiency applying algorithm that is repeatedly using table of orthogonal array in discrete design space and filling a defect of gradient method in continuous design space. we showed optimal ply angle that maximized 1st natural frequency of CFRP laminated composite plate without a hole and with a hole by each aspect ratio. In the case of CFRP laminated composite plate without a hole, we confirmed the reliance and efficiency of algorithm in comparison with the result of optimization achievement repeatedly using statistical table of orthogonal array of experimental design and the BFGS optimal design method.

• 한국산업융합학회 논문집
• /
• 제26권6_3호
• /
• pp.1341-1347
• /
• 2023

This study proposes to ensure the seismic stability of an existing switchboard for emergency diesel generator by applying mode analysis, static analysis and dynamic analysis. First, a three dimensional model for the swithboard was made with simplification for mode analysis. Next, The mode analysis for the finite element model of the existing switchboard was performed. The 1st natural frequency below 33 Hz, the seismic safety cutoff frequency, was calculated to be 21.943 Hz. Finally, based on the seismic stability theory, the von-Mises equivalent stresses derived by structural analysis and response spectrum analysis under the normal and faulted conditions were 74.179 MPa and 49.769 MPa, respectively. These are less than specified allowable stresses. So seismic stability was confirmed.

• 보건교육건강증진학회지
• /
• 제22권2호
• /
• pp.47-61
• /
• 2005

Objectives: This study aimed to investigate the relationship between consumption of sweet drinks and foods with accompanying oral hygiene health behaviors, and their condition of oral hygiene rural residents who are expected to have relatively poor oral hygiene compared to their urban counterparts. Methods: The 384 subjects, who are aged over 40 and have taken dental examination by dentists in health branches in 6 Myouns, Kongju city, Chungchongnamdo Province during the period between June 1st through 31st, 2004, were asked about dental health behaviors and subjective symptoms using questionnaires. Results and Conclusions: Based on dental health behavior according to sweet beverage and food, the dental health behavior was desirable in both sexes for 'almost daily drink' concerning sweet beverages and 'almost never eat' concerning sweet food, with no statistical significance. As for oral conditions, the groups who responded to 'almost daily drink/eat' for sweet beverages and food had the highest rate of non-treated teeth, lost teeth, DMFT and CPITN, with no statistical significance. Multiple logistic regression analysis with the consumption frequency of sweet foods as explanatory variables and 5 factors of oral conditions as dependent variables, revealed that there was no statistical significance in the oral conditions according to the consumption frequency of sweet drinks while, as for sweet drinks, there was a significant difference to the group who answered as 'occasional gum bleeding' in the case of 'almost daily eat.' responders(OR= 2.33, 95% CI=1.42-3.81, p<0.05).

• 한국미생물·생명공학회지
• /
• 제11권1호
• /
• pp.75-79
• /
• 1983

Bocillus subtilis를 유전공학의 숙주 세포로서 이용하기 위해서는 우선 적당한 vector의 개발이 요구된다. Oxytetracycline의 항생물질을 생산하는 방사선균인 Streptomyces rimosuf IFO 0014로 부터 oxytetracycline-resistant plasmid DNA를 pH 9.0의 phenol-buffer system으로 추출하여 B.subtilis KPM 60[St $r^{R}$-mutant of RM 125 (leu A8, arg 15, hsr $M^{-}$, hsm $M^{-}$)] 1균주에 형질전환시키면서 이 plasmid DNA가 표현되게 하였다. 이때 형질전환의 조건으로서 KPM60을 growth medium에서 3시간, competence medium에서는 30분내지 60분간 그리고 DNA와는 20분동안 접촉시킴으로서 가장 높은 빈도로 형질전환이 일어났다. (대개 $10^{-4}$ 빈도 이상) 또 recipient cell의 competence화에는 oH7.5에서 그리고 형질전환에는 2$0^{\circ}C$에서 최적상태를 보였다.

• 환경위생공학
• /
• 제24권2호
• /
• pp.17-30
• /
• 2009

In Iksan city, there have been a lot of complaints caused by offensive odor from residents living near the public environmental infrastructures and the Iksan industrial complex. To solve these problems, it is important to know the present condition of odor pollution level in these areas, the emission characteristics of malodorous gases in temporal and spatial variations in addition to meteorological components, and the facilities of major sources emitting malodorous compounds. The objectives of this study is to make the odor monitoring network for 20 people who lived and worked in areas where the environmental infrastructures and the Iksan industrial complex are located and their neighboring areas for six months from June 1st to October 31st in 2008 in Iksan and to monitor the temporal and regional frequency and characteristics of odor intensity using direct olfactory methods. As a result of odor monitoring, the highest frequency of sensed odor per month and 20 people for six months was found to be 107 in July, followed by 84 in September, 80 in August, 54 in June, 38 in October, respectively. Odor intensity trend showed a regional trend in the decreasing order of Dongsan-dong, Busong-dong, and Palbong-dong. Odor was widely perceived from night through next morning and considered as the sense of excreta, chemicals, sewage, compost, waste, etc. When high odor intensity was sensed, there were constant meteorological characteristics: relative humidity was 80~90%, wind speed was less than 0.5~1 m/sec, and main wind directions were from the east, the southeast, and the south.