• KSBB Journal
• /
• v.10 no.1
• /
• pp.15-22
• /
• 1995

The embryos(6-8mm) isolated from seeds of Diospyros kaki were cultured on Murashlge-Skoog(MS), Woody Plant Medium(WPM), Campbell Durzen(CD), Lictvay's Medium(LM), Kao-Michaluk(KM), Nitsch, White, Heller, Wolter-Skoog(WS) media. The results showed that MS and WPM media were most suitable to the development of embryos into plantlets with length of $5.4{\pm}1.2 cm$ and 5-6 leaves. However, when LM and KM media were used, the addition of 1 to $2{\mu} moles/\ell GA_3$ was required for the germination of the embryos. Superoxide dismutase (SOD) activities, one of the changing factors in leaves according to physiological status displayed to be exceptionally significant in the leaves of plantlets germinated from seeds in potting sand soil contrary to those of cultured embryos specially around germination period.

• Plant Biotechnology Reports
• /
• v.4 no.2
• /
• pp.129-138
• /
• 2010

An efficient transformation system for high-throughput functional genomic studies of kiwifruit has been developed to overcome the problem of necrosis in Actinidia arguta explants. The system uses Agrobacterium tumefaciens strain EHA105 harbouring the binary vector pART27-10 to inoculate leaf strips. The vector contains neomycin phosphotransferase (nptII) and ${\beta}$-glucuronidase (GUS) (uidA) genes. A range of light intensities and different strengths of Murashige and Skoog (MS) basal salt media was used to overcome the problem of browning and/or necrosis of explants and calli. Callus browning was significantly reduced, resulting in regenerated adventitious shoots when the MS basal salt concentration in the culture medium was reduced to half-strength at low light intensity ($3.4\;{\mu}mol\;m^{-2}\;s^{-1}$) conditions. Inoculated leaf strips produced putative transformed shoots of Actinidia arguta on half-MS basal salt medium supplemented with 3.0 $mg\;l^{-1}$ zeatin, 0.5 $mg\;l^{-1}$ 6-benzyladenine, 0.05 $mg\;l^{-1}$ naphthalene acetic acid, 150 $mg\;l^{-1}$ kanamycin and 300 $mg\;l^{-1}$ $Timentin^{(R)}$. All regenerated plantlets were deemed putativ transgenic by histochemical GUS assay and polymerase chain-reaction analysis.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.92-92
• /
• 2018

Silene seulensis Nakai was used as traditional medicines in Korea, we collected plant from demilitarized zone (DMZ). S. seulensis was extracted with 30, 50, and 70% ethanol and partitioned successively with n-hexane, EtOAc, dichloromethane and BuOH. These extracts (30, 50 and 70% ethanol) were evaluated the cytotoxicity on B16F10 and Hacat cell lines. The LC-MS/MS data of each fractions (n-hexane, EtOAc, dichloromethane, and BuOH) were compared with MS library, combined with ultraviolet/visual (UV/Vis) and MS data for faster determine structure by database search results. This led to the identification of four compounds (1-4) from S. seulensis. These compounds was isolated first time from S. seulensis. Their chemical structures are elucidated by combinations of NMR and mass spectrometry techniques.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.2
• /
• pp.47-53
• /
• 2002

Ocean surface wind speed was estimated using TRMM (Tropical Rainfall Measurement Mission) TMI (TRMM Microwave/Imager) data. It is used the TRMM TMI brightness temperature and National Data Buoy Center's buoy winds speed dataset near North-America to estimate by the algorithm of the ocean surface wind speed retrieval over North America. Comparing with the buoy data by D-matrix equation, the result that RMSE, BIAS, and correlation coefficient are 2.19 $ms^{-1}$, 1.10 $ms^{-1}$, and 0.81, respectively. Therefore the estimated oceanic surface wind speed by TRMM TMI brightness temperature data show that available to ocean research over upper ocean.

• International Journal of Concrete Structures and Materials
• /
• v.9 no.3
• /
• pp.323-335
• /
• 2015

This paper examines some properties of concrete, such as strength, oxygen permeability and sorptivity using starch [cassava (CA) and maize (MS)] as admixtures. Concrete cubes containing different percentages of the CA and MS by weight of cement (0, 0.5, 1.0, 1.5 and 2.0 %) were cast. Compressive strength tests were carried out after 3, 7, 14, 21, 28, 56, 90, 180, 270 and 365 days of curing. Oxygen permeability and sorptivity tests were carried out on another set of concrete specimens with the same percentages of starch at 7, 28, 90, 180, 270 and 365 days. Oxygen permeability and sorptivity tests data obtained were subjected to Kruskal-Wallis one-way analysis of variance by ranks. The strength increase after 1 year over the control for CA 0.5 and CA 1.0 are 2.7 and 3.8 % respectively, while MS 0.5 and MS 1.0 gave 1.5 % increase over control. These results showed a decrease in oxygen permeability and rates of sorptivity, with concretes containing starch as admixtures giving better performance than the control concretes.

• Plant Biotechnology Reports
• /
• v.4 no.4
• /
• pp.261-267
• /
• 2010

We describe culture conditions for a high-efficiency in vitro regeneration system of Papaver nudicaule through somatic embryogenesis and secondary somatic embryogenesis. The embryogenic callus induction rate was highest when petiole explants were cultured on Murashige and Skoog (MS) medium containing 1.0 mg $1^{-1}$ ${\alpha}$-naphthaleneacetic acid (NAA) and 0.1 mg $1^{-1}$ 6-benzyladenine (BA) (36.7%). When transferred to plant growth regulator (PGR)-free medium, 430 somatic embryos formed asynchronously from 90 mg of embryogenic callus in each 100-ml flask. Early-stage somatic embryos were transferred to MS medium containing 1.0 mg $1^{-1}$ BA and 1.0 mg $1^{-1}$ NAA to germinate at high frequency (97.6%). One-third-strength MS medium with 1.0% sucrose and 1.0 mg $1^{-1}$ $GA_3$ had the highest frequency of plantlet conversion from somatic embryos (91.2%). Over 90% of regenerated plantlets were successfully acclimated in the greenhouse. Secondary somatic embryos were frequently induced directly when the excised hypocotyls of the primary somatic embryos were cultured on MS medium without PGRs. Sucrose concentration significantly affected the induction of secondary embryos. The highest induction rate (89.5) and number of secondary somatic embryos per explant (9.3) were obtained by 1% sucrose. Most secondary embryos (87.2-94.3%) developed into the cotyledonary stage on induction medium. All cotyledonary secondary embryos were converted into plantlets both in liquid and on semisolid 1/3-strength MS medium with 1.0% sucrose.

• Journal of Acupuncture Research
• /
• v.28 no.2
• /
• pp.89-95
• /
• 2011

Objectives : The purpose of this study was to investigate the composition of Rehmannia glutinosa's essential oils with Rehmanniae Radix herbal acupuncture Methods : I obtained the essential oils of Rehmannia Radix by hydrodistillation extraction method and supercritical fluid extraction(SFE) method, and then I analyzed those by GC/MS(gas chromatography/mass spectrum). Results : 1. With GC(gas chromatography) and GC/MS(gas chromatography/mass spectrum) analysis. I identified 9 compounds in the Rehmanniae Radix's essential oil obtained through the SFE method. The main compounds were as follows : Hexachloroethane(2.24%), N-Butyl-benzenesulfonamide(2.05%), hexadecanoic acid(1.93%), hexadecanoic acid, ethyl ester(3.49%), 9,12-Octadecadienoic acid(z,z)(2.70%), (9E)-9-Octadecenoic acid(6.14%), ethyl linoleate(4.43%), ethyl oleate(5.80%). 2. I failed to get Rehmanniae Radix's essential oil obtained through the hydrodistillation method. 3. With GC(gas chromatography) and GC/MS(gas chromatography/mass spectrum) analysis. I identified 4 compounds in the Rehmanniae Radix's essential oil obtained through the hydrodistillation method. The main compounds were as follows : Ethylbis(trimethylsilyl)amine(1.04%), 2-(Trimethylsiloxy)benzoic methyl ester(2.65%), Hexadecanoic acid trimethylsilyl ester(12.61%), octadecanoic acid, trimethylsilyl ester(6.28%). Conclusions : The substances by hydrodistillation method may not perfectly match with the substances by supercritical fluid extraction(SFE) method in essential oils extracted form Rehmanniae Radix. But, the main substances was assumed Hexadecanoic acid and octadecanoic acid.

• Korean Journal of Microbiology
• /
• v.37 no.1
• /
• pp.66-71
• /
• 2001

An aerobic microbiological process was tested in 1.5 L stirred tank reactors for the treatment of dinitrotoluenes (DNTs)[e.g., 2.4-dinitrotoluene (2,4-DNT), 2,6-dinitrotoluene (2,6-DNT)] in the test culture of Stenotrophomonas maltophilia, which had previously characterized. Both 2,4-DNT and 2,6-DNT were completely degraded within 10 days and 14 days of incubation, respectively. Addition of the secondary carbon was essential to degrade DNTs, and little degradation was achieved in the absence of the secondary carbons. The effect of additional nitrogens on the degradation of DNTs was evaluated. Complete degradation of DNTs was observed in the absence of any additional nitrogens, whereas DNTs were partially degraded in the growth media with additional nitrogens. Both HPLC and GC-MS were used to detect and verify the residual DNTs and their intermediates. As the results, the HPLC and GC-MS chromatograms demonstrated that the both parent compounds, 2, 4-DNT and 2,6-DNT, and respective intermediates, 2-amino-4-nitrotoluene and 2-amino-6-nitrotoluene, could be successfully identified under the analytical conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.4
• /
• pp.303-309
• /
• 2013

A low power 6-bit flash ADC that uses an input voltage range detection algorithm is described. An input voltage level detector circuit has been designed to overcome the disadvantages of the flash ADC which consume most of the dynamic power dissipation due to comparators array. In this work, four digital input voltage range detectors are employed and each input voltage range detector generates the specific clock signal only if the input voltage falls between two adjacent reference voltages applied to the detector. The specific clock signal generated by the detector is applied to turn the corresponding latched comparators on and the rest of the comparators off. This ADC consumes 68.82mW with a single power supply of 1.2V and achieves 4.9 effective number of bits for input frequency up to 1MHz at 500 MS/s. Therefore it results in 4.75pJ/step of Figure of Merit (FoM). The chip is fabricated in 0.13-um CMOS process.

• Metals and materials international
• /
• v.24 no.6
• /
• pp.1333-1345
• /
• 2018

The effect of manganese sulfide (MnS) inclusions on the machinability of free-cutting steel is based on their morphology, size and distribution. Furthermore, the plasticity of MnS is high during the hot working caused different characterization of MnS. In this study, the deformation behavior of MnS in 1215MS steel after a thermomechanical process was investigated at 1323 K. The microstructures of MnS inclusions were characterized by optical microscopy, scanning electron microscopy, energy-dispersive spectrometry, and electron backscattering diffraction (EBSD). As the thickness reduction of the inclusions increased from 10 to 70%, their average aspect ratio increased from 1.20 to 2.39. In addition, the deformability of MnS inclusions was lower than that of the matrix. The possible slip systems of A, B, C, and D plane traces were (${\bar{1}}0{\bar{1}}$)[${\bar{1}}01$], ($10{\bar{1}}$)[101], (011)[$01{\bar{1}}$], and (110)[$1{\bar{1}}0$]. Furthermore, the EBSD measurements suggested that slip planes in MnS inclusions occur on {110} planes.