• 제목/요약/키워드: 1A25

검색결과 43,270건 처리시간 0.07초

표면균열무해화 기법에 의한 SKD61의 신뢰성 향상 (Improving Reliability of SKD61 Using Nondamaging Technology)

  • 이금화;구경희;김재훈;윤서현;권영국;남기우
    • 한국산업융합학회 논문집
    • /
    • 제25권5호
    • /
    • pp.791-797
    • /
    • 2022
  • Using the fatigue limit (△σunsm) and residual stress (σr) of the UNSM smooth specimen, the harmless maximum crack depth (αhml) according to the crack aspect ratio (As) was evaluated. αhml evaluated the reliability in the relationship between the minimum crack depth (αNDI1, αNDI2) detectable by nondestructive inspection(NDI) and the crack depth (α25, α50) that reduces the fatigue limit by 25% and 50%. All αhml was determined by the crack depth. The αhml of 80N UNSM with high σr and high △σunsm was found to be large. σr in the depth direction had a much effect on αhml. Since αhml50(As=0.6-0.1) and αhml25, α25 and α50(some range) can secure the safety and reliability. Since αhml50 (As=1. 0-0. 6), it cannot be made harmless by UNSM. So safety and reliability cannot be secured. αNDI1 and αNDI2 are larger than α25, α25 cannot be detected by NDI. αNDI1 and αNDI2 are smaller than α50, α25 can detected by NDI.

2.5V, 0.25$\mu\textrm{M}$ CMOS 공정을 이용한 채널당 1Gbps로 동작하는 10채널 병렬 광 수신기의 설계 (A 2.5-V,1-Gb/s/ch Parallel Optical Receiver in 0.25mm CMOS Technology)

  • 정성재;김형수;김두근;최영완
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
    • /
    • pp.180-181
    • /
    • 2001
  • 이 논문은 채널당 1Gbps로 동작하는 10채널 광 수신기를 0.25$mu extrm{m}$ CMOS공정을 이용하여 설계한 것이다. 광 수신기는 크게 2부분으로 나눠지는데 첫 번째 부분은 입력된 전류 신호를 전압 신호로 변환시켜주는 역할을 하는 트랜스임피던스 전치증폭기이고, 다음 부분은 원하는 디지털 레벨로 풀스윙 할 수 있도록 하는 후치증폭기이다. 전치증폭기의 출력 전압은 스윙폭에 무관하게 그 다음 단에서 적당한 디지털 레벨 데이터로 변환되어야한다. (중략)

  • PDF

고속 적외선 광 송수신 IC 설계 (A Design of High Speed Infrared Optical Data Link IC)

  • 임신일;조희랑;채용웅;유종선
    • 한국통신학회논문지
    • /
    • 제26권12B호
    • /
    • pp.1695-1702
    • /
    • 2001
  • 본 논문에서는 4 Mb/s 부터 100 Mb/s 의 IrDA(Infrared Data Association) 응용이 가능한 CMOS infrared (IR) wireless data link IC의 설계 방법에 대해 기술한다. 이 모듈은 60 dB에서 100 dB가지의 이득 범위를 가지는 variable gain transimpedance amplifier, AGC(automatic gain control) 회로, AOC(automatic offset control) loop, 4 PPM (pulse position modulation) modulator/demodulator와 DLL(delay locked loops)로 구성된다. 본 적외선 광송수신 IC는 0.25 um 1-poly 5-metal CMOS 공정을 이용하여 제작되었다. 2.5 V 전원 전압에서 동작시켰으며 100 Mb/s에서 출력단 버퍼를 제외하고 25 mW의 진력을 소모한다. 칩의 크기는 1.5 mm $\times$ 1 mm이다.

  • PDF

Multi-Harmonic Matching Network을 이용한 동시-이중 대역 Class-E 전력 증폭기 (Concurrent Dual-Band Class-E Power Amplifier Using a Multi-Harmonic Matching Network)

  • 박승원;전상근
    • 한국전자파학회논문지
    • /
    • 제25권4호
    • /
    • pp.401-410
    • /
    • 2014
  • 본 논문에서는 1.3 GHz와 2.1 GHz에서 소형화된 multi-harmonic matching network(MHMN)을 사용한 고효율 동시-이중대역 Class-E 전력 증폭기를 제안한다. 제안하는 구조는 스위치 혹은 집중 소자를 사용하지 않고, transmission line만을 이용하여 1.3 GHz과 2.1 GHz 그리고 각각의 2차 및 3차 고조파의 임피던스를 조절하였다. 능동 소자로는 Avago ATF-50189 GaAs p-HEMT가 사용되었다. 제작된 전력증폭기는 입력 전력이 21 dBm일 때 1.3 GHz와 2.1 GHz에서 각각 27.1 dBm, 25.7 dBm의 출력과, 6.1 dB, 4.7 dB의 전력 이득, 그리고 71.2 %, 60.1 %의 드레인 효율 특성을 나타내었다.

강 및 탄소 섬유를 사용한 하이브리드 섬유보강 모르타르의 압축·휨성능 향상 (Improved Compressive·Flexural Performance of Hybrid Fiber-Reinforced Mortar Using Steel and Carbon Fibers)

  • 허광희;박종건;서동주;고성곤
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제25권5호
    • /
    • pp.48-59
    • /
    • 2021
  • 본 연구에서는 다른 재료특성을 갖는 강섬유 또는 탄소섬유만을 사용한 단일 섬유보강 모르타르(fiber-reinforced mortar, FRM)와 강 및 탄소 섬유를 혼합사용한 하이브리드 FRM의 압축·휨성능을 조사하기 위해 실험을 수행하였다. 모르타르 시편은 총 섬유혼입률 1.0%에서 부피에 의한 1+0%, 0.75+0.25%, 0.5+0.5%, 0.25+0.75% 및 0+1%의 혼합비율로 강섬유와 탄소섬유를 혼입하였다. 이들의 역학적 성능을 재령 28일에서 섬유가 없는 플레인 모르타르와 비교, 검토하였다. 모르타르의 실험결과는 강섬유 0.75% + 탄소섬유 0.25%를 혼합사용한 하이브리드 FRM가 가장 높은 압축강도와 휨강도를 나타내, 하이브리드 FRM의 시너지 보강효과를 확인할 수 있었다. 반면, 강섬유 0.5% + 탄소섬유 0.5%를 혼합사용한 하이브리드 FRM의 경우 가장 높은 휨인성을 얻었으며, 본 실험결과를 토대로 강도와 휨인성을 동시에 개선하기 위한 하이브리드 FRM의 최적의 섬유 혼합비율을 제시하였다. 게다가, FRM 시편의 이미지 분석을 위해 주사전자현미경(scanning electron microscope, SEM)을 통해 파단면을 관찰하였다. 이들 결과는 시멘트 매트릭스 내에서 하이브리드 보강섬유의 이미지 분석을 하는 데 큰 도움이 되었다.

Effects of Bacillus SW1-1 coated diets on innate immunity and disease resistance of olive flounder Paralichthys olivaceus against Edwardsiella tarda infection

  • Kim, Min-Gi;Gunathilaka, Buddi E.;Lee, Sungho;Kim, Youjeong;Lee, Kyeong-Jun
    • Fisheries and Aquatic Sciences
    • /
    • 제25권4호
    • /
    • pp.243-249
    • /
    • 2022
  • Bacillus SW1-1 is a probiotic isolated from shrimp intestines. We investigated the effects of Bacillus SW1-1 coated diets on the growth, feed utilization, innate immunity, hematological parameters and resistance to Edwardsiella tarda in olive flounder (Paralichthys olivaceus). A commercial diet was used as the control (AP0) and two other diets were prepared by coating 0.25% (AP25) or 0.50% (AP50) probiotic powder which contains 1.0 × 107 CFU/g Bacillus SW1-1. Four replicate groups of olive flounder (153 ± 2 g) were fed one of the diets for 12 weeks. Growth performance and feed utilization of the fish were not significantly affected by the dietary Bacillus SW1-1. After the challenge with E. tarda, AP50 group showed significantly higher survival than AP0 and AP25 groups. Innate immunity and anti-oxidant capacity of the fish were not significantly affected after the feeding trial. However, after the E. tarda challenge, the innate immune parameters (immunoglobulin, lysozyme and anti-protease) were significantly improved in fish fed AP25 and AP50 diets compared to those in fish fed AP0 diet. After the challenge test, significantly lower glucose level was observed in AP50 group compared to AP0 group. These results indicate that dietary supplementation of Bacillus SW1-1 could increase the disease resistance of olive flounder against E. tarda infection. The optimum coating levels of Bacillus SW1-1 needs to be further elucidated.

A 0.25-$\mu\textrm{m}$ CMOS 1.6Gbps/pin 4-Level Transceiver Using Stub Series Terminated Logic Interface for High Bandwidth

  • Kim, Jin-Hyun;Kim, Woo-Seop;Kim, Suki
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
    • /
    • pp.165-168
    • /
    • 2002
  • As the demand for higher data-rate chip-to-chip communication such as memory-to-controller, processor-to-processor increases, low cost high-speed serial links\ulcorner become more attractive. This paper describes a 0.25-fm CMOS 1.6Gbps/pin 4-level transceiver using Stub Series Terminated Logic for high Bandwidth. For multi-gigabit/second application, the data rate is limited by Inter-Symbol Interference (ISI) caused by channel low pass effects, process-limited on-chip clock frequency, and serial link distance. The proposed transceiver uses multi-level signaling (4-level Pulse Amplitude Modulation) using push-pull type, double data rate and flash sampling. To reduce Process-Voltage-Temperature Variation and ISI including data dependency skew, the proposed high-speed calibration circuits with voltage swing controller, data linearity controller and slew rate controller maintains desirable output waveform and makes less sensitive output. In order to detect successfully the transmitted 1.6Gbps/pin 4-level data, the receiver is designed as simultaneous type with a kick - back noise-isolated reference voltage line structure and a 3-stage Gate-Isolated sense amplifier. The transceiver, which was fabricated using a 0.25 fm CMOS process, performs data rate of 1.6 ~ 2.0 Gbps/pin with a 400MHB internal clock, Stub Series Terminated Logic ever in 2.25 ~ 2.75V supply voltage. and occupied 500 * 6001m of area.

  • PDF

Electrodeposition 변수에 따른 Trench Via의 Cu Filling 특성 (Cu Filling Characteristics of Trench Vias with Variations of Electrodeposition Parameters)

  • 이광용;오택수;오태성
    • 마이크로전자및패키징학회지
    • /
    • 제13권4호
    • /
    • pp.57-63
    • /
    • 2006
  • 칩 스택 패키지의 삼차원 interconnection에 적용을 위해 폭 $75{\sim}10\;{\mu}m$, 길이 3mm의 트랜치 비아에 대해 전기도금전류밀도 및 전류모드에 따른 Cu filling 특성을 분석하였다. 직류모드로 $1.25mA/cm^{2}$에서 Cu filling한 경우, 트랜치 비아의 폭이 $75{\sim}35{\mu}m$ 범위에서는 95% 이상의 높은 Cu filling ratio를 나타내었다. 직류 전류밀도 $2.5mA/cm^{2}$에서 Cu filling한 경우에는 $1.25mA/cm^{2}$ 조건에 비해 열등한 Cu filling ratio를 나타내었으며, 직류모드에 비해 펄스모드가 우수한 Cu filling 특성을 나타내었다.

  • PDF

시력 취약 계층을 위한 신용 카드 번호 인식 연구 (Credit Card Number Recognition for People with Visual Impairment)

  • 박다훈;권건우
    • 전기전자학회논문지
    • /
    • 제25권1호
    • /
    • pp.25-31
    • /
    • 2021
  • 일반적인 신용카드 번호 인식 시스템은 정해진 위치에 카드를 배치했을 때에만 올바르게 동작하도록 설계되어 있다. 본 논문은, 저시력 장애인을 포함한 시력 취약 계층에게 보다 쉬운 사용자 경험을 제공하기 위해, 신용카드 내 16자리 숫자의 종횡비 특징을 이용한 자동 번호 인식 알고리즘을 제안한다. 제안하는 알고리즘은 형태학 연산을 통해 종횡비가 4:1 이상인 이미지 후보군을 찾고, 각각의 후보에 OCR과 BIN 번호 매칭 기술을 적용하여 신용카드 번호를 획득한다. OpenCV 및 Firebase ML에 기반한 실험 결과, 카드를 정해진 위치에 두지 않아도 77.75% 정확도로 카드 번호를 인식하였다.

새뱅이 ( Caridina denticulata denticulata De Haan ) 의 유생 발생을 통한 수종 살충제 독성에 관한 연구 (A study on toxicity of several pesticides on larval development of shrimp cardina denticulata denticulata de haan)

  • Kim, Chang-Hyun
    • The Korean Journal of Ecology
    • /
    • 제15권3호
    • /
    • pp.257-265
    • /
    • 1992
  • The effects of insecticide dimilin including the technical grade(tg) and wettable power(wp-25), inhibiting the synthesis of chitin in the cuticle of insect larvae, and herbicides alachlor and atrazine on the development of shrimp caridina denticulata denticulata were investigated in various concentrations. This species is abundant in the freshwater such as river and pond. The shrimp larvae were reared at dimilin solutions(tg and wp 2), alachlor solutions, and atrazin solutions. the concentrations of dimiline were 0, 1, 5, 10 and 25 ppb dimilin solutions, and those of alachlor and atrazin were 0, 1, 5, 10 and 25ppm, respectively.mortality was high at 10 ppb when the larvae were exposed to dimilin and at 25ppm in the case of alachlor and atranzine solutions. If lethal concentration is defined as a concentration in which less than 10% of larvae to the post larval stage from hatching it can be concluded that the lethal concentration of dimilin is 5ppb, and that of alachlor and atrazin is 25 ppm.

  • PDF