• 한국수자원학회논문집
• /
• 제36권2호
• /
• pp.285-300
• /
• 2003

기상레이더와 지형정보 시스템을 이용한 홍수사상에 기초하고, 운동역학적이며, 초과강우가 고려된 분포형 강우-유출 유역모형이 개발되었다. 이 유역모형에서 강우로 인한 지표면 유출 및 지표면 흐름과 관련된 각종 변수의 공간적 변동성과 불확실성을 인식하고 설명한다. 개발된 모형은 래스터 지형정보시스템과 공간적ㆍ시간적으로 변하는 강우자료와 호환된다. 몬테칼로 모의와 우도값이 이 모형의 검정을 위하여 이용되었으며, 검정 모형으로부터 반응되는 시스템의 가능범위가 허용되었다. 레이더-강우 추정에 대한 보정으로 강우계가 이용되고, 복잡한 토지이용 상태인 미국 덴버시 도시배수홍수조절 구역내에 있는 두 개 유역들(Ralston Creek와 Goldsmith Gulch 유역)의 제한된 기왕 홍수사상에 이 모형이 적용되었다. 제한된 수의 몬테칼로 모의들과 고려된 홍수사상들을 근거로 관측수문곡선과 계산수문곡선을 비교하여, Nash와 Sutcliffe 효율점수의 범위를 얻게 되었으며, 그 범위는 Ralston Creek과 Goldsmith Gulch 유역에 대한 검정모형들로부터 각각 -0.19∼0.95와 -0.75∼0.81이다. 또 한, Ralston Creek과 Goldsmith Gulch 유역의 Nash와 Sutcliffe 효율점수는 유출용적에 대해 각각 0.88과 0.1, 첨두유량에 대해 0.14와 0.71, 첨두유량 도달시간에 대해 0.99와 0.95로 평가되었다.

• 한국수자원학회논문집
• /
• 제38권6호
• /
• pp.495-504
• /
• 2005

본 연구의 목적은 HSPF 모형과 Landsat 영상을 이용하여 토지피복 변화에 따른 유출의 변화를 분석하는 것이다. 토지피복도는 경안수위관측소 상류유역($258km^2$)에 대하여 10년 단위로 3개의 토지피복도(1980, 1990, 2000)를 준비하였다. HSPF의 수문학적 인자들의 보정에는 1999년부터 2000년의 경안수위관측소의 자료를 사용하였고, 검증에는 2001년과 2003년의 자료를 사용하였다. 토지피복도를 입력자료로 한 유출변화의 모의 결과, 20년 동안의 산림 감소 ($15.0\;km^2$)와 도심지 증가($19.3\;km^2$)에 따라 총유출량과 첨두유량이 증가하였다. 총유출량은 풍수년(2003, 1709.4mm)과 갈수년(2001, 871.2mm)의 강수조건에서 각각 $0.6\%,\;1.0\%$의 증가율을 보였다. 첨두유량은 2000년의 최대강우강도 241.3mm/hr 조건에서 $13.3\%$의 증가를 보였고, 성수기와 비성수기로 구분한 총유출량은 평수년(2000, 1257.3mm)인 2000년 강수조건에서 각각 $4.4\%$ 증가와 $8.1\%$ 감소로 가장 큰 변화를 보였다.

• 지역사회간호학회지
• /
• 제4권1호
• /
• pp.67-76
• /
• 1993

The purpose of this study was to find the status of health examination and health management of industrial companies located in Taegu and Kyung book areas. It will provide basic information for the provision of effective health management of industrial workers. 49 companies were selected as a study sample group, and data was collected by using a structured Questionnaire which was developed by the members of the Community Health Nursing Academy of Korean Nursing. The health managers of the companies filled out the Questionnaire. The data was gathered from Dec 20, 1992 to Jan 20. The results of the study was as follows : 1. The Study sample showed 85.7% manufacturing companies having 300 or more workers. 2. All the companies had health managers, and companies which had 1,000 or more workers had industrial physicians and nurses. Only 12.2% of the industrial physicians were full time employees, and almost all industrial nurses were full time employees. Except for industrial physicians and nurses, the proportion of hygienists (6.1%), nurses aids (4.1%), and environmental engineers (22.4%) with full time employment statuss was very low. The mean age of industrial physicians was 49.2 while that of industrial nurses was 27.2. The length of work experiences currently ranges for 1 to 3 years for all health workers: physicians, nurses, hygienists, and environmental engineers. 3. Health examination and follow up care 94.31% took general health examinations. Of those, the proportion of the workers, who were determined as C grade(in need of close examination) was 43.86%. The proportion of the workers who were determined as D grade was 22.19%. 13.28% of the workers evaluated at the D grade were taken as a gauge for temporary leave from work. While 8.7% and .09% of them were taken as gauge for a change in job, and or shortening work hours respectively. The proportion of workers who must have taken special examination was 65.04% and of those the proportion of the workers who actually took, the examination was 98.55%. 75% of the workers who were recommended for follow up care were given follow up care. The special examinations were done the most frequently to detect the effects of physical agents (59.2%). Direct notice to individual workers was used the most frequently as a method of notification after a special examination (61.2%). The length of time taken to receive the result of a special examination was less than 1 month (38.9%) and 36.7% had taken up to two months (36.7%.). Most results of special examination were obtained within 2 months. The referral rate of consulting special examination by health managers was estimated at 95.9%. 4. 89.8% of the companies had. their own company dispensaries and 75.5% of those. had separate dispensaries. 32.7% of the companies designated local clinics for health management of workers. Industrial nurses performed health examination the most frequently(1.4 points). Health appraisal for work places were. done the least(0.83 points).

• 대한치과보철학회지
• /
• 제41권6호
• /
• pp.720-731
• /
• 2003

Statement of problem. The importance of fixture design and surface treatment. Purpose. The clinical success of dental in plants is affected by many factors such like as degree of osseointegration, the effective load dispersion for the prostheses, and a lot of attempts have been made to overcome the difficulties. In this study, efforts were made to find the possibility of clinical acceptance of the dental implants of newly designed surface and resorbable blast media surcace. Materials and methods. In this study, two groups of custom-made, screw-shaped implants were prepared. The first with the consisting of Branemark clone design and the other with the new design. These implants were divided into four groups according to the kinds of surface treatment. Four implants($AVANA^{(R)}$, Osstem, Busan, Korea)of each group were installed in twenty rabbits. Group A was consisted of Branemark done implant left as machined, Group B with Branemark clone implants with RBM(Resorbable blast media) surface, Group C with newly designed implants left as machined and Group D with newly designed implants with RBM surface. One of the twenty rabbits died from inflammation and the observation was made for six weeks. Specimens from four groups were observed using scanning electron microscopy with 40, 100, 1000 magnification power and microsurface structures were measured by white-light scanning interferometry for three dimensional surface roughness measurements(Accura $2000^{(R)}$, Intek-Plus, Korea.). Removal torque was measured in 17 rabbits using digital torque gauge(MGT 12R, Mark-10 corp., NY, U.S.A.) immediately after the sacrifice and two rabbits were used for the histologic preparation(EXAKT $310^{(R)}$, Heraeus Kulzer, wehrheim, Germany) of specimens and observed under light microscope. Resonance frequency measurement($Osstell^{(R)}$) was taken with the 19 rabbits at the beginning of the implant fixation and immediately after the sacrifice. Results. Following results were taken from the experiment. 1. The surface of the RBM implants as seen with SEM had rough and irregular pattern with reticular formation compared to that of fumed specimens showing different surface topographies. 2. The newly designed implant with RBM surface had high removal torque value among four groups with no statistical significance. The average removal torque was $49.95{\pm}6.70Ncm$ in Group A, $51.15{\pm}4.40Ncm$ in Group B, $50.78{\pm}9.37Ncm$ in Group C, $51.09{\pm}4.69Ncm$ in Group D. 3. The RFA values were $70.8{\pm}4.3Hz$ in Group A, $71.8{\pm}3.1Hz$ in Group B, $70.9{\pm}2.5Hz$, $72.7{\pm}2.5Hz$ in Group D. Higher values were noted in the groups which had surface treatment compared to the untreated groups with no statistical significance. 4. The results from the histomorphometric evaluation showed a mean percentage of bone-to-implant contact of $45{\pm}0.5%$ in Group A, $55{\pm}3%$ in Group B, $49.5{\pm}0.5%$ in Group C, and $55{\pm}3%$ in Group D. Quite amount of newly formed bone were observed at the surface RBM-treated implants in bone marrow space.

• Journal of Biosystems Engineering
• /
• 제36권2호
• /
• pp.79-88
• /
• 2011

The purpose of this study was to analyze power requirement of an agricultural tractor by major field operations. First a survey was conducted to obtain annual usage ratio of agricultural tractor by field operation. Plowing, rotary tillage, and loader operations were selected as major field operations of agricultural tractor. Second, a power measurement system was constructed with strain-gauge sensors to measure torque of four driving axles and a PTO axle, speed sensors to measure rotational speed of the driving axles and an engine shaft, pressure sensors to measure pressure of hydraulic pumps, an I/O interface to acquire the sensor signals, and an embedded system to calculate power requirement. Third, the major field operations were experimented under fields with different soil conditions following planned operation paths. Power requirement was analyzed during the total operation period consisted of actual operation period (plowing, rotary tillage, and loader operations) and period before and after the actual operation (3-point hitch operating, forward and reverse driving, braking, and steering). Power requirement of tractor major components such as driving axle part, PTO part, main hydraulic part, and auxiliary hydraulic part were measured and calculated to determine usage ratio of agricultural tractor power. Results of averaged power requirement for actual field operation and total operation were 23.1 and 17.5 kW, 24.6 and 19.1 kW, and 14.9 and 8.9 kW, respectively, for plowing, rotary tillage, and loader operations. The results showed that rotary tillage required the greatest power among the operations. Averaged power requirement of driving axles, PTO axle, main hydraulic part, and auxiliary part during the actual field operation were 8.1, 7.8, 3.4, and 1.5 kW, respectively, and the total requirement power was about 70 % (20.8 kW) of the rated power. Averaged power requirement of driving axles, PTO axle, main hydraulic, and auxiliary hydraulic for the total operation period were 6.5, 6.0, 2.1, 0.9 kW, respectively, and total requirement power was about 52 % (15.5 kW) of the rated power. Driving axles required the greatest amount of power among the components.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.107-107
• /
• 2012

3종 복합소재인 양모와 나일론, 레이온의 염색공정은 먼저 알칼리 욕에서 반응성염료로 레이온을 염색한 후, 산성욕에서 산성염료로 양모와 나일론을 염색하는 것이 일반적이다. 그런데 양모, 나일론, 레이온은 알칼리에 민감하므로 면 염색 시 적용되는 강알칼리인 수산화나트륨을 사용하면 섬유의 취화로 인하여 강도와 촉감저하 등의 문제가 발생하게 된다. 따라서 본 연구에서는 알칼리 중 탄산나트륨과 중탄산나트륨을 사용하여 염료를 투입하지 않고 염색공정을 거친 후 백도와 인장강도를 측정하여 황변 및 강도 변화 여부를 알아보았다. 레이온 70%, 양모 19%, 나일론 11%의 혼용율을 가지는 전처리 된 편물(130$g/m^2$, 32 inch, 18 gauge)에 탄산나트륨(시약 1급) 20g/l과 중탄산나트륨(시약 1급) 20g/l 각각을 투입하고 반응성염색공정($60^{\circ}C$, 60 min)으로 처리한 경우와 반응성 염색 후 산성염색공정($98^{\circ}C$, 60 min)으로 처리한 경우로 나누어 측색을 통해 백도와 L, a, b값을 측정하고 KS K 0521에 따라 인장강도 시험을 실시하였다. 그 결과, 탄산나트륨 투입시 백도 값이 중탄산나트륨에 비해 10% 정도 낮아지고 L, a, b값도 상대적으로 yellow 방향으로 이동해 있는 것으로 나타났다. 이것은 황변이 일어남을 의미하며 육안으로 확인하였다. 또한 인장강도 측정결과를 통해 소다회 처리 시 중조에 비해 30% 정도의 강도 저하가 일어남을 확인할 수 있었다. 그러나 반응성염색 후 산성염색을 거치게 되면 황변과 강도 저하 현상이 회복되는 경향을 나타내었다. 즉, 천연/나일론 편물을 반응성염색 시 알칼리로 탄산나트륨을 사용하면 염색공정 상에서 중탄산나트륨에 비해 황변이 일어나 염료 고유의 색상 발현에 영향을 줄 수 있고 강도 또한 30% 정도 저하되지만, 후에 산성염색 공정을 거치면 산 조건과 욕중 효과를 통해 일부 개선됨을 확인하였다. 이와 별도로 이번에는 시판되는 반응성염료 5종과 산성염료 3종을 조합하여 탄산나트륨과 중탄산나트륨 투입에 따른 염색실험을 실시하고 측색(DataColor SF600 광원D65, Strength)을 통해 염착량을 비교하였다. 그 결과, 중탄산나트륨으로 염색하면 탄산나트륨에 비해 모두 염착량이 저하되었으며, 염료의 구조적 차이와 컬러별로도 그 차이는 다양하였다. 그 중 저온에너지형 반응성염료는 탄산나트륨 투입에 비해 47~60% 정도로 가장 양호하였으며, 일부 반응성염료는 20%까지 떨어지는 값을 나타내었다. 이것은 탄산나트륨보다 중탄산나트륨의 알칼리 정도가 낮으므로 반응성염료의 염착이 적은 것으로 생각되며, 저에너지형 반응성염료의 경우에는 낮은 온도나 알칼리 조건에서도 상대적으로 높은 고착률을 나타내므로 적절한 반응성염료의 선택을 통해 그 차이를 극복할 수 있을 것으로 사료된다. 이상의 결과를 통해 탄산나트륨과 중탄산트륨의 알칼리 정도가 강도와 염착량에 미치는 영향의 차이를 고려하여 최적의 현장 처방을 선정해야 함을 알 수 있었다.

• 구강회복응용과학지
• /
• 제19권1호
• /
• pp.17-25
• /
• 2003

Treatment with implants of single tooth missing cases is both functional and esthetic. Although the success rate of single-tooth implant treatments is increasing, sometimes it makes some problems. Problems with single-tooth implant treatments include soft tissue complications, abutment screw fracture, and most commonly, abutment screw loosening, and these involve the instability of the dental implant-superstructure interface. This study investigated and compared dental implant screw joint micromotion of various implant system with external connection or internal connection when tested under simulated clinical loading, Six groups (N=5) were assessed: (1) Branemark AurAdapt (Nobel Biocare, Goteborg, Sweden), (2) Branemark EsthetiCone (Nobel Biocare, Goteborg, Sweden), (3) Neoplant Conical (Neobiotec, Korea), (4) Neoplant UCLA (Neobiotec, Korea), (5) Neoplant 5.5mm Solid (Neobiotec, Korea), and (6) ITI SynOcta (Institute Straumann, Waldenburg, Switzerland). Six identical frameworks were fabricated. Abutment screws were tightened to 32-35 Ncm and occlusal screw were tightened to 15-20 Ncm with an electronic torque controller. A mechanical testing machine applied a compressive cyclic load of 20kg at 10Hz to a contact point on each implant crown. Strain gauge recorded the micromotion of the screw joint interface once a second. Data were selected at 1, 500, 5,000, 10,000, 20,000, 30,000, 40,000 and 50,000 cycle and 2-way ANOVA test was performed to assess the statistical significance. The results of this study were as follows; The micromotion of the implant-superstructure in the interface increased gradually through 50,000 cycles for all implant systems. In the case of the micromotion according to cycle increase, Neoplant Conical and Neoplant UCLA system exhibited significantly increasing micromotion at the implant-superstructure interface (p<0.05), but others not significant. In the case of the micromotion of the implant-superstructure interface at 50,000 cycle, the largest micromotion were recorded in the Branemark EsthetiCone, sequently followed by Neoplant Conical, Neoplant UCLA, Branemark AurAdapt, ITI SynOcta and Neplant Solid. Internal connection system showed smaller micromotion than external connection system. Specially, Neoplant Solid with internal connection system exhibited significantly smaller micromotion than other implant systems except ITI SynOcta with same internal connection system (p<0.05). In the case of external connection, Branemark EsthetiCone and Neoplant Conical system with abutment showed significantly larger micromotion than Branemark AurAdapt without abutment (p<0.05).

• 대한치과보철학회지
• /
• 제19권1호
• /
• pp.39-45
• /
• 1981

Distal-extension removable partial dentures have long been implicated in the increase in mobility and the destruction of the supporting structures of the primary abutment teeth. Various clasping systems have traditionally been used to retain distal extension removable partial dentures, and other designs have been proposed to minimize torquing forces on the abutment teeth. Most recent studies investigating the effects of removable partial dentures on abutment teeth have been performed in it laboratory setting. Results obtained from in vitro research have given dentists insight into removable partial denture design, but laboratory test model cannot be constructed that simulates actual functional or parafunctiona1 movements and forces. The purpose of this study was to clinically evaluate the degree of tooth mobility produced by two clasping systems (suprabulge type and infrabulge type) used for distal extension removable partial dentures. Akers clasp and R.P.I. system were selected for the evaluation, and four patients required a distal extension removable partial denture on the mandibular arch were selected for participation in the study. Two partial dentures were constructed in the same condition expect the design of clasp. All abutments in the study were mandibular first or second premolars. Measurements of mobility were made with a research tool designed by $M\"{u}hlemann$. This instrument, periodontometer, measures tooth mobility in the mouth by means of a dial gauge accurated to 0.01mm when the tooth is stressed with a force meter. Lingual and buccal deflection of abutment tooth was measured using buccal and lingual pressure. The amount of force applied was 500gm. Tooth mobility tests were made at four key stages; 1. Before insertion of the first removable partial denture, baseline mobility was establsihed. 2. After wearing of the first prosthesis, measurement was made at weekly intervals for 4 weeks. 3. The removable partial denture was then taken from the patient, and tooth mobility was measured again at weekly intervals until the patient's established baseline mobility had returned. 4. The second prosthesis of different clasp design was worn for a month and evaluated in the same manner as the first. The sequence of placement of clasping system was alternated between patients. The following results were obtained from this study; 1. The mobility of abutment tooth increased during the initial stage of wear and returned to baseline mobility after removal of removable partial dentures. 2. The mobility of abutment tooth showed no difference between Akers clasp and I-bar clasp during the 4-week test period. 3. All teeth tested showed greater mobility toward the buccal than the lingual direction.

• Journal of Acupuncture Research
• /
• 제19권1호
• /
• pp.84-91
• /
• 2002

Objective : The purpose of this report is to use more Shin Jong Gyuk of Ohaeng Acupuncture acupunture treatment clinically by comparing the Improvement of Back pain and Sciatica between Common Acupuncture treatment Group and Common Acupuncture with Shin Jong Gyuk of Ohaeng Acupuncture treatment Group. Methods : This study was carried out on 40 patients with Back pain and Sciatica who were hospitalized in Dongshin Univ. Oriental Hospital from 1st, April, 2001 to Tenth, November, 2001. Group A of 20 patients were taken both common acupunture treatment and Shin Jong Gyuk of Ohaeng Acupuncture treatment. And Group B of 20 patients were only taken common acupunture treatment. And after 10 days of admission, we checked and compared VAS(Visual Analogue Scale) and improvement index out of these two groups. SPSS(Statistical Program for Sdcial Science) for Window was used for a statistical analysis and the independent T-test was performed to gauge the improvement of VAS(Visual Analogue Scale) and improvement index out of these two groups, in which case, value of P below 0.05 is considered as useful. Results : The result of the VAS(Visual Analogue Scale) and improvement index of comparision analysis between two groups after 10 days, shows that the improvement of Back pain and Sciatica in Common Acupuncture treatment with Shin Tong Gyuk of Ohaeng Acupuncture treatment Group is more effective than that in Common Acupuncture treatment Group. (independent T-test improvement index P=0.21, VAS P=0.00)

• 생물환경조절학회지
• /
• 제31권4호
• /
• pp.438-443
• /
• 2022

본 연구에서는 실대형 실험과 구조해석을 통해서 현장에서 사용되는 가새 시스템을 적용한 강관 골조 플라스틱 연동온실의 횡하중 가력시험을 수행하고 성능을 분석하였다. 횡강성과 응력을 분석하기 위해 실험체에 변위와 변형률계를 각각 9개소 및 16개소 설치하였으며 가새의 설치 유무에 따른 성능을 비교하기 위해 구조해석을 수행하였다. 실대형 실험과 가새의 설치 유무에 따른 구조해석 결과 비교에서 구조물의 횡강성이 많은 차이를 보였다. 실험체의 측고 부근에서 측정한 횡강성은 가새 시스템을 설치함으로 강성을 최대 44%까지 증가시켰다. 현장에서 사용하는 가새의 접합부가 충분한 강성을 확보하지 못함으로써 외력을 전체 구조물에 적절히 전달하지 못하여 횡강성이 구조해석 결과보다 많이 저하되는 현상이 나타났다. 따라서 온실 설계 시 구조성능의 신뢰성을 높이기 위해서 가새 시스템의 연결방법, 설치위치, 부재의 최대길이 등 온실의 접합부에 대한 명확한 시공방법과 설계기준이 정립되어 온실 설계가 이루어져야 할 것으로 판단된다.