• Journal of Life Science
• /
• v.31 no.1
• /
• pp.10-16
• /
• 2021

The consumption of fresh-cut agricultural materials is increasing due to increased public interest in health and the increase of single-person households. Most fresh-cut agricultural materials can be eaten without heating, thus easily exposing the consumer to food-borne pathogens. As a result, food-borne diseases are increasing worldwide. In the analysis of food-borne pathogens, it is important to detect the strains, but this is time consuming and laborious. Alternative detection methods that have been introduced, include polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE), which is performed without prior culturing. Samples of fresh-cut agricultural materials, such as vegetables, were analyzed by the culture-based method. In 129 samples, non-pathogenic Escherichia coli (3.9%), Bacillus cereus (31.8%), Clostridium perfringens (5.4%), Yersinia enterocolitica (0.8%), and enterohemorrhagic E. coli (0.8%) were detected. Eight samples contaminated with bacteria were randomly selected, further analyzed by PCR-DGGE, and compared with the culture-based method. Two cases detected non-pathogenic E. coli by PCR-DGGE only, despite a lack of detection by the culture method. It was supposed there was possibility of sample loss during its 10-fold dilution for appropriate cultivation. In the detection of high-risk food-borne pathogens, it was found that the detection limit was lower in PCR-DGGE than in the culture-based method (10 CFU/g). This suggests that PCR-DGGE can be alternatively used to detect strains. On the other hand, low-risk food-borne pathogens seem to have higher detection limits in PCR-DGGE. Consequentially, this study contributes to the improvement of food-borne pathogen detection and the prevention of its related-diseases in fresh-cut agricultural materials.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.6
• /
• pp.16-24
• /
• 2020

The purpose of this study is to analyze the usage behavior of Seoullo 7017, the first public garden in Korea, to understand the usage status by analyzing blogs, and to present usage behavior and improvement plans for Seoullo 7017. From June 2017 to May 2020, after Seoullo 7017 was open to citizens, character data containing 'Seoullo 7017' in the title and contents of NAVER and·DAUM blogs were converted to text mining and socialization, a Big Data technique. The analysis was conducted using social network analysis. The summary of the research results is as follows. First of all, the ratio of men and women searching for Seoullo 7017 online is similar, and the regions that searched most are in the order of Seoul and Gyeonggi, and those in their 40s and 50s were the most interested. In other words, it can be seen that there is a lack of interest in regions other than Seoul and Gyeonggi and among those in their 10s, 20s, and 30s. The main behaviors of Seoullo 7017 are' night view' and 'walking', and the factors that affect culture and art are elements related to culture and art. If various programs and festivals are opened and actively promoted, the main behavior will be more varied. On the other hand, the main behavior that the users of Seoullo 7017 want is 'sit', which is a static behavior, but the physical conditions are not sufficient for the behavior to occur. Therefore, facilities that can cause sitting behavior, such as shades and benches must be improved to meet the needs of visitors. The peculiarity of the change in the behavior of Seoullo 7017 is that it is recognized as a good place to travel alone and a good place to walk alone as a public multi-use facility and group activities are restricted due to COVID-19. Accordingly, in a situation like the COVD-19 pandemic, more diverse behaviors can be derived in facilities where people can take a walk, etc., and the increase of various attractions and the satisfaction of users can be increased. Seoullo 7017, as Korea's first public pedestrian area, was created for urban regeneration and the efficient use of urban resources in areas beyond the meaning of public spaces and is a place with various values such as history, nature, welfare, culture, and tourism. However, as a result of the use behavior analysis, various behaviors did not occur in Seoullo 7017 as expected, and elements that hinder those major behaviors were derived. Based on these research results, it is necessary to understand the usage behavior of Seoullo 7017 and to establish a plan for spatial system and facility improvement, so that Seoullo 7017 can be an important place for urban residents and a driving force to revitalize the city.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.33 no.12
• /
• pp.81-90
• /
• 2017

This study was conducted to investigate the thermal environment status of nursery rooms in workplace daycare centers in Jeju and propose measures to improve their indoor physical thermal environment. For this purpose, measurements were performed in the winter indoor physical environment of 51 nursery rooms in 11 workplace daycare centers and a psychological evaluation survey on the thermal environment of nursery rooms was conducted for 70 nursery teachers. The investigation was carried out over 11 days in January 2017. The results are as follow. The average indoor temperature of the nursery rooms was $21.3^{\circ}C$($18.7-23.8^{\circ}C$) and the indoor temperatures of 47 nursery rooms (92.9%) were higher than the environmental hygiene management standard for domestic school facilities ($18-20^{\circ}C$). The average relative humidity was 33.9% (16.4-56.0%), and 37 nursery rooms (86.3%) showed a lower average relative humidity than the standard (40-70%). The average absolute humidity was $9.1g/m^3$ ($4.7-13.6g/m^3$), which was lower than the standard for preventing influenza ($10g/m^3$). When the indoor temperature and humidity of the nursery rooms were compared with international standards, it was found that 85% or more of the 51 nursery rooms maintained appropriate indoor temperatures, but 40-50% of the nursery rooms maintained a low humidity condition. Therefore, they need to pay attention to maintaining the appropriate humidity of the nursery room to keep the children healthy. The average indoor temperature of the nursery rooms showed a weak negative correlation with the average relative humidity. The indoor temperature had a significant effect on the relative humidity: a higher indoor temperature resulted in lower relative humidity. Regarding the fluctuations in the average indoor temperature of the nursery rooms during the day, in daycare centers that used floor heating, the indoor temperature gradually increased form the morning to the afternoon and tended to decrease during lunch time and the morning and afternoon snack times, due to ventilation. The daycare centers that used both floor heating and ceiling-type air conditioners showed a higher indoor temperature and greater fluctuations in temperature compared to the daycare centers that used floor heating only. In the survey results, the average value of the whole body thermal sensation was 3.0 (neutral): 32 respondents (62.7%) answered, "Neutral", Which was the largest number, followed by 21 respondents (30%) who answered, "Slightly hot" and 17 respondents (24.2%) who answered, "Slightly cold." Twenty-nine respondents answered, "Slightly dry," which was the largest number, followed by 28 respondents (54.9%) who answered, "Neutral" and 10 respondents (19.6%) who answered, "Dry." The total number of respondents who answered, "Slightly dry" or "Dry" was large at 39 (56.4%), which suggests the need for indoor environment management to prevent a low-humidity environment. To summarize the above results about the thermal environment of nursery rooms, as the indoor temperature increased, the relative humidity decreased. This suggests the effect of room temperature on the indoor relative humidity; however, frequent ventilations also greatly decrease the relative humidity. Therefore, the ventilation method and the usage of air conditioning systems need to be re-examined.

• Journal of Life Science
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2021

The effects of freeze-dried powder from fresh and black garlic hot water extracts on the lipid metabolism in Sprague-Dawley rats fed a high-cholesterol diet were analyzed. The experimental group was classified into the normal group (NG), the high-fat (HF) and high-cholesterol diet group (CG), the HFC and 1% fresh garlic hot water extract powder-added diet group (FGEG), and the HFC and 1% black garlic hot water extract powder-added diet group (BGEG), respectively. The serum total lipid content was 381.52±7.30 mg/ml and 368.80±4.40 mg/ml in the FGEG and the BGEG, respectively, and was significantly lower than that of the CG. The total cholesterol and triglyceride contents of the FGEG and BGEG were also significantly lower than that of the CG. The high-density lipoprotein (HDL) cholesterol was significantly higher, and the low-density lipoprotein (LDL) and the very low-density lipoprotein (VLDL) cholesterol content was lower in the FGEG and BGEG than in the CG. The serum ALT and AST activities were significantly lower than those of the CG, and especially the BGEG was lower. The total cholesterol content and the triglyceride levels of the liver tissue were 36.0% and 14.3% lower in the BGEG than in the CG, respectively. The thiobarbituric acid reactive substance (TBARS) concentrations in the serum and the liver tissue were higher in the CG than in the FGEG and BGEG, but there was no difference between them. Based on these results, garlic extract powders significantly reduced the lipid profile and increased the antioxidant activity in rats in vivo. The black garlic hot water extract powder was more effective than raw garlic because of the total number of phenolic compounds and browning substances in the black garlic.

• Journal of agricultural medicine and community health
• /
• v.45 no.4
• /
• pp.235-244
• /
• 2020

Objectives: Gyeongsangbuk-do has entered a super-aged society with 20.7% of the population aged 65 and older. As of April 30, 2020, the death rate of COVID-19(3.8 people) in Gyeongsangbuk-do is higher than the national mortality rate (2.3 people), and the fatality rate of COVID-19 by age accounts for more than half of the total of 58.6%, so it is time to propose to prevent infectious diseases in the event of additional infectious disease disasters COVID-19. Methods: We collected daily data on the number of confirmed cases and deaths due to COVID-19 from 19 February to 30 April 2020. The data collected was evaluated using the SPSS 21.0 statistical package. Results: As a result of comparing the incidence and death-related factors of confirmed patients in Gyeongsangbuk-do, there were significant differences in age group (p<0.001), underlying disease (p<0.001), and residence type (p<0.033). Conclusion: Factors affecting the mortality rate of confirmed patients in Gyeongsangbuk-do have been combined with individual level factors(age, gender, underlying disease), which means individual characteristics that have existed since before the disease, and regional level factors(Type of Residence), which are external factors that enable the use of medical resources. Therefore, each local government is required to establish preventive measures considering individual and regional level factors.

• The Journal of Korean Academy of Sensory Integration
• /
• v.18 no.3
• /
• pp.14-26
• /
• 2020

Objective : The purpose of this study was to investigate the effect of therapeutic listening on task performance, auditory behavior problems, and attention in children with sensory modulation disorder. Methods : Sixteen children aged four to seven years who were classified as children with sensory modulation disorder were randomly assigned to either the experimental group (n = 8) or the control group (n = 8). From July 1 to October 18, 2017, both groups participated in sensory integration programs, while therapeutic listening training was administered only to the experimental group. Sensory integration therapy was conducted in two sessions per week for six weeks (12 sessions); each session consisted of 40 minutes of therapy and 10 minutes of parent education. Therapeutic listening was conducted in three thirty-minute sessions per week for six weeks (18 sessions). We used the Canadian Occupation Performance Measure (COPM) to evaluate changes in the participants' occupational performance between pre- and post-intervention. We used Fisher's Auditory Problems Checklist (FAPC) to observe changes in behavioral problems related to hearing. The Child Attention Scale for Teacher (CAST) was used to evaluate changes in attention. Results : No significant differences pre- and post-intervention between the two groups were observed. The participants' auditory behavioral problems improved significantly in the experimental group, but no significant difference was found between the two groups. There was no significant difference in attention between the two groups, but there was a significant difference between the two groups in the "adaptability" and "emotion" domains (p < .05). Conclusion : The results suggest that therapeutic listening training has a positive effect on reducing problematic behaviors related to hearing and improving the occupational performance of children with sensory modulation disorder. This study provides a basis for improving the sensory processing ability of children with sensory modulation disorder by applying listening training in the clinical field and at home.

• Journal of Nutrition and Health
• /
• v.54 no.3
• /
• pp.277-291
• /
• 2021

Purpose: This study was undertaken to identify the alcohol drinking status of industrial workers, their health care practice, and dietary behavior, as well as their nutrient intake. Methods: In July 2019, 220 male subjects working in the Chungnam area were enrolled in the study. Their alcohol drinking status was evaluated by applying the Alcohol Use Disorder Identification-K (AUDIT-K) system. Demographic characteristics, status of health care practice, and dietary behaviors were assessed using a self-administered questionnaire; nutrient intakes were analyzed using 24-hour recalls. Data were analyzed by applying χ²-test, ANOVA, Duncan test, and Pearson's correlation analysis with SPSS v. 25.0. Results: Workers were classified by their alcohol drinking status as 'normal' (84, 38.2%), 'problem drinker' (45, 20.5%), 'alcohol dependence I' (60, 27.3%), and 'alcohol dependence II' (31, 16.0%). The alcohol drinking status showed significant differences with age (p < 0.05), monthly income (p < 0.05), smoking status (p < 0.05), and need for weight control (p < 0.05). Moreover, increased alcohol intake resulted in significantly decreased levels of health care practice and dietary behaviors (p < 0.05, p < 0.01, respectively). The energy intake was highest in the 'alcohol dependence I' group, followed by 'alcohol dependence II', 'problem drinker', and 'normal drinker' (p < 0.05). Intakes of vitamin E, vitamin C, and niacin in the 'alcohol dependence I' group were found to be higher than the other groups (p < 0.05). A negative correlation was obtained between alcohol drinking status, health care practice, and dietary behaviors, whereas a positive correlation was determined between alcohol drinking status, energy and water intakes. Conclusion: Considering these results, we conclude the necessity to consider nutritional and alcoholic education programs for improving the quality of work life of industrial workers, based on their alcohol drinking status.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.813-823
• /
• 2020

Purpose: In order to maximize the stability and productivity of the work through simulation prior to high-risk facilities and high-cost work such as dismantling the facilities inside the reactor, we intend to use digital twin technology that can be closely controlled by simulating the specifications of the actual control equipment. Motion control errors, which can be caused by the time gap between precision control equipment and simulation in applying digital twin technology, can cause hazards such as collisions between hazardous facilities and control equipment. In order to eliminate and control these situations, prior research is needed. Method: Unity 3D is currently the most popular engine used to develop simulations. However, there are control errors that can be caused by time correction within Unity 3D engines. The error is expected in many environments and may vary depending on the development environment, such as system specifications. To demonstrate this, we develop crash simulations using Unity 3D engines, which conduct collision experiments under various conditions, organize and analyze the resulting results, and derive tolerances for precision control equipment based on them. Result: In experiments with collision experiment simulation, the time correction in 1/1000 seconds of an engine internal function call results in a unit-hour distance error in the movement control of the collision objects and the distance error is proportional to the velocity of the collision. Conclusion: Remote decomposition simulators using digital twin technology are considered to require limitations of the speed of movement according to the required precision of the precision control devices in the hardware and software environment and manual control. In addition, the size of modeling data such as system development environment, hardware specifications and simulations imitated control equipment and facilities must also be taken into account, available and acceptable errors of operational control equipment and the speed required of work.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.701-711
• /
• 2020

Purpose: In this study, the risk of flammability of a liquid mixture was experimentally confirmed because the purpose of this study was to confirm the increase or decrease of the flammability risk in a mixture of two substances (combustible+combustible) and to present the risk of the mixture. Method: Flash point test method and result processing were tested based on KS M 2010-2008, a tag sealing test method used as a flash point test method for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was Japan's TANAKA. The flash point was measured with a test equipment that satisfies the test standards of KS M 2010 with equipment produced by the company, and LP gas was used as the ignition source and water as the cooling water. In addition, when measuring the flash point, the temperature of the cooling water was tested using cooling water of about 2℃. Results: First of all, in the case of flammable + combustible mixtures, there was little change in flash point if the flash point difference between the two substances was not large, and if the flash point difference between the two substances was low, the flash point tended to increase as the number of substances with high flash point increased. However, in the case of toluene and methanol, the flash point of the mixture was lower than that of the material with a lower flash point. Also, in the case of a paint thinner, it was not easy to predict the flash point of the material because it was composed of a mixture, but as a result of experimental measurement, it was measured between -24℃ and 7℃. Conclusion: The results of this study are to determine the risk of mixtures through experimental studies on flammable mixtures for the purpose of securing the effectiveness of the details of the criteria for determining dangerous goods in the existing dangerous goods safety management method and securing the reliability and reproducibility of the determination of dangerous goods Criteria have been presented, and reference data on experimental criteria for flammable liquids that are regulated in firefighting sites can be provided. In addition, if this study accumulates know-how on differences in test methods, it is expected that it can be used as a basis for research on risk assessment of dangerous goods and as a basis for research on dangerous goods determination.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.432-440
• /
• 2011

The objective of this study was to investigate growth and fruiting characteristics (e.g., nut qualities) of chestnut (Castanea cerenata) after applying various fertilizer treatments at the cultivation site in Suncheon. Fertilizer treatments were designed as follow: liquid fertilizer, chemical fertilizer, organic fertilizer, and control. Both liquid and chemical fertilizer treatments provided the best growth in height and basal diameter. In addition, these two treatments were very effective for crown width of the trees between both east-west and north-south orientation. The liquid fertilizer treatment was effective on total length of the fruiting branch and length of the bearing to terminate part. Both liquid and chemical fertilizer treatments produced the longest length of basal to bearing part compared to the other two treatments. The liquid fertilizer treatment showed the most thickened basal diameter of the fruiting branch and the greatest diameter of above and below the bearing burr part. Elongation Index of the fruiting branch (EI) was the highest with liquid fertilizer treatment and the remaining four indices (Production Index of fruiting branch, PI; Ratio of Diameter between below and above bearing burr part, RD; Growth Index of fruiting branch diameter, GI; Thickness Index of fruiting branch or dormant branch, TI) were the highest with the chemical fertilizer treatment. Total number of produced branch per fruiting mother branch and number of small and weak branches per fruiting mother branch were highest on the control and liquid fertilizer treatment; however, all treatments produced similar numbers. The chemical and organic fertilizer treatments produced a high number of fruiting branches per fruiting mother branch, while organic and liquid fertilizer treatments produced a high number of burr per fruiting branch. The rate of commercializing on the basis of nut weight and quantity was higher on control (87.5%) than chemical fertilizer treatment (84.6%); however, the rate was even lower on liquid fertilizer treatment (84.3%) and organic fertilizer treatment (82.7%). The liquid fertilizer treatment showed the highest average of nut weight, while chemical fertilizer treatment showed the highest average number of fruiting burr. There was no significant difference in average number of normal nuts per burr among treatments. The yield per tree was high on chemical (8.2 kg) and liquid (8.0 kg) fertilizer treatments, but there was no significant difference among treatments. In the rate of nut grade on the basis of nut weight and quantity, the liquid fertilizer treatment, 43.5% and 34.3% more than large nut respectively, produced higher value chestnuts compared to other treatments.