• Title/Summary/Keyword: 100kJ

Search Result 2,327, Processing Time 0.036 seconds

Dyke Swarms and Fracture System and their Relative Chronology and Tectonic Implications in the Jukbyeon-Bugu Area, Uljin, East Korea (한반도 동부 울진 죽변-부구 지역 암맥군과 단열계의 상대연령과 지구조적 의미)

  • Kim, Chang-Min;Kim, Jong-Sun;Song, Cheol-Woo;Son, Moon;Choi, Sung-Ja
    • The Journal of the Petrological Society of Korea
    • /
    • v.20 no.4
    • /
    • pp.173-189
    • /
    • 2011
  • Basic to acidic dykes and systematic joints are observed pervasively in the Jukbyeon-Bugu area, Uljin, east Korea. In order to classify the dykes and joints and to determine the relative chronology, their geometries, kinematics, and cross-cutting relationships, and the petrography and geochemistry of dykes are synthetically analyzed. Based on the orientations and cross-cutting relationships of 144 dykes (137 basic and 7 acidic dykes) and 370 systematic joints, three basic dike swarms (M-10, M-80, and M-100), one acidic dyke group (AD), and four joint sets (J-10, J-40, J-80, and J-150) are classified. Some of the J-150 joints reactivated as dextral strike-slip fault are recognized in the field and named as F-340R. According to petrographic, geochemical, and occurrence features in the field, M-80 and M-100 dykes have originated from a co-magma and intruded under the same stress field, even though they have intruded through different passages, preexisting fractures and new fractures created by magmatic pressure, respectively. And the relative chronology of dyke swarms and joint sets in the study area is determined as follows : ${\rightarrow}$ ${\rightarrow}$ ${\rightarrow}$ ${\rightarrow}$ ${\rightarrow}$ . And the M-80 (M-100) and M-10 dyke swarms intruded under NNE-SSW and NW-SE trending horizontal minimum stress fields, respectively. According to a synthesis of the results of the previous and this studies, the M-80, M-10, and F-340R are interpreted to have been formed about 64-52 Ma, Eocene~Oligocene, and Miocene, respectively.

Attachment of Pasteuria penetrans Endospores to Meloidogyne spp. Juveniles Affected by Temperatures and the Nematode species (선충기생세균(Pasteuria penetrans) 내생포자의 뿌리혹선충(Meloidogyne spp.) 유충 부착에 대한 온도와 선충종의 영향)

  • Cho, Myoung Rae;Kim, Hyung Hwan;Kang, Taek Joon;Ahn, Seung Joon;Yang, Chang Yul;Jeon, Sung Wook
    • Korean journal of applied entomology
    • /
    • v.52 no.2
    • /
    • pp.109-113
    • /
    • 2013
  • A greenhouse soil infested with an obligate nematode parasitic bacterium, Pasteuria penetrans, was used to test the effect of temperatures on the endospore attachment to root-knot nematode, Meloidogyne arenaria, juveniles (J2). Freshly hatched J2s were inoculated to the soil in petri dish and incubated under different temperatures of $20^{\circ}C$, $25^{\circ}C$, $30^{\circ}C$, and $35^{\circ}C$ for 7 days. The endospore attachment rates were 100% in all the temperatures, while the number of endospores attached per J2 was highest in $25^{\circ}C$ with 28.3 endospores/J2 followed by 20.2, 18.6, and 13.6 in $30^{\circ}C$, $20^{\circ}C$, and $35^{\circ}C$, respectively. When the soil was pre-treated under different temperatures before the J2 inoculation, the endospore attachment rates significantly decreased from 60% in room temperature to $25^{\circ}C$, 31.7, 8.3, 5.0, and 0% after the soil incubation in $-30^{\circ}C$, $4^{\circ}C$, $40^{\circ}C$, $50^{\circ}C$, and $100^{\circ}C$ for 10 days, respectively. The endospore numbers attached per J2 were 3.5, 4.3, 1, 1, and 0 when the soil was pre-treated in $-30^{\circ}C$, $4^{\circ}C$, $40^{\circ}C$, $50^{\circ}C$, and $100^{\circ}C$, respectively, which were lower than 5.3/J2 of room temperature treated soil. The P. penetrans isolate in the soil showed nematode species-specific endospore attachment characteristics with 100% attachment rate only on M. arenaria J2s while the rates were 0% on M. hapla and M. incognita J2s.

Fuel Qualities and Combustion Characteristics of Animal-Fats Biodiesel for Agricultural Hot Air Heaters

  • Kim, Youngjung;Park, Seokho;Kim, Youngjin;Kim, Chungkil
    • Journal of Biosystems Engineering
    • /
    • v.37 no.5
    • /
    • pp.296-301
    • /
    • 2012
  • Purpose: Combustion and fuel qualities of the animal-fats biodiesel as a heating fuel for agricultural hot air heater were studied. Methods: Biodiesel (BD) was made from animal-fats by reacting with methanol and potassium hydroxide in the laboratory. The biodiesel made in the laboratory was tested for fuel and combustion qualities. Results: The kinematic viscosity and the calorific values of the biodiesels were measured. Kerosene based biodiesel, BD20 (K) showed 18 cSt at $-20^{\circ}C$. It seemed that BD100 was not suitable for a heating fuel under some temperature. As BD content increased, the calorific value decreased up to 40,000 J/g for BD100, while the calorific value of light oil was 45,567 J/g showing difference of 5,567 J/g, about 12% difference. Several different fuels including BD20 (biodiesel 20% + light oil 80%), BD50 (biodiesel 50% + light oil 50%), BD100 (biodiesel 100%), and light oil were tested for fuel combustion qualities for agricultural hot air heater, and their combustion performances were compared and analyzed. Flame dimensions of biodiesels and light oils were almost the same shape at the same combustion condition. Generally, the $CO_2$ amounts of BDs were greater than light oil. However, in this study the differences were minor, so there was no significant difference existed between the BDs combustion and light oil. Conclusions: It seemed that quality was good for heating oil for agricultural hot air heater because of showing no barriers for continuous combustion and proper exhaust gas temperature and $CO_2$ amount discharged. But, for fuel fluidity for higher BD content fuel could be a detrimental problem in situations where the outdoor temperature is lowered. As BD content increased, calorific value decreased up to 40,000 J/g for BD100. Calorific value difference between BD20 and light oil was about 1,360 J/g.

The Formation and Characteristics of Titanium Germanide with Cr capping layer on n-Ge(100) Substrate (Cr capping layer를 이용한 n-Ge(100) 기판에서의 Ti germanide 형성과 특성에 관한 연구)

  • Mun, N.J.;Choi, C.J.;Shim, K.H.;Park, D.S.;Yang, H.Y.;Jeong, M.R.;Yoon, C.J.
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2009.06a
    • /
    • pp.154-154
    • /
    • 2009
  • Cr capping layer를 이용하여 Titanium germanide의 열적 안정성을 향상시키는 연구를 수행하였다. n-type Ge(100) 기판 위에 전자빔 증착기를 이용하여 30nm 두께의 Ti와 Cr capping layer를 증착하고 $400\;^{\circ}C$에서 $800\;^{\circ}C$까지 30초간 N2 분위기로 급속 열처리하여 Ti germanide를 형성하였다. XRD결과로부터 Cr capping layer의 유무에 관계 없이 Ti germanide가 형성된 것을 관찰할 수 있었다. Ge 기판 위에 CTLM 패턴을 형성하고 실험을 진행하여 Ti germanide의 I-V 측정 데이터를 통해 Ohmic 특성을 알아보았고, contact resistance, sheet resistance, specific contact resistance를 구하였다.

  • PDF

NOx Emission Characteristics of 100kW Gas Burner by FGR (100kW용량가스 연소기의 FGR에 의한 Nox발생 특성 연구)

  • Kim, K.L.;Kim, H.J.;Park, B.S.;Kim, J.J.
    • 한국연소학회:학술대회논문집
    • /
    • 2001.11a
    • /
    • pp.1-7
    • /
    • 2001
  • FGR is one of the most widely used methods of NOx reduction in the combustion process. It was investigated the effect of FGR, excess air ratio, peak temperature and firing rate on NOx emission in this study. 100kW burner and LNG were adopted in this experiment. NOx emission was notably decreased with the increase of FGR, however CO emission was also drastically increased in the 25% FGR. And excess air ratio, peak temperature and firing rate did not affect the NOx emission appreciably in the normal operating condition.

  • PDF

Regenerative amplification of pulses in Nd:YLF (Nd:YLF 레이저 펄스의 재생식 증폭)

    • Korean Journal of Optics and Photonics
    • /
    • v.3 no.1
    • /
    • pp.37-42
    • /
    • 1992
  • Nd:YLF regenerative amplifiers have proved to be reliable source for producing stable short pulses of high repetition rate. We used a convex-concave mirror design to optimize output energy and stability while minimizing the energy density on critical intracavity optical components. The Kd:YLF laser pulse is used as a seed pulse which has pulse width of 40 ps, energy of 100pJ, and wavelength of 1053 nm. The amplifier yields stable 1 mJ pulses at 3.5 kHz repetition rate, and the maximum energy is measured as 5 mJ.

  • PDF

Trends of Line Card Technology Based on 40G/100G Ethernet Standard (40G/100G 이더넷 표준 기반의 라인카드 기술 동향)

  • Yang, C.R.;Ahn, K.H.;Kim, S.H.;Ko, J.S.;Kim, K.
    • Electronics and Telecommunications Trends
    • /
    • v.25 no.6
    • /
    • pp.110-122
    • /
    • 2010
  • UCC, 트위터 등 멀티미디어 콘텐츠 증가, 유틸리티 컴퓨팅과 같은 다양한 신규 서비스의 급증, IPTV 등 높은 대역폭을 요구하는 애플리케이션의 증가, 가상화 데이터 센터의 등장과 함께 40G/l00G 이더넷 기술이 차세대 광대역 서비스 대역폭 요구에 대한 장기적 해결방안의 하나로 제시되고 있는 가운데 세계적으로 40G/100G 이더넷으로의 네트워크의 진화가 시작되고 있다 본 고에서는 최근 세계적으로 뜨거운 쟁점이 되고 있는 차세대 인프라 40G/100G 이더넷 표준을 기반으로 하는 디바이스 및 프로덕트의 출시 동향을 살펴보고 현재 사용 기능한 상용 칩을 이용한 40G 이더넷 라인카드의 구조와 향후 구현 가능한 100G 이더넷 라인카드의 구조 그리고 40G/100G 이더넷 상의 OTN 네트워크 응용에 대해 고찰한다.