• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.4
• /
• pp.51-56
• /
• 2012

In order to fabricate through-Si-vias for thermal vias by using wet etching process, anisotropic etching behavior of Si substrate was investigated as functions of concentration and temperature of TMAH solution in this study. The etching rate of 5 wt%, 10 wt%, and 25 wt% TMAH solutions, of which temperature was maintained at $80^{\circ}C$, was $0.76{\mu}m/min$, $0.75{\mu}m/min$, and $0.30{\mu}m/min$, respectively. With changing the temperature of 10 wt% TMAH solution to $20^{\circ}C$ and $50^{\circ}C$, the etching rate was reduced to $0.067{\mu}m/min$ and $0.233{\mu}m/min$, respectively. Through-Si-vias of $500{\mu}m$-depth could be fabricated by etching a Si substrate for 5 hours in 10 wt% TMAH solution at $80^{\circ}C$ after forming same via-pattern on each side of the Si substrate.

• Journal of the Korean Ceramic Society
• /
• v.44 no.4 s.299
• /
• pp.198-201
• /
• 2007

Multi-walled carbon nanotube (M-CNT)/Nafion nanocomposites were prepared by solution casting to elucidate the effect of M-CNT addition, from 0 to 7 wt%, on the viscoelastic behavior of the composites. The M-CNT bundles induced by the Nafion polymer were determined to be uniformly distributed for the 1 wt% M-CNT/Nafion nanocomposites. The 1 wt% M-CNT/Nafion composite exhibited the highest blocking stress of 2.3 kPa due to its high elastic modulus of 0.485 GPa. From a dynamic mechanical analysis, the 1 wt% M-CNT had the highest storage and loss moduli compared with the other samples in all frequency and temperature ranges. From the storage modulus data, the M-CNT loaded composites had similar $T_g$ values near $120^{\circ}C$. The glass transition temperatures of the M-CNT loaded composites were $120^{\circ}C$ (1 wt%), $117^{\circ}C$ (3 wt%), $117^{\circ}C$ (5 wt%), and $135^{\circ}C$ (7 wt%), suggesting that the effect of the M-CNTs on the Nafion film begins at 1 wt%. Thus, it has been concluded that the 1 wt% M-CNT disported composite is attractive for actuator applications.

• IMMUNE NETWORK
• /
• v.12 no.2
• /
• pp.58-65
• /
• 2012

Background: A cell line with transfected Wilms' tumor protein 1 (WT1) is has been used for the preclinical evaluation of novel treatment strategies of WT1 immunotherapy for leukemia due to the lack of appropriate murine leukemia cell line with endogenous WT1. However, silencing of the transgene occurs. Regarding the effects of hypomethylating agents (HMAs) on reactivation of silenced genes, HMAs are considered to be immune enhancers. Methods: We treated murine WT1- transfected C1498 (mWT1-C1498) with increasing doses of decitabine (DAC) and azacitidine (AZA) to analyze their effects on transgene reactivation. Results: DAC and AZA decreased the number of viable cells in a dose- or time-dependent manner. Quantification of WT1 mRNA level was analyzed by real-time polymerase chain reaction after mWT1-C1498 treated with increasing dose of HMA. DAC treatment for 48 h induced 1.4-, 14.6-, and 15.5-fold increment of WT1 mRNA level, compared to untreated sample, at 0.1, 1, and $10{\mu}M$, respectively. Further increment of WT1 expression in the presence of 1 and $10{\mu}M$ DAC was evident at 72 h. AZA treatment also induced up-regulation of mRNA, but not to the same degree as with DAC treatment. The correlation between the incremental increases in WT1 mRNA by DAC was confirmed by Western blot and concomitant down-regulation of WT1 promoter methylation was revealed. Conclusion: The in vitro data show that HMA can induce reactivation of WT1 transgene and that DAC is more effective, at least in mWT1-C1498 cells, which suggests that the combination of DAC and mWT1-C1498 can be used for the development of the experimental model of HMA-combined WT1 immunotherapy targeting leukemia.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.10
• /
• pp.1278-1286
• /
• 2008

The effect of Tween 20 addition on changes in the stability of methylcellulose (MC) emulsions (1 wt% MC, 10 wt% n-tetradecane, 20 mM bis-tris buffer, pH 7) was investigated by creaming stability and orthokinetic stability measurements. In the case of MC emulsions containing varying amounts of oil (1$\sim$30 wt%) and no Tween 20 added, creaming stability, judged by mean migration velocity of fat globules ($V_m$), was found to depend on droplet size: the larger the droplet size, the worse the stability [$V_m$: 0.326 $\mu$m $min^{-1}$ ($d_{32}$: 0.32 $\mu$m) ${\rightarrow}V_m$: 0.551 $\mu$m $min^{-1}$ ($d_{32}$: 0.53 $\mu$m)]. With Tween 20, creaming stability was found to be worse than the one without Tween 20, except for MC emulsion containing 0.2 wt% Tween 20. In addition, cream stability was the lowest with the lowest concentration of Tween 20 and a tendency to recover with increasing Tween 20 concentration [$V_m$: 0.598 $\mu$m $min^{-1}$ (0.01 wt%)${\rightarrow}V_m$: 0.389 $\mu$m $min^{-1}$ (0.2 wt%)] was found. From viscosity measurement for aqueous bulk phase of MC emulsions, such a change in the creaming stability was found to coincide well with the results of viscosity measurement. Therefore, it was reasonable to say that creaming stability of MC emulsions containing Tween 20 depended on MC concentration in aqueous bulk phase, which was in turn varied by competitive adsorption between MC and Tween 20 at the oil droplet surface. In case of orthokinetic stability, judged by destabilization time ($t_d$), it was found that the addition of Tween 20 resulted in lowered stability with more pronounce tendency at higher concentrations [$t_d$: 160 min (0.03 wt%)${\rightarrow}t_d$: 100 min (0.2 wt%)]. Moreover, combined with previous results, the orthokinetic stability of MC emulsions containing Tween 20 was found to be exponentially proportional to MC load. In conclusion, competitive adsorption between MC and Tween 20 may affect the stability properties of MC emulsion to varying extents, depending on the concentration of Tween 20.

• Journal of Powder Materials
• /
• v.16 no.4
• /
• pp.275-279
• /
• 2009

The aging characteristics of gas atomized Mg-6 wt.% Al-1 wt.% Zn alloy were investigated and compared to those of cast Mg-6 wt.% Al alloy. The gas atomized Mg-6 wt.% Al-1wt.% Zn alloy powders had spherical morphology between 1 and 100 $\mu m$ in diameter. After compaction under the pressure of 700 MPa at $320^{\circ}C$ for 10 min, the Mg-6 wt.% Al-1 wt.% Zn alloy showed a grain size of approximately 40 $\mu m$ which is smaller than that of the cast Mg-6 wt.% Al alloy, and a relative compact density of approximately 93%. After ageing, the Mg-6 wt.% Al-1 wt.% Zn alloy showed much faster peak hardness than cast Mg-6 wt.% Al alloy. The Mg-6 wt.% Al-1 wt.% Zn alloy showed the new fine precipitations with ageing time, while the cast Mg-6 wt.% Al alloy was almost similar morphology.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.10
• /
• pp.4699-4711
• /
• 2016

Background: In the last decade, it has become clear that change of gene expression may alter the hematopoietic cell quiescent state and consequently play a major role in leukemogenesis. WT1 is known to be a player in acute myeloid leukemia (AML) and FOXP3 has a crucial role in regulating the immune response. Objectives: To evaluate the impact of overexpression of WT1and FOXP3 genes on clinical course in adult and pediatric AML patients in Egypt. Patients and methods: Bone marrow and peripheral blood samples were obtained from 97 de novo non M3 AML patients (63 adult and 34 pediatric). Real-time quantitative PCR was used to detect overexpression WT1 and FOXP3 genes. Patient follow up ranged from 0.2 to 39.0 months with a median of 5 months. Results: In the pediatric group; WT1 was significantly expressed with a high total leukocyte count median 50X109/L (p=0.018). In the adult group, WT1 had an adverse impact on complete remission induction, disease-free survival and overall survival (p=0.02, p=0.035, p=0.019 respectively). FOXP3 overexpression was associated with FAB subtypes AML M0 +M1 vs. M2, M4+M5 (p =0.039) and the presence of hepatomegaly (p=0.005). Conclusions: WT1 and FOXP3 overexpression has an adverse impact on clinical presentation, treatment response and survival of pediatric and adult Egyptian AML patients.

• Korean Journal of Materials Research
• /
• v.7 no.11
• /
• pp.999-1006
• /
• 1997

0.14wt.%C-0.82wt.%Mn-0.20wt, %Si-0.10wt.%V-0.03wt.%Nb의 조성을 갖는 직접 소입강에 몰리브데늄을 각각 0.30wt.%, 0.58wt.% 첨가하여 기계적 성질을 조사하고 투과 전자 현미경을 이용하여 각각의 미세 조직을 관찰하여 석출물을 분석하였다. 직접 소입시의 석출물은 M$_{2}$C, MC의 비평형 상태의 석출물이 생성되었고 석출물들은 마르텐사이트 래스내의 침상형탄화물, 구형의 M$_{2}$C탄화물, 직사각형 형태의 MC탄화물이 관찰되었다. 유냉시에는 래스내의 침상형 탄화물만 관찰되었으며 수냉시에는 M$_{2}$C 탄화물이 관찰되었다. 0.58wt.%의 몰리브데늄의 첨가된 강에서는 MoN이 관찰되었으며, 이 강의경우 강도의 손실 없이 인성이 증가하는 경향을 나타내었다.

• Journal of Powder Materials
• /
• v.10 no.1
• /
• pp.26-33
• /
• 2003

Al-l4wt.%Ni-l4wt.% Mm(Mm=misch metal) alloy powders rapidly solidified by the gas atomization method were subjected to mechanical milling(MM). The morphology, microstructure and hardness of the powders were investigated as a function of milling time using scanning electron microscopy(SEM), transmission electron microscopy(TEM) and Vickers microhardness tester. Microstructural evolution in gas-atomized Al-l4wt.%Ni-l4wt.% Mm(Mm=misch metal) alloy powders was studied during mechanical milling. It was noted that the as-solidified particle size of $200\mutextrm{m}$ decreases during the first 48 hours and then increases up to 72 hours of milling due to cold bonding and subsequently there was continuous refinement to $20\mutextrm{m}$ on milling to 200 hours. Two microstructurally different zones, Zone A, which is fine microstructure area and Zone B, which has the structure of the as-solidified powder, were observed. The average thickness of the Zone A layer increased from about 10 to $15\mutextrm{m}$ in the powder milled for 24 hours. Increasing the milling time to 72 hours resulted in the formation of a thicker and more uniform Zone A layer, whose thickness increased to about $30~50\mutextrm{m}$. The TEM micrograph of ball milled powder for 200 hours shows formation of nano-particles, less than 20 nm in size, embedded in an Al matrix.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.124-130
• /
• 1996

The hydrocarbons containing more than 10 carbons(0.1% of total volume, C10+), residue of aromatization from aliphatic hydrocarbons, were condensated in the presence of catalyst aluminumchloride and cocatalyst nitrobenzene(NB) to be pitchs with desirable properties. The properties of pitch were affected by the concentration of cocatalyst chosen 20 and 30wt.%. The pitch with 30wt.% NB showed higher carbon yield and lower crystallinity than that with 20wt.% NB. The two pitches were heat treated at 1000C and measured of charge/discharge capacity of the carbon as an anode. The carbon prepared at 20wt.% NB exhibited excellent cyclic stability with a capacity of 218mAh/.g and that at 30wt.% exhibited rather low cyclic stability with higher capacity of 235mAh/g.

• Journal of Plant Biotechnology
• /
• v.32 no.2
• /
• pp.111-116
• /
• 2005

The two different ways to supply air inside the bioreactor were examined in the adventitious root cultures of Panax ginseng C.A. Meyer. First, the aeration rate varied at 0.05, 0.1, 0.2 and 0.3 vvm, respectively which were supplied during the whole culture period. Second, the amount of air supply was increased from 0.05 to 0.3 vvm at 10-day intervals in proportion to the root growth. Both the root growth and the ginsenoside accumulation were maximized to 175.8 g dry wt. of root growth and 4.3 mg/g dry wt. of ginsenoside accumulation when the aeration rate was increased gradually. The effect of the sparger pore size (15, 30 and $60\;{\mu}m$) in the bioreactor was also investigated, which suggested the greatest root growth (175.9 g dry wt.) in the $15{\mu}m$-sized sparger and the highest ginsenoside content (4.3 mg/g dry wt.) in the $60\;{\mu}m$ size. Finally, the diameter of a sparger ($15\;{\mu}m$-sized) varied at 1.5, 3.0, 5.0 and 8.0 cm, respectively. The highest root growth (191.9 g dry wt.) and the ginsenoside content (4.9 mg/g dry wt.) were obtained in the sparger diameter of 8.0 cm.