• Journal of the Korean Ceramic Society
• /
• v.31 no.12
• /
• pp.1570-1576
• /
• 1994

Effect of Na2O/SiO2 molar ratio, calcining temperature and addition of NaCl were investigated on the hydrothermal formation of X-type zeolite from the natural mordenite, which is a kind of rock deposited abundantly in kuryong po. Pulverized mordenite was first mixed with NaOH or NaOH-NaCl solution, and crystallized under hydrothermal condition at 90~10$0^{\circ}C$ for 10 hrs. Optimum condition for synthesis of the X-type zeolite were \circled1 the ratio Na2O/SiO2, NaCl/Al2O3 and H2O/Na2O:0.68, 11.4 and 40, respectively, \circled2 calcining temperature of starting materials: 90$0^{\circ}C$, \circled3 aging time: 48 hrs. and \circled4 crystallization temperature: 10$0^{\circ}C$. The yield of X-type zeolite under the optimum condition was about 55~60%, and the major crystallized X-type zeolite was faujasite phase. Zeolite of then type X was crystallized when NaCl was added to treating solution with in the limit 14.25 of NaCl/Al2O3 molar ratio. As the calcination temperature (from 50$0^{\circ}C$ to 95$0^{\circ}C$) of starting materials increases, yield of zeolite x increase.

• Nuclear Engineering and Technology
• /
• v.49 no.8
• /
• pp.1778-1782
• /
• 2017

The interaction of $NpO^+_2$ with $Cl^-$ was studied using visible-near-infrared spectroscopy in $NaCl-Ca-Cl_2-NaClO_4$, $NaCl-NaClO_4$, and $CaCl_2-NaClO_4$ solutions with ionic strength (I) of 6M. The spectra of $NpO^+_2$ around 980 nm varied with $Cl^-$ concentration in the $NaCl-CaCl_2-NaClO_4$ and $NaCl-NaClO_4$ solutions at [$Cl^-$] ${\geq}3.5M$, but not in the $CaCl_2-NaClO_4$ solution. Assuming the 1:1 interaction between $NpO^+_2$ and $Cl^-$, the apparent equilibrium constants at I = 6M were evaluated. The presence of $Ca^{2+}$ was found to destabilize overall interaction between $NpO^+_2$ and $Cl^-$. The observations were consistent with the density functional theory calculation.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.26-31
• /
• 2016

Polycaprolactone (PCL) has been fabricated into the membrane type scaffolds of 3 dimensional pore network for the tissue engineering applications by the blade method of salt (NaCl) leaching and solution casting. In this study, the experimental designs have each conditions of drying temperature, salt particle size, salt content. The modified dispensing pump connected up to homogenizing mixer system is used for mixing the $PCL/CHCl_3$ solution and NaCl particles. The membrane fabricated use by the film applicator to poured mixed solution on the glass plate. The great pore by NaCl particles and the small pore by the evaporated $CHCl_3$ in the frame wall of great pores are multiply formed in membrane scaffolds.

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.349-359
• /
• 1992

Studies were carried out on the selective removal of inorganic salts such as NaCl and $Na_2SO_4$ from dye solution, using counter diffusion-reverse osmosis and nanofiltration, respectivey. For the dye solution used in the experiments, 1 to 30% of salts were removed by counter diffusion while the loss of dye molecules was less than 0.3%. The separation factors by one pass operation were 10-500 according to ionic species. In five successive operations, removals of anion($Cl^-$) increased but those of cation($Na^+$) decreased due to the Donnan effect. Effects of feed flow rate on removal efficiencies of various ions were also observed at constant flow rate of stripping water. Reverse osmosis of desalted dye solution by counter diffusion was conducted to prepare highly concentrated liquid dyes. The rejection efficiency of dye molecules was greater than 99%. For the rejection efficiency of chloride ion, experimental values were compared with theoretical ones based on solution-diffusion model. Two stage diafiltration was performed in nanofiltration. The rejection efficiency of chloride ion was continuously decreased due to the Donnan dialysis and even negative rejection was observed. The Donnan effect was more pronounced in the second diafiltration.

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.1
• /
• pp.55-63
• /
• 2018

Background: The present study assessed the response of kenaf (Hibiscus cannabinus L., Jangdae) seed to NaCl and the effects of polyethylene glycol (PEG) on kenaf seed germination and vigor. Methods and Results: Seed germination ranged from 11.3% to 58.8% after 24 hours of immersion in NaCl concentrations from 0% to 0.5%. The priming treatments had lower electrical conductivity (EC) values for the seeds than for the control and a deteriorated palisade layer. Priming in 10% PEG for 48 hours increased the germination upto 96.3% in $H_2O$ solution and 98.8% in 0.3% NaCl solution compared to that of the control (78.8%). Germination synchronization, and shoot and root growth of the primed seeds were greater than those of the control. The $T_{50}$ of the control in $H_2O$ and 0.3% NaCl solution was 22 and 28 times, respectively. After priming, nine times was sufficient to reach $T_{50}$ in both solution. The mean number of days to germination (MDG) decreased from 1.43 days for the control to 0.55 days for 0% PEG in $H_2O$ solution and from 1.57 days for the control to 0.56 days for 0% PEG in 0.3% NaCl solution. The dry weight after the 10% PEG treatment was higher than that of the control. Conclusions: Taken together, 10% PEG treatment for 24 hours is recommended for kenaf seed invigoration before planting.

• Food Science and Preservation
• /
• v.15 no.2
• /
• pp.236-242
• /
• 2008

We investigated the optimum concentration of a $NaClO_2$ solution and the amount of gaseous $Cl_2$ for production of high yield and purity of aqueous $ClO_2$ by use of a gaseous chlorine-chlorite $ClO_2$ generator. This system produced lower concentrations of chlorine dioxide and is applicable for direct-use in food processing as a cleaner and sanitizer. The concentration of $NaClO_2$ solution and the amount of gaseous $Cl_2$ was varied from 0.01-0.1% and 100-1,000 g/hr, respectively. The concentrations of chlorite, chlorate, FAC (free available chlorine), and chlorine dioxide that were produced increased with increasing concentration of $NaClO_2$ solution and with the amount of gaseous $Cl_2$. The optimum concentration of $NaClO_2$ solution and amount of gaseous $Cl_2$ were 0.1% and 900 g/hr respectively. $ClO_2$ and FAC produced at these concentrations were 882.0 ppm and 8.0 ppm, with no detection of chlorite and chlorate. The yield and purity of $ClO_2$ were 97.0% and 96.0% respectively. Immersion-cleaning experiments showed that this protocol decreased the level of CFU/g by $10^3$- to $10^4$-fold, with a similar effect on fruit.

• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.109-114
• /
• 1984

Eight Korean native black goats were used, $10m{\ell}$ of blood was collected from the Jugular vein into heparinized tubes a week interval. The heparinized blood was centrifuged for separation to blood plasma and corpuscles. The hematocrit, per centage of blood that is red blood cells, was reschuffuled of 10 %, 20 %, 30 %, 40 % and 50 % using blood plasma, 0.9 % NaCl solution and 5.4 % dextrose solution. The sedimentation rates of red blood cell obtained at $7^{\circ}C{\pm}1^{\circ}C$ and $27^{\circ}C{\pm}1^{\circ}C$ are summarized as follows. 1) The sedimentation rates of red blood cell were more increased by lower PCV%, i.e. there was a reverse relationship between the sedimentation rates and PCV% at any condition of these experiments. 2) The RBC were sedimented the most quickly in the NaCl solution and slower in the plasma compare with the dextrose solution at the same PCV%. 3) There was no temperature effect on the sedimentation rates between the two groups of $7^{\circ}C{\pm}1^{\circ}C$ and $27^{\circ}C{\pm}1^{\circ}C$(at PCV 20% and 10%), even though the temperature difference is $20^{\circ}C$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.13 no.4
• /
• pp.54-62
• /
• 1989

When some kinds of inhibitors, i.e. $1{\times}10{-3}mol/l$ arsenic trioxide, 0.2 mol/l 2-mercaptoethanol, 0.2mol/l thiourea were added to 3% NaCl solution, there were some considererable effects to decrease corrosion current density in natural potential condition and the effect fo solution temperature increasing corrosion rate was smaller than that of no addition to 3% NaCl solution. However the susceptibility of hydrogen embrittlement due to over-protection in case of cathodic protection was much greater than that of no addition, especially was the greatest in case of addition of 2-mercaptoethanol. Therefore adding inhibitors for anti-corrosion effect, it is suggested that selection of the optimum protection potential is important from the view point of prevention against hydrogen embrittlement due to over-protection in case of cathodic protection.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.4
• /
• pp.185-189
• /
• 2012

A.c. impedances of mechanically polished CP-Ti specimens were measured at open-circuit potential (OCP) with immersion time and under applied anodic potentials between -0.2 and 1 $V_{Ag/AgCl}$ in 0.1 M NaOH solution. Capacitances of native oxide films ($C_{ox,na}$) grown naturally and capacitances of anodic oxide films ($C_{ox,an}$) formed under applied anodic potentials were obtained to examine the growth of native and anodic oxide films in 0.1 M NaOH solution and how to use $C_{ox,na}$ for the surface area measurement of Ti specimen. $1/C_{ox,na}$ and $1/C_{ox,an}$ appeared to be linearly proportional to OCP and applied potential ($E_{app}$), with proportional constants of 0.086 and 0.051 $uF^{-1}\;V^{-1}$, respectively. The $C_{ox,na}$ also appeared to be linearly proportional to geometric surface area of the mechanically polished CP-Ti fixture specimen, with proportional constants of 11.3 and $8.5{\mu}F\;cm^{-2}$ at -0.45 $V_{Ag/AgCl}$ and -0.25 $V_{Ag/AgCl}$ of OCPs, respectively, in 0.1 M NaOH solution. This linear relationship between $C_{ox,na}$ and surface area is suggested to be applicable for the measurement of real surface area of Ti specimen.

• Journal of Ocean Engineering and Technology
• /
• v.1 no.2
• /
• pp.123-129
• /
• 1987

Corrosion fatigue fracture of dual phase steel(SS41) and raw material steel(SS41) were investigated in 3.5% NaCl aqueous solution at PH 4,6,9 and 11. The fatigue limit of dual phase steel is increased approximately 1.8 times larger than that of raw material in air. The corrosion fatigue life of dual phase steel is about 5-10 times larger than that of raw material in 3.5% NaCl aqueous solution. The reduction of fatigue life is larger for the acidsalt solution than for the alkali salt solution. The reduction of stress level on the reduction ratio of corrosion fatigue life is large as pH 6-11. The reduction ratio of corrosion fatigue life of dual phase steel and raw material is nearly coincided at pH 2. While at pH4-2 the reduction ratio of corrosion fatigue life only depends on the corrosion effect. It has been found that the corrosion resistance effect of dual phase steel is smaller than that of raw material in corrosion fatigue crack propagation rate. As pH below 6 is changed, it can be clearly observed from raw material that the brittle intergranular fracture is characterized, and from the above result, the influence of corrosion of dual phase steel is small.