• Journal of Sensor Science and Technology
• /
• v.5 no.6
• /
• pp.68-73
• /
• 1996

ZnO thin films were prepared on glass and (012) sapphire substrates by rf magnetron sputtering. Polycrysralline ZnO films with a (002) orientation were obtained on glass substrates. (110) ZnO films were epitaxially grown on the (012) sapphire substrates. Surface acoustic wave properties were also measured for propagating along the c axis of ZnO film on the glass and sapphire substrates. The phase velocities ($V_{p}$) on glass and sapphire substrate at center frequency were 2680 m/sec and 5980 m/sec and the effective coupling coefficient ($k^{2}$) on the 0th mode were 0.98 % and 1.43 %, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.8
• /
• pp.1057-1065
• /
• 2010

Two experiments were conducted to compare the effects of feeding a newly-developed rare earth mineral-yeast product, zinc oxide (ZnO) or antibiotics on the performance, nutrient digestibility and serum parameters of weanling pigs. In experiment 1, 150 crossbred barrows (24 d old and 6.28 kg BW) were fed one of five dietary treatments consisting of an unsupplemented basal diet or the basal diet supplemented with antibiotics (33 ppm tiamulin and 100 ppm chlortetracycline), ZnO (1,500 or 2,500 ppm) or 0.1% peptide-bound rare earth mineral-yeast. In experiment 2, 576 crossbred barrows (28 d old and 7.20 kg BW) were fed the same diets as those used in experiment 1 modified only by the addition of 1.0% Celite 545 to all diets as a digestibility marker. However, the negative control was not included. In experiment 1, weight gain was significantly lower (p<0.05) for pigs fed the negative control than for pigs fed diets supplemented with antibiotics, ZnO, or rare earth mineral-yeast. Pig performance did not differ between pigs fed the four supplemented diets. In experiment 2, there were no differences in performance between pigs fed diets supplemented with antibiotic, ZnO or rare earth mineral-yeast. The digestibility of dry matter, crude protein, calcium, phosphorus and energy were significantly (p<0.01) higher on the rare earth mineral-yeast diet than on diets supplemented with ZnO. In addition, pigs fed the diet supplemented with rare earth mineral-yeast had significantly (p<0.05) higher digestibility of histidine, lysine, threonine and valine than pigs fed the ZnO supplemented diets. Digestibility coefficients for pigs fed antibiotics tended to be intermediate to those of pigs fed rare earth mineralyeast or ZnO. In conclusion, the performance of pigs fed rare earth mineral-yeast was basically equal to that of pigs fed antibiotics or ZnO indicating that rare earth mineral-yeast can be successfully used as a growth promoter in diets fed to nursery pigs. The effects of rare earth mineral-yeast appeared to be mediated through improvements in nutrient digestibility.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.446-446
• /
• 2011

One dimensional (1-D) structures of ZnO nanorods are promising elements for future optoelectronic devices. However there are still many obstacles in fabricating high-quality p-type ZnO up to now. In addition, it is limited to measure the degree of the doping concentration and carrier transport of the doped 1-D ZnO with conventional methods such as Hall measurement. Here we demonstrate the measurement of the electronic properties of p- and n-doped ZnO nanorods by the Kelvin probe force microscopy (KPFM). Vertically aligned ZnO nanorods with intrinsic n-doped, As-doped p-type, and p-n junction were grown by vapor phase epitaxy (VPE). Individual nanowires were then transferred onto Au films deposited on Si substrates. The morphology and surface potentials were measured simultaneously by the KPFM. The work function of the individual nanorods was estimated by comparing with that of gold film as a reference, and the doping concentration of each ZnO nanorods was deduced. Our KPFM results show that the average work function difference between the p-type and n-type regions of p-n junction ZnO nanorod is about ~85meV. This value is in good agreement with the difference in the work function between As-doped p- and n-type ZnO nanorods (96meV) measured with the same conditions. This value is smaller than the expected values estimated from the energy band diagram. However it is explained in terms of surface state and surface band bending.

• Resources Recycling
• /
• v.1 no.1
• /
• pp.58-68
• /
• 1992

A process development for direct synthesis of high pure ZnO powders from zinc-bearing waste was investigated. This waste contains a 55% of zinc and it was extracted by the sulfuric acid(leaching). After removal of iron ion by precipitation from the zinc solution, the purification through a solvent extraction by the use of D2EHPA as an extractant was carried out. Then, loaded zinc in organic solution was stripped and precipitated simultaneously using a precipitant such as oxalic acid. Then, loaded zinc in organic solution was stripped and precipitated simulataneously using a precipitant such as oxalic acid. The synthesized $ZnC_2O_4$ powders by the precipitation stripping method was calcined to obtain more than 99.9% of ZnO powders. The effect of sulfuric acid concentration, leaching time, pulp density on the extraction of zinc was studied and the optimum conditions for the solvent extraction were obtained through the investigation of purification of zinc solution. The size, morphology and size distribution of synthesized $ZnC_2O_4$ powders were studied in terms of oxalic acid concentration, temperature, surfactant added, precipitation time, etc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.12
• /
• pp.1219-1227
• /
• 2014

For development of the surface acoustic wave bandpass filter(SAW-BPF), we fabricated the high quality ZnO thin films through the step-by-step(double) deposition using two different deposition methods which are pulsed laser deposition(PLD) and RF sputtering techniques. The second growth of ZnO thin films was completed by RF sputtering method on the first ZnO thin films pre-deposited by PLD method. The characteristics of ZnO thin films were analyzed by XRD, SEM and AFM systems. The FWHM of ${\omega}$-scan analysis and the minimum RMS value of surface roughness of step-by-step grown ZnO thin films were $0.79^{\circ}$ and 1.108 nm respectively. As a result, the crystallinity and the preferred orientation of the grown ZnO thin films were kept good quality and the surface roughnesses of those were improved by post-annealing process as comparison with ZnO thin film fabricated by the conventional PLD technique only. Using these proposed ZnO thin films, we demonstrated the RF device such as SAW-BPF, built by the proposed ZnO thin films, shows that it has the bandwidth of 2.98 MHz and the insertion loss of 36.5 dB at the center frequency of 260.8 MHz, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.189-193
• /
• 2012

ZnO nanorods were grown on the $Cd_xZn_{1-x}O$ seed layers with various Cd mole fractions by hydrothermal method. The effects of the Cd mole fraction for $Cd_xZn_{1-x}O$ seed layers on the structural and optical properties of the ZnO nanorods were investigated by scanning electron microscopy, X-ray diffraction, and photoluminescence. The narrowest full-width at half-maximum and largest grain size of the $Cd_xZn_{1-x}O$ seed layers, indicating improvement in crystal quality, were observed at the Cd mole fraction of 0.5. At the Cd mole fraction of 0.5, the largest enhancement in the density, the crystal quality, and the growth rate of the ZnO nanorods was observed while their appearance was not affected significantly by the incorporation of the Cd in the $Cd_xZn_{1-x}O$ seed layers. Consequently, the luminescent properties of the ZnO nanorods were enhanced. The largest improvement in the structural and optical properties of the ZnO nanorods was observed at the Cd mole fraction of 0.5.

• Advances in nano research
• /
• v.1 no.1
• /
• pp.59-70
• /
• 2013

ZnO nanostructures of rod-like, faceted bar, cup-end bars, and spindle shaped morphologies could be grown by a low power ultrasonic synthesis process. pH of the reaction mixture seems to plays an important role for defining the final morphology of ZnO nanostructures. While the solution pH as low as 7 produces long, uniform rod-like nanostructures of mixed phase (ZnO and $Zn(OH)_2$), higher pH of the reaction mixture produces ZnO nanostructures of different morphologies in pure hexagonal wurtzite phase. pH of the reaction as high as 10 produces bar shaped uniform nanostructures with lower specific surface area and lower surface and lattice defects, reducing the defect emissions of ZnO in the visible region of their photoluminescence spectra.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.6
• /
• pp.363-367
• /
• 2022

Transparent ZnO/Ti/ZnO (ZTZ) tri-layered films were prepared with radio frequency (RF) and direct current (DC) magnetron sputtering on the glass substrate. The thickness of the ZnO and Ti films was kept at 50 and 10 nm to consider the effect of the electron irradiation on the crystallization and optoelectrical properties of the films. From the XRD spectra, post-depostion electron irradiated films showed the characteristic peaks of ZnO(002) and Ti(200), respectively. the observed grain size of the ZnO(002) and Ti(200) enlarged up to 18.27 and 12.16 nm at an irradiation condition of 750 eV. In the figure of merit which means an optoelectrical performance of the films, as deposited films show a figure of merit of 2.0×10^-5 𝛺^-1, while the films electron irradiated at 750 eV show a higher figure of merit of 5.7×10^-5 𝛺^-1.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.6
• /
• pp.334-337
• /
• 2017

In this paper, to develop the ceramics with high $d_{33}$ and high $Q_m$ for ultrasonic transducer applications, $0.10Pb(Ni_{1/3}Nb_{2/3})O_3-0.07Pb(Mn_{1/3}Nb_{2/3})O_3-0.83Pb(Zr_{0.5}Ti_{0.5})_{0.83}O_3$ (PNN-PMN-PZT) ceramics were sintered at $940^{\circ}C$ using $CuO-Li_2CO_3-Bi_2O_3$ (CLBO) as a sintering aid by a traditional solid-state technique. The influence of zinc oxide additive on the physical properties of the prepared ceramics were systematically investigated. The R-T (rhombohedral-tetragonal) phase coexistence was found in the ceramics without zinc oxide additive and with increasing amounts of ZnO additive, the specimens showed a tetragonal phase. The formation of a liquid phase between ZnO and $Bi_2O_3$ contributed significantly to the grain growth of specimens. For the 0.1 wt% ZnO ceramics, the optimal physical properties of $d_{33}=370pC/N$, ${\varepsilon}_r=1,344$, $k_p=0.621$, and $Q_m=1,523$ were obtained.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1347_1348
• /
• 2009

We fabricated FEDs based on ZnO nanowires. ZnO nanowires were synthesized on Au thin films by hydrothermal method on hot plate. After 2 hours, we obtained nanowires of chin form. The high-purity nanowires showed sharp tips geometry with a wurtzite structure. The field emission properties of the ZnO nanowires were investigated in high vacuum chamber. The turn-on field for the ZnO nanowires was found to be about 4.1 V/${\mu}m$ at a current density of $0.1{\mu}A/cm^2$.