• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.1
• /
• pp.31-38
• /
• 2019

In this paper, we develop a beamforming front end platform with pipeline circuit configuration method that can apply various clinical diagnostic applications of ultrasound image technology. Hardware design targets compression applications as well as scalable applications where power, integration levels and replication possibilities are important. Firmware design was implemented to achieve optimal FPGA parallel processing level by constructing new IP and system-oriented design environment to accelerate design productivity with maximum productivity improvement using Vivado HLS tool, which is a next generation high level synthesis tool. Former supports the high-speed management function of scan data that can create an image area arbitrarily and can be appropriately corrected and supplemented when reconfiguring or changing system specifications in the future.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.481-487
• /
• 2023

In this study, we analyzed the incidence of side effects of photoneutron dose according to the number of beams during intensity-modulated radiotherapy of prostate cancer using 15 MV. The radiation treatment plan design for intensity-modulated radiation therapy for prostate cancer was established with a prescription dose of 220 cGy per dose and a total of 7260 cGy for 33 treatments. The linear accelerator used in the experiment is Varian's True Beam STx (Varian, USA). Photoneutron dose was generated by using 15 MV energy in the planning target volume (PTV). The treatment plan was designed with IMRT 5, 7, and 9 portals using the Eclipse System (Varian Ver 10.0, USA). An optically stimulated luminescence albedo neutron dosimeter (Landauer Inc., USA) was used to measure photoneutron dose. IMRT 5 portals, 1.7 per 1,000, 7 portals, 1.8 per 1,000, 9 portals, 2.0 per 1,000 were calculated as the probability of experiencing side effects on the thyroid gland due to photoneutron dose. This study studies the risk of secondary radiation exposure dose that can occur during intensity-modulated radiation therapy, and it is considered that it will be used as useful data in relation to stochastic effects in the future.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.39-50
• /
• 2007

Barrier VII program is normally used for the design of flexible barrier, but if modelled properly it can be used for the analysis of vehicle impact to small sign posts. In this paper sign post is shown to be modelled as flexible barrier by combining beam and column elements at each beam node. Simulations with the Barrier VII program have been made for 7 impact cases composed of sign posts of circular and H section with rigidly connected support and breakaway support system. The impact speed used for the simulation ranged from 30km/h to 110km/h. The study shows that in the vehicle impacts to a circular sign post with high speed, the large deflection and high inertia force causes the sign plate to hit the windshield leading to a hazard to the occupants. It is also shown that impact to H section post results in small deflection of the post and abrupt velocity change and high deceleration of the impact vehicle causing severe damage to both the vehicle and occupants. Simulation study also shows that breakaway support system eliminates the potential danger of the vehicle impact to the rigidly connected small sign posts by reducing deflection of the post, abrupt change in velocity and deceleration level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4405-4410
• /
• 2015

Two-dimensional displacements are obtained from the sandwiched patterns, which superpose two linearly-periodic patterns orthogonally, respectively. The transparent top pattern is identified by deflection of the laser beam due to a difference of refractivity and the opaque bottom pattern is identified by deviation of the beam intensity due to a difference of reflectance. In the sample setup, the top pattern made up of build-up film is manufactured by UV laser machining and the bottom pattern is manufactured by ultra-precision trench machining and deposition for aluminum plate. The proposed decoding method is verified experimentally using the $10{\mu}m$ equally spaced sample patterns and the devised optical system. The Korea Academia-Industrial cooperation Society.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.9-18
• /
• 1998

In this paper, we present the degradation of focusing induced by velocity inhomogeneity in human tissue. For simulation, the fatty layer which is the major factor of degradation for its lower velocity, is modeled as a uniform velocity perturbation layer. And we simulate the degradation of resolution resulting from change of beam path due to refraction and the time delay due to velocity difference. We show that focusing error can be compensated for considering the velocity inhomogeneity only. The proposed compensation method can be operated in real time in the presently used digital focusing systems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.279-279
• /
• 2013

차세대 태양전지로 주목받는 화합물 박막 태양전지(CIGS, CdTe, etc)는 광흡수계수가 매우 높아 얇은 두께의 광흡수층으로도 빛을 효과적으로 흡수할 수 있으므로 광흡수층의 역할이 매우 중요하며 이에 대한 정확한 정보와 이해는 필수적이다. 특히 GIGS 박막 태양전지의 정량 및 각 원소의 깊이 방향의 분포를 분석하는 것은 박막형 태양전지 개발에 크게 기여한다 [1,2]. 본 실험에서는 조성비를 알고 있는 균질한 CIGS박막을 표준시료로 사용하여 ICP-MS로 측정하여 평균농도를 구한 뒤 TOF-SIMS, D-SIMS, Auger Electron Spectroscopy (AES) 로 깊이 방향 분석 결과를 통해 상대감도(RSF)를 계산한 후 각 원소의 농도로 변환하여 정량분석 결과를 얻었다. 일반적으로 손쉽게 정량적인 정보를 얻는 AES에 비해 정량성이 떨어지는 TOF-SIMS와 D-SIMS는 스퍼터링시 사용되는 Cs 빔과 시료 내 금속과의 클러스터 이온(GaCs+와 InCs+)의 깊이 방향 조성을 이용하면 매트릭스 효과를 배제할 수 있어서 좀 더 정확한 정량 분석이 가능하므로 시료내 금속과 Cs 이 결합된 클러스터 이온의 깊이 방향 조성을 측정하여 각원소의 농도를 계산하였고 스퍼터링 에너지를 포함한 실험 변수에 따른 재현성 및 정량성의 차이를 비교분석하였다. 또한 CIGS층에 불순물로 들어 있는 미량원소들의 깊이 분포도도 함께 관찰하였다.

• Fire Science and Engineering
• /
• v.22 no.5
• /
• pp.43-47
• /
• 2008

Recently SIMS has attracted interest as new technique to distinguish the primary and the secondary arc beads. A Cs+ primary ion beam was used to detect the $^{12}C^-$, $^{63}Cu^-$, $^{18}O^-$, $^{35}Cl^-$ secondary ions which are formed during depth profiles in the copper wires. In this work, we studied thermal diffusion in the copper wire which are occurred with supplying over-current. The results demonstrated that Carbon and Chloride are diffused in PVC-coated copper wire deeper than none PVC-coated. However Oxygen showed the reverse diffusion property.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4726-4732
• /
• 2013

The Domestic boat has been manufactured by hull form of typical foreign boat. In this study, design environment for polyethylene boat is analysed to create new hull form of the boat and design elements are extracted from existing boats and consumer preferences. Key elements in polyethylene boat design are three words "semi-classic, urban and sporty". Hull resistance and engine power for new developed boat can be expected by Orca 3D program. This result indicates that engine power of the boat is much less than that of commercial boat.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.1-11
• /
• 2012

This paper describes the transmit/receive(T/R) module for the space based X-band active phased array radar. T/R module is the integrated module which is assembled by the transmitting and receiving RF semiconductor devices to enable the electronically beam steering of the phased array antenna and the key component of the SAR payload. T/R module can selectively receive the polarization signals by the switch according to the established technology but now the technological trend of the T/R module is to receive the horizontal and vertical polarization signal simultaneously. Therefore the research and development of the dual polarization receiving channel T/R module is actively in progress. In this study, as the prior research for the next generation SAR payload, the technological trend of the active phased array radar T/R module and the result of the preliminary design of the dual receiving channel T/R module were described.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.2
• /
• pp.83-90
• /
• 2000

In this paper, a stacked circular-disk microstrip 1${\times}$4 array antenna was designed and manufactured and tested to apply in next generation mobile communication, on IMT-2000 system(up-link: 1.885 GHz∼2.025 GHz, down-link: 2.11 GHz∼2.2 GHz) base station which has dual frequency, broadband and high-gain characteristics. The experimental results are as follows : resonant frequency of 1.885 GHz and 2.178 GHz VSWR (1.064 , 1.432), return loss (-30.19 dB , -24.99 dB), band width (VSWR<2) are 402 MHz, -3dB beam width at radiation pattern are ${\alpha}$E-16.8$^{\circ}$, ${\alpha}$H-69$^{\circ}$(1.885 GHz) and ${\alpha}$E-l5.2$^{\circ}$, ${\alpha}$H-51.5$^{\circ}$(2.178 GHz), gain(13.7 dBi∼15.21 dBi).