• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.1-9
• /
• 2007

In this paper, we propose a new 3D modeling and rendering system using multiple stereo cameras. When target objects are captured by cameras, each capturing PC segments the objects and estimates disparity fields, then they transmit the segmented masks, disparity fields, and color textures of objects to a 3D modeling server. The modeling server generates 3D models of the objects from the gathered masks and disparity fields. Finally, the server generates a video at the designated point of view with the 3D model and texture information from cameras.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.156-168
• /
• 2013

Drilling expedition #1 in 2007 and drilling expedition #2 in 2010 were performed for gas hydrate resources evaluation and optimal site selection of pilot test in Ulleung basin, East Sea, Korea. This study presents to build the 3D spatial distribution models using the estimated sedimentary facies, porosity, and gas hydrate saturation derived by well logs and core analysis data from UBGH1-4, UBGH1-9, UBGH1-10, UBGH1-14, UBGH2-2-1, UBGH2-2-2, UBGH2-6, UBGH2-9, UBGH2-10 and UBGH2-11. The objective of 3D spatial distribution modeling is to build a geological representation of the gas hydrate-bearing sediment that honors the heterogeneity in 3D grid scale. The facies modeling is populating sedimentary facies into a geological grid using sequential indicator simulation. The porosity and gas hydrate saturation modeling used sequential Gaussian simulation to populate properties stochastically into grid cells.

• Geophysics and Geophysical Exploration
• /
• v.21 no.4
• /
• pp.213-219
• /
• 2018

In this study, we simulated 3D wave propagation modeling using a Xeon Phi x200 processor and compared the parallel computation performance with that using a Xeon CPU. Unlike the 1st generation Xeon Phi coprocessor codenamed Knights Corner, the 2nd generation x200 Xeon Phi processor requires no additional communication between the internal memory and the main memory since it can run an operating system directly. The Xeon Phi x200 processor can run large-scale computation independently, with the large main memory and the high-bandwidth memory. For comparison of parallel computation, we performed the modeling using the MPI (Message Passing Interface) and OpenMP (Open Multi-Processing) libraries. Numerical examples using the SEG/EAGE salt model demonstrated that we can achieve 2.69 to 3.24 times faster modeling performance using the Xeon Phi with a large number of computational cores and high-bandwidth memory compared to that using the 12-core CPU.

• Geophysics and Geophysical Exploration
• /
• v.27 no.1
• /
• pp.37-50
• /
• 2024

The magnetotelluric (MT) survey can be affected by external environmental factors. In particular, when acquiring MT data in islands, it is essential to consider the combined effect of topography and sea to understand the results and make accurate interpretations. To analyze the MT response (apparent resistivity, phase) with consideration of the effect of topography and sea, a small cone-shaped island model surrounded by deep sea was created. Two-dimensional (2-D) and three-dimensional (3-D) forward modeling were performed on the terrain model considering topography and the island model considering both topography and sea. The 2-D MT response did not reflect the topographic and sea effect of the direction orthogonal to the 2-D profile. The 3-D MT response included topographic and sea effects in all directions. The XY and YX components of the apparent resistivity were separated on undulating topography, such as a hill. A conductor at 1 km below sea level could be distinguished from topographic and sea effects in the MT response, and low resistivity anomaly was attenuated at greater depths. This study will facilitate understanding of field data measured on small islands.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.1
• /
• pp.139-148
• /
• 2006

The dynamic characteristics of a bridge deduced by using the modeling techniques depend on its stiffness and mass calculated from its geometric model. This research develops the FE modeling techniques for a steel plate girder bridge with composite section. and proves their validity by comparing the results with those from actual measurement. The FE modeling techniques are divided into two categories--a simplified one and two-dimensional model and a detailed three-dimensional model. In the meantime, the dynamic responses of the bridge tested for this research were measured by the ambient vibration some of accelerometers were been attached to its upper slab girder under normal traffic load. The Cross Power Spectrum obtained from the measurement was used to analyze the dynamic characteristics by natural excitation techniques. The analytic results are compared to those of each FE modeling, and thereby the modeling techniques were proved to be valid.

• Geophysics and Geophysical Exploration
• /
• v.4 no.3
• /
• pp.70-79
• /
• 2001

The integral equation method is a powerful tool for numerical electromagnetic modeling. But the difficulty of this technique is the size of the linear equations, which demands excessive memory and calculation time to invert. This limitation of the integral equation method becomes critical in inverse problem. The conventional Born approximation, where the electric field in the anomalous body is approximated by the background field, is very rapid and easy to compute. However, the technique is inaccurate when the conductivity contrast between the body and the background medium is large. Quasi-linear, quasi-analytical and extended Born approximations are novel approaches to 3-D EM modeling based on the linearization of the integral equations for scattered EM field. These approximation methods are much less time consuming than full integral equation method and more accurate than conventional Born approximation. They we, however, still approximate methods for 3-D EM modeling. Iterative series methods such as modified Born, quasi-linear and quasi-analytical can be used to increase the accuracy of various approximation methods. Comparisons of numerical performance against a full integral equation and various approximation codes show that the iterative series methods are very accurate and almost always converge. Furthermore, they are very fast and easy to implement on a computer. In this study, extended Born series method is developed and it shows more accurate result than that of other series methods. Therefore, Iterative series methods, including extended Born series, open principally new possibilities for fast and accurate 3-D EM modeling and inversion.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.33-42
• /
• 2002

A method of automatic 3D tunnel modeling is proposed. The proposed method used the parametric representation of geometry and a hierarchical and relational data structure. These two bases provide the generalization and extension for 3D tunnel modeling. Especially, these two fundamentals ion the basis iota representing the characteristics of the tunnel structure for analysis. The constant-curvature characteristic is exploited to generate 3D mesh on the tunnel surface. This is attributed to the advantage that any 2D automatic mesh generation algorithm can be applied to 3D mesh modeling.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.459-465
• /
• 2015

There exist different kinds of aircrafts, such as conventional airplane, rotorcraft, fighter, and unmanned aerial vehicle. Their shape and feature are dependent upon their own assigned mission. One of the fundamental analyses performed during the aircraft design is the structural analysis. It becomes more complicated and requires severe computations because of the recent complex trends in aircraft structure. In order for efficiency in the structural analysis, a simplified approach, such as equivalent beam or plate model, is preferred. However, it is not clear which analysis will be appropriate to analyze the realistic configuration, such as an aircraft wing, i.e., between an equivalent beam and plate analysis. It is necessary to assess the limitation for both the one-dimensional beam analysis and the two-dimensional plate theory. Thus, in this paper, the static structural analysis results obtained by EDISON solvers were compared with the three-dimensional results obtained from MSC NASTRAN. Before that, EDISON program was verified by comparing the results with those from MSC NASTRAN program and other analytic solutions.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.271-274
• /
• 2003

MPEG-4 시스템은 XMT(Extensible MPEG-4 Textual format)(1)라고 하는 텍스트 형태의 씬 디스크립션을 정의하고 있는데, 이는 XMT형태의 포맷을 다양한 재생 환경에서 상호 교환하여 사용하도록 하기 위해서이다. 본 논문에서는 XMT에서 정의하는 2가지 파일 포맷을 생성해내는 저작 도구를 소개하고, XMT-A 형태의 파일포맷을 VRML로 변환하기 위한 방법을 제시한다. VRML은 3차원 객체를 모델링하는 언어이고, XMT-A는 2차원과 3차원 객체를 모두 지원하기 때문에 발생하는 문제를 해결하기 위해서, 본 논문에서는 XMT-A를 VRML로 변환할 때, VRML에 없는 2차원 노드에 대한 표현방법을 제공한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.300-305
• /
• 1994

차실 음향 공동의 특성을 유한요소법에 의해 해석하고자 할 때, 과거에는 차실 음향공동과 트렁크 음향공동과의 상호연성을 고려하지 않고, 두 공동의 경계면을 강체 경계조건으로 생각하여 해석 대상 모델을 차실 음향 공동만으로 국한시켰다. 이러한 해석 방법을 통해서는, 차실과 트렁크 공동이 완전히 밀폐되어 있지 않고 단지 뒷좌석에 의해 두 공동이 구별되어지는 차종에 대해서는 실험과 근접하는 유한요소해석 결과를 얻을 수 없다. 그러므로 차실 공동과 트렁크 공동의 경계면을 가상의 탄성벽 경계조건으로 생각하여 그 탄성벽을 통한 두 공동의 상호 연성을 고려하는 유한요소 모델을 구현하여야 한다. 실제로 트렁크가 차실에 미치는 연성효과를 고려하여 유한요소해석을 수행할 경우 차실의 고유진동수와 고유모드에 미치는 영향이 상당히 큰 것을 확인할 수 있었다. 이하 본 내용에서는 차실과 트렁크 공동, 그 사이의 탄성벽을 이론적으로 해석 가능한 1차원으로 모델링하여 실험 결과와 근접하는 3차원 유한요소 모델링 기법을 제시한다.