• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.896-897
• /
• 2015

본 논문에서는 IPM type BLDC 전동기의 진동 저감 방안에 대해서 연구하였다. 전자기적 진동 발생원 중 주된 요인이 되는 코깅 토크와 반경방향 힘의 불평형에 대해서 노치를 설치하여 코깅토크를 최소화한 모델과 반경반향의 힘인 가진력을 평형화한 모델의 설계를 수행하였다. 각 모델에 대한 주파수별 진동원을 분석하고 진동 실험의 결과와 비교하여 분석하여 그 타당성을 입증하였다.

• Journal of Industrial Convergence
• /
• v.21 no.6
• /
• pp.37-42
• /
• 2023

This study aimed to examine the safety of HemoHIM, a dietary supplement containing methoxsalen. HemoHIM is a dietary supplement marketed globally, and a competitor to ginseng. It has been reported to contain methoxsalen, a plant extract for treating psoriasis and vitiligo. Methoxsalen is known to cause hepatotoxicity, but most of the cases has been reported from ingestion as a drug, not a food. There are no reports of hepatotoxicity from the consumption derived from natural products such as Angelica gigas, Cnidium officinale, and Paeonia lactiflora, which are the main ingredients in the HemoHIM. However, a recent case of acute hepatitis was reported in Hong-Kong after ingestion of HemoHIM. It is difficult to conclude that hepatitis was caused by HemoHIM, because there was no check of co-occurring medications with a higher risk of hepatotoxicity, no description of the progress, no quantitative comparison of methoxsalen in HemoHIM to it in common foods such as carrots and celery, and no description of the patient's underlying diseases. On the other hand, there was a study that suggest hemoHIM is safe, and that study had adequate number of subjects even though more studies are needed to ensure safety.

• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.112-115
• /
• 2009

In nature, some creatures have the ability to walk vertically or upside down on various natural surfaces. One of them, Tokay Gecko has billions of nano-hair at the epidermis of its digital. These nano hairs makes atomistic attractive force to the surface, therefore, it could walk and run on the vertical or upside surfaces. Recently, many researchers tried to fabricate the dry adhesive structure mimicking the nano-hair structure. in this study, I tried to survey these studies to discuss the direction of future fabrication works of dry adhesive structures.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.6
• /
• pp.255-266
• /
• 1997

본 논문의 목적은 내진상세를 가진 철근콘크리트 골조의 비탄성 거동 예측에서 현재 사용되고 있는 해석적 방법이 가지는 신뢰성을 검토하고 실험에서 실측할 수 없었던 내부 힘의 분포 및 변화과정을 관찰하는 것이다. 이를 위하여 이미 실험이 수행된 2경간 2층 내진상세 모멘트-저항 철근콘크리트 평면골조(1)를 대상으로 ICARC 2D 프로그램(3)을 사용하여비탄성해석을 수행하였다. 해석결과가 실험결과에 최대한 일치하도록 관련 모델 변수들을 조절하였다. 이러한 해석결과가 실험결과와 어느 정도 일치하는 지 비교하였으며, 해석결과 얻어진 내부 힘의 발전과정을 관찰한결과 다음과 같은 결론에 도달하였다. (1)전체 횡력-횡변위 관계는 실험결과에 매우 유사하게 해석결과를 얻을 수 있다. (2)구조물의 힘의 분포 및 재분재 과정에 관련하여 해석은 구체적인 정보를 제사하였으며 실험결과 나타난 균열 및 변형결과와 대체로 일치한 소성힌지 발생과 파괴메카니즘을 나타내어 그 유용성을 입증하고 있다. (3)해석결과가 대체로 실험결가아 일치하나 국부거동과 관련하여 일부분 실제거동과 상당한 차이를 나타내어, 보다 정확한 모델을 개발할 필요성을 느낀다.

• Journal of the KSME
• /
• v.27 no.5
• /
• pp.421-427
• /
• 1987

공력소음은 공기역학적 힘에 의해서나 또는 유동 내에서의 난류와 같은 유체운동에 의해서만 발 생되는 소리와 관계되며, 진동하는 바이올린 줄이나 확성기의 진동에 의해서 발생되는 즉, 고체 표면의 진동에 의해서 발생되는 고전적인 음향학과는 무관하다. 그리고 여기서는 주로 공력 소음문제를 다루되 자세하고 엄밀한 수학적 전개보다는, 간단한 실제적인 예를 들어서, 물리적 메카니즘을 가능한 한 자세히 기술하여 공력 소음의 이해를 돕고자 하였다. 또한 오래된 고전적 방법을 가능한 한 피하고 최근의 방법으로 설명하도록 하였다.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.395-402
• /
• 2009

The atomic force microscopy(AFM) has been used, as a powerful tool, to investigate physical properties of supported-lipid layers. Prior to the advent of the AFM, no observation was performed for the physical phenomena at the nanometer-scale. This microscope provides nanometer-scale morphology by scanning surfaces with the cantilever and presents force curve by monitoring the behavior of the cantilever that approaches to surface and retracts from the surface. From the morphology, the structures of the supported lipid layer and the effect of other molecules on the structures have been investigated. From the force curve, the surface properties-electrostatic and mechanical properties-of the supported lipid layers have been studied. In this article, characterization of the structure and surface properties of the supported lipid layer is explained. Future perspectives and direction are also discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5323-5329
• /
• 2013

Many companies have tried to develop the horizontally vibrating linear motor, for sliming the smart phone. Mathematical modeling and analysis is one of method to simulate the dynamic performance of the horizonatally vibrating linear motor. However, the horizontally vibrating linear motor vibrates in twisting mode because there are two kinds of force acting on the vibrating part. One is are the horizontal force by Lorentz force. The other is the vertical force by attraction force between magnet of vibrating part and bracket and the gravity force of vibrating part. However, those are very difficult to be included in mathematical modeling which generate the simulation errors. In this paper, we perform MFBD (multi flexible body dynamics) simulation using commercial dynamic analysis program "DAFUL". In our new model, the force effects those are neglected in mathematical model, are included. For the verification, the simulation results are compared with the experiment results with manufactured prototype.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.235-238
• /
• 2002

작업관련성 근골격계질환(work-related musculoskeletal disorders)은 힘, 작업자세, 진동, 심리적 스트레스, 개인차 등 여러 가지의 신체적 작업 부하 요인에 의해 발생하는 것으로 알려져 있다. 이러한 요인 중 부적절한 작업자세가 근골격계질환의 주요한 발생요인으로 알려져 있는데, 2000년도 우리나라에서 업무상질병자로 인정된 작업관련성 근골격계질환자 중 부적절한 작업자세로 인한 질환자가 89%, 반복작업 63.7%, 무리한 힘 53%, 진동 6.6%, 신체접촉에 의한 질환자가 1.1%로 조사되었다. 특히 부적절한 작업자세 중 비트는 자세로 인한 질환자가 87.2%로 가장 많았으며, 신체부위별로도 허리부위 질환자 중 부적절한 작업자세로 인한 질환자가 83.6%로 가장 높은 것으로 나타났다.(중략)

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.981-984
• /
• 2003

A novel linear ultrasonic motor for precision position control was designed and fabricated. It was composed of two piezoelectric actuators with longitudinal ultrasonic fluctuations and shaking beam. When two AC electric fields (Usinwt, Ucoswt) were applied to piezoelectric actuators respectively, the middle part of shaking beam had an elliptical trajectory. According to experimental results, the generative force was proportional to pre-load force but the speed of slider was in inverse proportion. And the bar of shaking beam had a same trajectory with simulation result.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.3
• /
• pp.275-281
• /
• 2011

When a flat bar type metal specimen for general tension test is subject to incremental uniaxial tension, a narrow plastic shear band, so called luders band, is generated at some instance. This band typically has an angle to the axis of specimen and many early researches have been done to investigate the condition and angle of this localized deformation phenomenon by many researchers. This study follows the procedure of Thomas(1961) under plane stress boundary condition. $J_2$ plasticity theory, balance of linear momentum, and constitutive equations are used to derive the angle of luders band under plain strain boundary condition. The result was confirmed by other angle based on acoustic tensor theory.