• Resources Recycling
• /
• v.14 no.6 s.68
• /
• pp.60-63
• /
• 2005

It was possible to understand the adsorption characteristics of ions in aqueous environment based on the variations of PZC and IEP of particles when adsorption of ions on particle surface occurred. The specific adsorption of $Cu^{2+}$ ion upon chalcopyrite surface provoked a lowered PZC, which was considered to be due to increased adsorption of OH- ion via the electrostatic attraction between the two ions. On the contrary, IEP of chalcopyrite was observed to rise when Cu2+ was specifically adsorbed on its surface. The reason for this could be explained by the necessity of the increase of pH to offset the positively increased surface potential of chalcopyrite for the reestablishment of IEP. Neither PZC or IEP of chalcopyrite was observed to change when non-specific adsorption occurred since no change in the surface potential of chalcopyrite was invoked under this condition.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.5
• /
• pp.35-40
• /
• 2012

In this study, adsorption characteristics of expanded graphite (EG) were investigated by a series of batch adsorption tests using p-Xylene as a model volatile organic compounds (VOCs). After acid treatment, graphite were expanded at various temperature from $600^{\circ}C$ to $1000^{\circ}C$ for one minute. The optimal temperature was $800^{\circ}C$, where the expansion ratio reached 195 times of original volume. The BET specific surface area of EG was $92.4m^2/g$, which was only 1/10 of granular activated carbon (GAC), however the adsorption of p-Xylene by EG was almost completed within 5 minutes while that of GAC continued for 7 days because the majority of pores of EG was consisted with meso- and macro-pores. According to the Langmuir isotherm analysis, the maximum specific adsorption of p-Xylene onto EG was 24.0 mg/L with the adsorption constant of 7.94. In conclusion, the adsorption capacity of EG was much less than that of GAC due to the significantly lower specific surface area, but the first order kinetic constant was more than 500 times larger than GAC. Overall, EG might be effective where the fast adsorption is required.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.8
• /
• pp.663-672
• /
• 2009

In this studies, the adsorption test using Chlorella pyrenoidosa was conducted to examine the effect of Pb adsorption according to various immobilized methods such as Ca-alginate, K-carrageenan, and Polyacrylamide. From the results, the duration to need to reach adsorption equilibrium was delayed according to the immobilization. And, the higher adsorption capacity of immobilized Chlorella pyrenoidosa was represented in the higher concentration of Pb, the smaller amount of immobilizing agent, and the higher pH of solution. The maximum adsorption capacity of Pb was shown in the adsorption test using Chlorella pyrenoidosa immobilized with Ca-alginate even though it was sensitive pH. The adsorption results properly represented with Freundlich isotherm equations. And, pseudo second-order chemisorption kinetic rate equation was applicable to all the biosorption data over the entire time range. The FT-IR analysis showed that the mechanism involved in biosorption of Pb by Chlorella pyrenoidosa was mainly attributed to Pb binding of carbo-acid and amide group. Adsorbed Pb on immobilized Chlorella prenoidosa was easily desorbed in the higher concentration of desorbents(NTA, HCl, EDTA, $H_2SO_4,\;Na_2CO_3$). Among the several desorbents, NTA showed the maximum desoption capacities of Pb from Chlorella pyrenoidosa immobilized with Ca-alginate and K-carrageenan and EDTA was the most effective in Chlorella pyrenoidosa immobilized with polyacrylamide. The desoprtion efficiency in the optimum condition was 90.0, 83.0, and 80.0%, respectively.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.1
• /
• pp.53-61
• /
• 2011

This study was conducted to confirm the adsorption capacity of CFW(Carbonized Foods Waste), which is produced by the process of recycling waste, in PRB method that Electrokinetic(E/K) method was applied. The batch test was carried out to analyze the adsorption characteristics of CFW for adsorbing the organic compounds. The organic compounds used in the batch test were Phenanthrene and Trichloroethylene(TCE), and the anionic surfactant(SDS) and the nonionic surfactant(Brij$^{(R)}$30) were used for the surfactants. The results of the batch test confirmed that the adsorption efficiency of Phenanthrene was 99% and TCE was 26%. The each compounds compared with the adsorption isotherms, which is calculated by the Langmuir and Freundlich models. The results indicated that Phenanthrene is fitted to the linear Langmuir model, whereas the distribution of TCE is unclear. The results of the batch test used in surfactants confirmed that the adsorption efficiency of CFW using Phenanthrene was reduced to 6~8%. However, the adsorption efficiency of CFW in TCE was increased up to 81% by surfactants. Especially, the nonionic surfactant was excellent in the adsorption of CFW using TCE. Nevertheless, the adsorption efficiency of CFW in Phenanthrene was still higher than TCE. Therefore, the adsorption efficiency of CFW in Phenanthrene was better than in TCE. In PRB method using E/K method, the adsorption of CFW used nonionic surfactant is better to use than the anion surfactants on the organic compounds.

• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.768-775
• /
• 2010

Adsorption dynamics of ethane/ethylene mixture gas and desorption dynamics during the displacement desorption with propane as a desorbent in the column filled with faujasite adsorbent were investigated experimentally and theoretically. The simulation that adopted heat and mass balance and an ideal adsorbed solution theory (IAST) for the multicomponent adsorption equilibrium well predicted the experimental breakthrough curves of the adsorption and desorption. At the adsorption breakthrough experiments, roll-ups of ethane increased as the adsorption pressure increased and the adsorption temperature decreased. During the displacement desorption with propane in the column saturated with ethane/ethylene mixture gas, almost 100% of ethylene was obtained for a certain time interval. The adsorption strength of the desorbent greatly affected the adsorption and re-adsorption dynamics of ethylene. The re-adsorption capacity for ethylene has been greatly reduced when iso-propane, which is stronger desorbent than propane, was used as desorbent. It was found from the simulation that the performance of the displacement desorption process would be superior when the ratio of ${(q_s{\times}b)}_{C_2H_4}/{(q_s{\times}b)}_{C_3H_s}$ was 0.83, that is, the adsorption strengths of ethylene and the desorbent were similar.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.377-385
• /
• 2022

Surface morphology and adsorption characteristics of charcoals prepared from Korean traditional kiln were analyzed, and their moisture adsorption capacities were examined with respect to humidity and temperature change. Moisture adsorption capacities of red-clay powder, activated carbon fiber fabric (ACF fabric) and activated carbon fiber paper(ACF paper) were also examined to compare with those of charcoals. Moisture adsorption capacity of charcoal was low less than 45% humidity due to its hydrophobic property, but it slowly and linearly increased as increasing the humidity. Moisture adsorption capacity of red-clay powder was similar to charcoal at low level humidity, it increased exponentially as increasing the humidity showing Type V adsorption isotherm. Therefore, the weather forecast annal prepared by employee of weather centre in Joseon Dynasty is experimentally approved. ACF fabric and ACF paper show excellent moisture adsorption capacities, which can be used to humidity measuring sensor. Adsorption isotherm of charcoal slice was peculear showing the mixed Type I and Type IV due to low-pressure hysteresis that was occurred from embedment of nitrogen in crevice of charcoal. The specific surface area of charcoal increased by grinding charcoal slice to powder, resulted in increasing the desorption amount of adsorbent at low relative pressure.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.1
• /
• pp.1-4
• /
• 1974

The application of the Distribution Law to soil-pesticide systems yielded the following empirical implications : 1) The amount of the pesticide adsorbed by a soil is negatively proportional to the soil water content. 2) At a given soil water content the amount adsorbed is proportional to the Kd of the soil. 3) The effect of soil water content on the amount of the pesticide adsorbed diminishes with increasing magnitude of the Kd.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.117-124
• /
• 1988

From the test results of the adsorption characteristics of AE admixture, it was shown that the adsorption of AE admixture on fly ash was mearly completed in 30 minutes and the higher was ignition loss, the larger the quantity of saturation adsorption. Because most of the ignition loss of the fly ash was due to the unburned carbon, it could be said that the unburned carbon is the main reason of reduction of air content in AE concrete. On the other hand, in the case of superplasticizer, the amount of saturation adsorption in fly ash was lower than in cement and the same result was obtained in the dispersive effect. But, when using superplasticizer in fly ash substituting concrete, the fludity in the concrete was not decreased.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.131-135
• /
• 2000

We studied adsorption isotherm, surface properties and antibacterial activity of Cu treated activated carbon fiber (ACF). The BET surface area of Cu treated ACF are distributed to $688.2-887.8m^2/g$. The adsorption results show that BET surface areas move gradually to lower value with increasing treated Cu mole concentration. Using t-method, the specific micropore volumes and average pore size were obtained. From the SEM study, it is also observed that many of micropores in activated carbon fiber are blocked surface after the treatment. And we also observed that the activity of E. coli in kind of colon bacillus increases gradually to larger range with increasing Cu mole ratio. From these results, we suggest the antibacterial mechanism for metal treated ACF.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.176-177
• /
• 2003

진공 환경 및 가스에 함유된 미량의 수증기를 정량적으로 분석할 수 있는 계측기는 각종 산업 분야에서 그 필요성이 절실하다. 몇 가지 예를 들면 다음과 같다. 전구 속에 함유된 수증기로 인해 야기되는 텅스텐 필라멘트의 산화현상은 전구의 수명을 현저히 감소시킨다. 밀봉된 금속 전기소자 표면에 흡착된 수증기를 통해 누전 현상이 발생함으로써 소자가 비정상적으로 동작될 우려가 있다. 반도체 산업분야에서는 1 ppb의 수증기가 64 Mb DRAM 제조에 영향을 줄 수 있다는 것이 보고된 바 있다. (중략)