• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.41-49
• /
• 2007

More diversified and strengthened safety regulations require higher safety vehicle with less weight. The structural foam can play a role for restraining section distortion of main body members undergoing bending collapse at vehicle crash. In this study, using structural foam modeling technology, validated in previous work, the bending collapse characteristics were evaluated for two types of circular and actual vehicle body frame sections. With changing the foam filling method, outer panel thickness and section shape, load carrying capability and absorbed energy were observed. The results indicate valuable design strategy for effectively elevating bending collapse performance of body members with foam filled.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.6
• /
• pp.892-896
• /
• 2012

CFRP composites with light weight, high strength, and high elasticity by comparing with metal are widely used rather than previous steel plates. However, CFRP composite material has the weakness at hydrothermal and collapsed impact environment. Especially, moisture absorption into composite material can change molecule arrangement and chemical properties under hydrothermal environment. And static collapse experiment is the research in the differences of absorbed energy and deformation mode between moisture and non-moisture absorbed specimens. This study is compared and analyzed on the progress change of moisture absorption ratio after setting up the temperatures of 60 and 80 degrees C in order to comprehend how the change in the temperature influences on moisture absorption status inside CFRP composite materials.

• Journal of Korean Association for Spatial Structures
• /
• v.6 no.1 s.19
• /
• pp.101-109
• /
• 2006

An initial member sections of steel structures is selected by experience of expert building structural designers. And appropriate member section is designed by repeat calculation through structural analysis. Therefore an initial assumption of member section is necessary for saving the time for structural design and is important to acquire safety of building structures. Also brace damper are generally used to prevent or decrease stuctural damage by its hysteretic behavior in building structures subjected to strong earthquake. Based on plastic design, the initial section of members for architectural steel structures with hysteretic damper braces is presented and seismic effect of structural behavior by the ratio of damper stiffness to structural story stiffness is estimated in this paper.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.6
• /
• pp.619-626
• /
• 2009

The use of thin-walled flexural members has proven to be a practical way to achieve the lowest cost in the construction of prefabricated long-span, low-rise building frames in steel. On the other hand, most of these structures are subjected to corrosion due to environmental exposure, which can reduce their carrying capacity. Corrosion damage is a serious problem for these structures as it causes thickness loss. That is, the class of a section (plastic, compact, non-compact, or slender) may change from one to another due to the loss of thickness of the compression flange and web due to corrosion. In this study, the effects of corrosion on thin-walled members in long-span steel frames were evaluated with regard to the moment-rotation curve, initial stiffness, maximum load capacity, stiffness in the post-maximum capacity, and energy absorption.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.2
• /
• pp.241-245
• /
• 2012

In this study, one type of circular shaped composite tube was used, combined with reinforcing foam and without foam. Furthermore, CFRP (Carbon Fiber Reinforced Plastic) circular member manufactured from CFRP prepreg sheet for lightweight design. CFRP is an anisotropic material which is the most widely adapted lightweight structural member. The crashworthy behavior of circular composite material tubes subjected to static axial compression under same conditions is reported in this paper. The collapse mode during the failure process were observed and analyzed. The behavior of polymeric foams to the tubes crashworthiness were also investigated.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.603-608
• /
• 2010

In this study, one type of circular shaped composite tube was used, combined with reinforcing foam and without foam. Furthermore, CFRP(Carbon Fiber Reinforced Plastic) circular member manufactured from CFRP prepreg sheet for lightweight design. CFRP is an anisotropic material which is the most widely adapted lightweight structural member. The crashworthy behavior of circular composite material tubes subjected to static axial compression under same conditions is reported in this paper. Test was executed in order to compare the results to the energy absorption and collapse shape. The collapse mode during the failure process were observed and analyzed. The behavior of polymeric foams to the tubes crashworthiness were also investigated. According to the experimental results, specimens filled with foam are higher total energy absorption than the other specimens not filled with the foam.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.5
• /
• pp.74-81
• /
• 1995

In this paper, the crushing tests of circular tubes under axial impact loading are conducted to investigate the energy absorption abilities. A cross head with 18kg launched by the compressed air collides against circular tubes. Circular tubes used for this experiment are Al and CFRP laminates, which have 8 ply with $15^{\circ}$ and $45^{\circ}$. The absorbed energy unit mass and volume of the CFRP specimen with $15^{\circ}$ are higher than those of aluminum specimen. CFRP specimen having small stacking angle have better energy absorption abilities than that of large stacking angle.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.30-36
• /
• 2003

궤도(track)는 열차가 안전하고 승차감(乘車感)이 좋게 운행되도록 충분한 강도를 가지고 더욱이 양호한 상태로 정비되어 있어야 한다. 일반적으로, 토목구조물(structure)은 하중을 받으면 변위(變位)ㆍ변형하고, 하중이 없게 되면 원래대로 되돌아간다. 즉, 각 부재는 탄성 한계 내로 응력(應力)이 들어가도록 설계된다. 그러나, 궤도는 열차의 하중과 진동을 궤도 자신의 변위 축적으로 흡수하고 있다. 결국, 처음부터 틀림이 진행되어 가는 것을 전제로 한 유일한 구조물이다. 일반적으로는 스프링 하 중량과 축중(軸重)이 큰 차량이 빠르고 대량으로 주행하게 되면 궤도 틀림이 발생하여 진행한다. 궤도 틀림 파형의 성장은 궤도 틀림이라고 하는 공간적인 파형의 시간적인 추이라고 하는 2차원적인 취급이 필요하다. (중략)

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2000.10a
• /
• pp.268-269
• /
• 2000

액젓은 신선한 선어를 염장하여 자가소화 효소 및 미생물의 작용에 의하여 원료가 분해ㆍ숙성된 액상의 전통 발효식품으로 예로부터 간장 대용, 김치의 부재료로서 널리 사용되어져 왔다. 액젓은 숙성기간 중에 미생물기원의 단백질분해 효소의 작용에 의하여 어육 단백질이 여러 형태의 Peptide로 분해되어 액젓의 풍미를 향상시키며, 항암, 혈압강화, 혈청콜레스테롤강하, 면역증강, 칼슘흡수 촉진 등 광범위한 생리활성기능을 나타내는 것으로 알려져 있다(M. Messina., 1995). (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.62-62
• /
• 2004

최근 신소재인 선진 복합 재료 중 탄소 섬유 강화 플라스틱(이하 CFRP라고 한다. )은 비강도, 비강성이 높기 때문에 경량화가 요구되는 여러 분야, 즉 항공기, 인공위성, 원자로, 자동차 산업분야, 조선 산업분야 등 널리 사용되고 있다. 경량화가 요구되는 분야에 사용되는 구조 부재의 형상은 평판보다는 다양한 형태의 곡면 형상을 뛰는 챌(Shell)의 형상을 갖는다. 또한 이러한 구조물에 충격이 가해 졌을 때 곡면을 갖는 구조물의 충격_응답 및 파괴형태는 평판과는 다른 양상을 보인다.(중략)