• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.4
• /
• pp.49-57
• /
• 2008

The cemetery areas which are occupied more than 1.0 percent of whole land of Korea have widened gradually but the reconnaissance is not being conducted for the cemetery investigation due to deficiencies for budget and manpower of the government. The aim of this study is to find a method to establish the lower cost GIS-based cemetery management system by using hand-held DGPS receiver and Mobile GIS software system for easy cemetery management. The results were evaluated and compared to the RTK GPS method. Since the Cemetery Management System shows every tomb's position on the high resolution satellite imagery with a cadastral data, the map helps to find the interesting places easily. Therefore the system data can be used for various purposes such as planning for land development, dealing with real estate as well as cemetery management.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.2 s.16
• /
• pp.35-46
• /
• 2000

The digital maps, important data to build NGIS, require different scales in the same area. The organization for producing a digital map tries to find product method for digital map with economical efficiency and quality. The objectives of this study is to develope digital map generalization system to solve above problems. In order to develop this system, the work processing for digital map generalization is established, the analysis of related law and analysis on maps in different scales were performed, and each of digital map generalization algorithms was compared. The result of digital map generalization using this system shows that have a good result about positional accuracy which was evaluated by comparison between the generalized 1/25,000 and the corresponding 1/5,000 digital map. Furthermore, this system reduce the time required for 1/25,000 digital map production and the physical data amount by around 80%. In conclusion, the generalization system developed for this research can be useful for the digital map generalization from large scale to small scale digital map.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.75-86
• /
• 2012

Synthetic Aperture Radar(SAR) imaging system is independent of solar illumination and weather conditions; however, SAR image is difficult to interpret as compared with optical images. It has been increased interest in multi-sensor fusion technique which can improve the interpretability of $SAR^{\circ\circ}$ images by fusing the spectral information from multispectral(MS) image. In this paper, a multi-sensor fusion method based on high-frequency extraction process using Fast Fourier Transform(FFT) and outlier elimination process is proposed, which maintain the spectral content of the original MS image while retaining the spatial detail of the high-resolution SAR image. We used TerraSAR-X which is constructed on the same X-band SAR system as KOMPSAT-5 and KOMPSAT-2 MS image as the test data set to evaluate the proposed method. In order to evaluate the efficiency of the proposed method, the fusion result was compared visually and quantitatively with the result obtained using existing fusion algorithms. The evaluation results showed that the proposed image fusion method achieved successful results in the fusion of SAR and MS image compared with the existing fusion algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1218-1227
• /
• 2004

Multi-domain engineering systems include electrical, mechanical, hydraulic, pneumatic, and thermal components, making it difficult to design a system because of their complexity and inter domain nature. In order to obtain an optimal design, a unified design approach for each domain and an automated search method are required. This paper suggests a method for automatically synthesizing designs for multi-domain systems using the combination of bond graph that is domain independent and genetic programming that is well recognized as a powerful tool for open-ended search. To investigate the effect of proposed approach, an eigenvalue design problem is tested for some sample target sets of eigenvalues with different embryos.

• Spatial Information Research
• /
• v.22 no.5
• /
• pp.9-18
• /
• 2014

According to the recent development of the ubiquitous computing environment, the use of spatio-temporal data from sensors with GPS is increasing, and studies on the Semantic Sensor Web using spatio-temporal data for providing different kinds of services are being actively conducted. Especially, the W3C developed the SSNO(Semantic Sensor Network Ontology) which uses sensor-related standards such as the SWE(Sensor Web Enablement) of OGC and defines classes and properties for expressing sensor data. Since these studies are available for the query processing about non-spatio-temporal sensor data, it is hard to apply them to spatio-temporal sensor data processing which uses spatio-temporal data types and operators. Therefore, in this paper, we developed the SWE based on SSNO which supports the spatio-temporal sensor data types and operators expanding spatial data types and operators in "OpenGIS Simple Feature Specification for SQL" by OGC. The system receives SensorML(Sensor Model Language) and O&M (Observations and Measurements) Schema and converts the data into SSNO. It also performs the efficient query processing which supports spatio-temporal operators and reasoning rules. In addition, we have proved that this system can be utilized for the web service by applying it to a virtual scenario.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.57-66
• /
• 2019

Recently, as a part of the production of spatial information by smart cities, three-dimensional reproduction of structures for reverse engineering has been attracting attention. In particular, terrestrial LiDAR is mainly used for 3D reproduction of structures, and 3D reproduction research by UAS has been actively conducted. However, both technologies produce blind spots due to the shooting angle. This study deals with vertical structures. 3D model implemented through SfM-based image analysis technology using UAS and reproducibility and effectiveness of 3D models by terrestrial LiDAR-based laser scanning are examined. In addition, two 3D models are merged and reviewed to complement the blind spot. For this purpose, UAS based image is acquired for artificial rock wall, VCP and check point are set through GNSS equipment and total station, and 3D model of structure is reproduced by using SfM based image analysis technology. In addition, Through 3D LiDAR scanning, the 3D point cloud of the structure was acquired, and the accuracy of reproduction and completeness of the 3D model based on the checkpoint were compared and reviewed with the UAS-based image analysis results. In particular, accuracy and realistic reproducibility were verified through a combination of point cloud constructed from UAS and terrestrial LiDAR. The results show that UAS - based image analysis is superior in accuracy and 3D model completeness and It is confirmed that accuracy improves with the combination of two methods. As a result of this study, it is expected that UAS and terrestrial LiDAR laser scanning combination can complement and reproduce precise three-dimensional model of vertical structure, so it can be effectively used for spatial information construction, safety diagnosis and maintenance management.

• KIISE Transactions on Computing Practices
• /
• v.20 no.12
• /
• pp.670-675
• /
• 2014

Graphical user interfaces (GUI) in modern software deliver information visually, and a well-designed interface can provide information to the use in an organized and intuitive manner while poorly-designed interfaces can cause visual inconvenience and confusion. In order to effectively deliver information to the user, visual attention should be placed on a prominent location in the image. This paper introduces a method based on a human visual system (HVS) that can improve Metro-style GUIs by reducing a user's workload to visually find information. Our method is designed with spatial mapping and color mapping for buttons in the Metro-style GUI. Also we define a metric for Metro-style GUI effectiveness, including an optimization algorithm. The results show that our method improves the performance of visual search tasks in a Metro-style GUI.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.4
• /
• pp.383-393
• /
• 2000

In shared memory multiprocessor systems, false sharing occurs when several independent data objects, not shared but accessed by different processors, are allocated to the same coherency unit of memory. False sharing is one of the major factors that may degrade the performance of memory coherency protocols. This paper presents a new shared memory allocation scheme to reduce false sharing of parallel applications where master processor controls allocation of all the shared objects. Our scheme allocates the objects to temporary address space for the moment, and actually places each object in the address space of processor that first accesses the object later. Its goal is to allocate independent objects that may have different access patterns to different pages. We use execution-driven simulation of real parallel applications to evaluate the effectiveness of our scheme. Experimental results show that by using our scheme a considerable amount of false sharing faults can be reduced with low overhead.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.2
• /
• pp.49-56
• /
• 2008

Image registration is one of the critical techniques of image mosaic which has many applications such as generating panoramas, video monitoring, image rendering and reconstruction, etc. The fundamental tasks of image registration are point features extraction and tracking which take much computation time. KLT(Kanade-Lucas-Tomasi) feature tracker has proposed for extracting and tracking features through image sequences. The aim of this study is to demonstrate the usage of effective and robust KLT feature detector and tracker for an image registration using the sequence image frames captured by UAV video camera. In result, by using iterative implementation of the KLT tracker, the features extracted from the first frame of image sequences could be successfully tracked through all frames. The process of feature tracking in the various frames with rotation, translation and small scaling could be improved by a careful choice of the process condition and KLT pyramid implementation.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.3
• /
• pp.32-42
• /
• 2016

In Korea, the absence of BIM use in existing civil structures and buildings is driving a demand for as-built BIM. As-built BIMs are often created using laser scanners that provide dense 3D point cloud data. Conventional static laser scanning approaches often suffer from limitations in their operability due to the difficulties in moving the equipment, the selection of scanning location, and the requirement of placing targets or extracting tie points for registration of each scanned point cloud. This paper aims at reducing the manual effort using a kinematic 3D laser scanning system based on graph-based simultaneous localization and mapping (SLAM) for continuous indoor mapping. The robotic platform carries three 2D laser scanners: the front scanner is mounted horizontally to compute the robot's trajectory and to build the SLAM graph; the other two scanners are mounted vertically to scan the profiles of surrounding environments. To reduce the accumulated error in the trajectory of the platform through loop closures, the graph-based SLAM system incorporates AdaBoost loop closure approach, which is particularly suitable for the developed multi-scanner system providing more features than the single-scanner system for training. We implemented the proposed method and evaluated it in two indoor test sites. Our experimental results show that the false positive rate was reduced by 13.6% and 7.9% for the two dataset. Finally, the 2D and 3D mapping results of the two test sites confirmed the effectiveness of the proposed graph-based SLAM.