• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.212-213
• /
• 2002

최근에 국내에서도 광학장비개발에 대한 관심이 급속도로 증가하고 있다. 광학장비개발기술의 핵심은 렌즈설계 능력에 달려있다고 해도 과언이 아니다. 더구나 현재 발전추세를 보면 소형 경량화 장비의 개발을 위해 다양한 수단과 방법을 동원하고 있는 실정이다. 특히 렌즈설계에 의한 소형 경량화 목표를 달성하기 위하여 비구면 렌즈 및 회절렌즈의 사용이 불가피하다고 할 수 있다. 본 논문에서는 장파장 적외선 영역에서의 비구면 및 회절면의 사용에 의한 렌즈 성능에 미치는 영향을 분석하여 보았다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.31 no.6
• /
• pp.281-289
• /
• 2020

This paper reports a slim mobile lens design using a hybrid refractive/diffractive optical element. Conventionally a wide field of view (FOV) camera-lens design adopts a retrofocus type having a negative (-) lens at the forefront, so that it improves in imaging performance over the wide FOV, but with the sacrifice of longer total track length (TTL). However, we chose a telephoto type as a baseline design layout having a positive (+) lens at the forefront, to achieving slimness, based on the specification analysis of 23 reported optical designs. Following preliminary optimization of a baseline design and aberration analysis based on Zernike-polynomial decomposition, we applied a hybrid refractive/diffractive element to effectively reduce the residual chromatic spherical aberration. The optimized optical design consists of 6 optical elements, including one hybrid element. It results in a very slim telephoto ratio of 1.7, having an f-number of 2.0, FOV of 90°, effective focal length of 2.23 mm, and TTL of 3.7 mm. Compared to a comparable conventional lens design with no hybrid elements, the hybrid design improved the value of the modulation transfer function (MTF) at a spatial frequency of 180 cycles/mm from 63% to 71-73% at zero field (0 F), and about 2-3% at 0.5, 0.7, and 0.9 fields. It was also found that a design with a hybrid lens with only two diffraction zones at the stop achieved the same performance improvement.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1637-1642
• /
• 2010

In this paper, we present the fabrication of a high-quality diffractive-lens mold having submicron patterns, which is suitable for an ultra-slim optical system. In order to fabricate high-quality diffractive lens with a variety of submicron patterns, the multi-alignment method was used; high-resolution electron-beam lithography and FAB plasma etching were carried out to obtain the patterns. The most important key technology in the multi-alignment method is to reduce alignment error, lithography error, and etching error. In this paper, these major fabrication errors were minimized, and a high-quality diffractive lens with a diameter of $267\;{\mu}m$ (NA = 0.25), minimum pattern width of 226 nm, and thickness of 819 nm was successfully fabricated.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.272-273
• /
• 2003

제조기술이 발전함에 따라 비구면을 사용한 광학계 설계에 대한 많은 연구가 보고 되고 있다. 본 연구에서는 단일렌즈에서 다양한 렌즈면 조합 중에서 성능이 가장 우수하게 나타난 비구회절면(비구면과 회절면을 동시에 적용)을 사용하여 이군렌즈에 대해 F／l.0인 대구경 광학계를 설계하였다. 사용된 검출기 사양은 픽셀 크기 45um, 픽셀 수 320$\times$240 이며, fill factor 는 무시하였다. 광학계의 유효초점거리는 171.73mm 이며, 사용한 프로그램은 ORA 사의 Code V 이다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.496-502
• /
• 2001

We generated a nondiffracting beam and investigated its intensity profile on propagation. We first obtained an annular output beam from Nd:YAG laser with a negative branch unstable ring resonator and, using a 1m focal length lens, we generated a Bessel- Gauss beam. The inner radius of the annular output beam was 2.57 mm and the ring width was 0.145 mm. The intensity profile of the nondiffracting beam did not show any appreciable diffraction up to 33 m distance from the focal lens. This result was compared with the theory.

• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.16-19
• /
• 1992

The Fourier transform spectra of a grating have been employed to determine the refractive index of a simple lens. The shearing interferometric technique is used for collimation testing of the expanded laser beam and for determining the exact focal plane. The slit attached to micro X-Y translator has been used to measure the distance between two sucessive diffraction orders in the back focal plane of the test lens. The experimental equipment is described and results are presented.

• Applied Microscopy
• /
• v.37 no.3
• /
• pp.199-208
• /
• 2007

We have made an optical device to study the wave optics phenomena, such as image and diffraction pattern, constructive and destructive interference, by direct operation of laser beam and optical lenses. It consists of laser beam, goniometer, objective lens, intermediate lens, projection lens, CCD system, and computing system. As a result of the performance test, we were able to magnify samples up to 44 times with the resolution of about $5{\mu}m$. It is expected to help EM users understanding more easily principles of transmission electron microscopy (TEM).

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.392-398
• /
• 2003

We present a novel concept of a phase-shifting diffraction-grating interferometer, which is intended for the optical testing of concave mirrors with high precision. The interferometer is configured with a single reflective diffraction grating, which performs multiple functions of beam splitting, beam recombination, and phase shifting. The reference and test wave fronts are generated by means of reflective diffraction at the focal plane of a microscope objective with large numerical aperture, which allows testing fast mirrors with low f-numbers. The fiber-optic confocal design is adopted for the microscope objective to focus a converging beam on the diffractive grating, which greatly reduces the alignment error between the focusing optics and the diffraction grating. Translating the grating provides phase shifting, which allows measurement of the figure errors of the test mirror to nanometer accuracy.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.1
• /
• pp.37-43
• /
• 1999

Ocular lens failure can be verified by measuring the elastic wave velocity diffraction patterns of monochromatic wave applied with elastic wave were detected using optical heterodyne method. The elastic wave velocity was measured by analysing the diffraction patterns. According to measured results of the longitudinal elastic wave velocity of the middle index-refraction and high index-refraction lens are 6588.5575 m/s and 3973.53 m/s, respectively.

• Korean Journal of Optics and Photonics
• /
• v.25 no.1
• /
• pp.8-13
• /
• 2014

By using finite ray-tracing and curve fitting, a numerical method to determine the non-paraxial pupil function of a high-NA objective is presented. MTF degradations caused by the non-paraxial diffraction effect are analyzed for on-axial imaging of a far-infrared objective and aberration-free ellipsoidal mirror system. The ellipsoidal mirror system has the same paraxial specifications as the far-infrared objective.