• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.87-92
• /
• 1998

TM mode coupling coefficients for a generic five-layer DFB structure with trapezoidal and triangular gratings are calculated using the extended additional layer method. To determine the unperturbed field distributions of TM modes, a grating region is replaced by a new uniform layer whose inverse dielectric constant is the average value of the inverse dielectric constant of grating region in both longitudinal and transverse directions. Based on the self-consistent check, the validity of this method is established by comparing the results calculated by partitioning the grating region up to six uniform layers.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.331-336
• /
• 1995

The steady-state absorption saturation of the photodarkend SDG was investigated. The absorption saturation intensity was observed to increase for the photodarkened sample. The diffraction efficiency of the permanent grating due to photodarkening was also measured using the backward DFWM technique. For the low backward pump intensity, the diffraction efficiency was proportional to the intensity of the pump beam. The origin of increasing diffraction efficiency is attributed to the difference in absorption between the permanent gratings created by photodarkening. ening.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.56-62
• /
• 2004

We present a diffraction grating interferometer of large equivalent wavelength specially designed for flatness testing of rough surfaces. Two transmission diffraction gratings are illuminated on the object under test by use of two measurement beams with different angles of incidence, which yields a large equivalent wavelength. This interferometer design minimizes unnecessary diffraction rays and the systematic error caused by the diffraction gratings, and provides a large working distance and easy alignment. To improve the measurement accuracy, phase shifting technique is applied and the equivalent wavelength error caused by defocus is calibrated. Test results obtained from mirror surfaces and machined rough surfaces are discussed.

• Korean Journal of Optics and Photonics
• /
• v.31 no.4
• /
• pp.176-182
• /
• 2020

The possibility of replacing the condensing-prism film used in conventional backlight units with a light-guide plate engraved with a submicrometer-periodic diffraction grating was investigated. The optimal period for the diffraction grating was determined through simulation and experiment, and the transmission-mode efficiency of the diffraction grating was calculated in terms of the polar angle and azimuthal angle of the incident light. In addition, the effects of the two methods of optimizing the polar angle and the directional angle were compared by simulation, by suggesting the shape and configuration of the light-guide plate, so that more light could be extracted by diffraction. By using a ray-tracing program, the luminance angular distribution of the light-guide plate engraved with the diffraction grating was calculated and compared to the luminance angular distribution for each actual prototype.

• Korean Journal of Optics and Photonics
• /
• v.28 no.2
• /
• pp.53-58
• /
• 2017

This paper presents the design and fabrication of a planar nano-diffraction grating for an integrated miniature spectrometer module. The proposed planar nano-diffraction grating consists of nonuniform periods, to focus the reflected beams from the grating's surface, and an asymmetrical V-shaped groove profile, to provide uniform diffraction efficiency in the wavelength range from 400 to 650 nm. Also, to fabricate the nano-diffraction grating using low-cost UV-NIL technology, we analyzed the FT-IR spectrum of a uvcurable resin and optimized the conditions for the UV curing process. Then, we precisely fabricated the polymeric nano-diffraction grating within 5 nm in dimensional accuracy. The integrated spectrometer module using the fabricated polymeric planar nano-diffraction grating provides spectral resolution of 5 nm and spectral bandwidth of 250 nm. Our integrated spectrometer module using a polymeric planar nano-diffraction grating serves as a quick and easy solution for many spectrometric applications.

• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.294-300
• /
• 2006

We fabricated the distributed feedback (DFB) InP/InGaAs/InP grating structures on InP (100) substrates by metal-organic chemical vapor deposition, and their structural properties were investigated by atomic force microscopy and scanning electron microscopy. Self-assembled InAs/InAlGaAs quantum dots (QDs) were grown on the InP/InGaAs/InP grating structures by molecular beam epitaxy, and their optical properties were compared with InAs/InAlGaAs QDs without grating structure. The duty of the grating structures was about 30%. The PL peak position of InAs/InAlGaAs QDs grown on the grating structure was 1605 nm, which was red-shifted by 18 nm from that of the InAs/InAlGaAs QDs without grating structure. This indicates that the formation of InAs/InAlGaAs QDs was affected by the existence of the DFB grating structures.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.9
• /
• pp.624-633
• /
• 2001

Influence of the grating half-period fluctuation on the normalized coupling coefficient has been studied by an effective index transfer matrix method in quarter wavelength shifted(QWS) DFB lasers. The laser facets are assumed to be perfectly antireflection coated, and the period fluctuation is modeled by two correlated Gaussian random variables. In the presence of the random fluctuation in the grating period, effective normalized coupling coefficient is reduced because the in-phase feedback strength Is weakened. We have shown that the normalized coupling coefficient determined from the side mode spacing is less than the effective coupling coefficient, and the normalized coupling coefficient determined from the mode spacing or spontaneous emission spectrum does not properly represent the feedback strength of the grating.

• Korean Journal of Optics and Photonics
• /
• v.6 no.2
• /
• pp.108-114
• /
• 1995

규칙적인 간격이 $M\timesN$ 이차원패턴과 임의 모양 빔 스폿을 발생시키기 위해 일반적인 이차원 Dammann 격자보다 재구성 에러가 작고, 높은 효율을 보이는 줄무늬형 격자를 설계하였다. 회절효율은 일반적인 이차원 Dammann 격자의 효율보다 평균 15-20% 정도 높은 60% 이상을 얻었다. 설계된 격자는 컴퓨터 시뮬레이션을 통해 회절특성을 확인하였으며 우수한 패턴 발생 결과가 확인되었다. $3\times3에서 11\times11$까지의 규칙적인 스폿 배열과 문자열에 대한 효율, 계산 시간 및 표준편차를 비교분석하였다.

• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.16-19
• /
• 1992

The Fourier transform spectra of a grating have been employed to determine the refractive index of a simple lens. The shearing interferometric technique is used for collimation testing of the expanded laser beam and for determining the exact focal plane. The slit attached to micro X-Y translator has been used to measure the distance between two sucessive diffraction orders in the back focal plane of the test lens. The experimental equipment is described and results are presented.

• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.348-353
• /
• 1999

Ray-optics approach based on the rigorous coupled wave theory, called by the rigorous ray-optics method (RROM), is developed for the calculation of couling coefficients of waveguide grating devices. The coupling coefficients of several grating structures, such as rectangular, sinusoidal, triangle, and trapezoidal shapes, are determined by the RROM, and they are compared with those obtained by conventional methods of the ray-optics method (ROM) and the coupled mode method (CMM). In the case of rectangular gratings, the coupling coefficients is evaluated in detail by various depths and duty-cycles of the grating. We have found that the RROM gives more exact solutions for the coupling coefficients of even arbitrary shapes of diffractive waveguide grating devices than the other conventional methods.