• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.30-44
• /
• 2021

Experimental investigation of counter-rotating propellers is subject to multiple time and cost constraint because of additional design parameters unlike single propeller. Also, a lot of computing time and resources are required for numerical analysis due to consideration of the interference between the upper and lower propellers. In the present study, numerical simulations were conducted to investigate the hover performance of counter-rotating propellers by using actuator method which is considered to be time-efficient. The accuracy of the present numerical methods was validated by comparing the ANSYS Fluent which is commercial CFD code. The axial spacing and rotational speed were selected as the analysis variables, and the aerodynamic performance was obtained under various conditions. Based on the obtained results, the Figure of Merit (FM) of single propeller and counter-rotating propellers and a prediction factor which enables prediction of counter-rotating propeller performance using a single propeller were derived to evaluate availability of the actuator method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.376-383
• /
• 1996

보(beam)는 기계 구조 및 항공 우주 구조물의 기본적인 요소로서, 특히 큰 동적 거동을 하는 경우는 비선형성이 두드러지게 나타나는 것으로 알려져 있고[4], 헬리콥터의 회전날개(rotor blade)나 두께가 얇은 고속회전 축등의 경우에는 비틀림(torsion)과 굽힘(bending) 운동이 비선형 연성되어 나타나게 된다. 이러한 비선형 연성 효과를 갖는 경우에는 운동의 양상이 복잡하게 전개된다. 따라서 본 연구에서는 비선형 연성운동이 생기는 이러한 단순 외팔보에 대해 비선형 진동 특성을 파악하고 각 비틀림(internal resonance)현상[5]에 따른 정상상태 진폭 응답의 해석을 그 목적으로 한다.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.230.1-230.1
• /
• 2012

본 논문에서는 대구경 광학탑재체의 조립, 정렬 및 시험에 사용되는 고정밀, 고안정 짐발장치의 개발에 대해서 소개하고자 한다. 광학탑재체의 광학시험을 위해 사용되는 짐발장치는 광축높이를 유지하기 위해서 높이조절이 가능해야하고, 조립과정과 광학시험과정 그리고 시험 후 광학탑재체를 짐발 장치로부터 분리하기 위해 수평상태와 수직상태로의 회전이 가능해야 한다. 광학측정 시험과정 중에 결상위치의 미세한 조절을 위해 광학탑재체를 수평상태에서 상하좌우 정밀한 회전이 가능해야한다. 우주궤도환경 하에서 성능측정을 위해 열진공체임버 안에서의 광학시험이 필요하므로 짐발장치를 구성하는 재질은 모두 진공사용이 적합한 것이어야 한다. 광학측정 중에 측정설비주변에서부터 인가된 외란은 광학시험과 같은 민감한 시험에서는 철저하게 제거되어야 하는데, 이와 관련하여 짐발장치의 광학측정시험형상에서의 고유진동수와 같은 동적 특성도 설계과정에 반영하여 안정적인 측정 장치가 되도록 고려되어야 한다.

• Journal of Astronomy and Space Sciences
• /
• v.8 no.1
• /
• pp.85-98
• /
• 1991

Geomagnetism was used to control the attitude of the small scientific satellite at low altitude in sun-synchronous orbit. First, we analyzed the telemetry data. The rotation state of the satellite, can be known from the magnitude and variations of the magnetic field which is measured from the 3 axis magnetometer. In axisymmetric case, it is possible to control the attitude of the satellite by changing the rotation velocity of each 3 axis. The algorithm and the program were developed to calculate the supply time of the current operating the magnetorquer. This attitude control can be applied when the satellite is in tumbling motion and after passive control is attained by the Gravity gradient boom.

• Journal of Astronomy and Space Sciences
• /
• v.6 no.1
• /
• pp.17-28
• /
• 1989

The classical solar wind theory proposed by Parker(1963) explains well the dynamics of the wind pheonomena such as stellar wind and accretion disk. While the stellar wind system like the solar wind has the spherically symmetric wind structure, there are various jet phenomena which collimate the system into the narrow space. We can find these dynamical structures in SS433, in the optical jet of M87, and around the active galactic nulei. We present the dynamical structure of the jet system in disks, which conserves the angular monetum, with the Keplerian rotation and the strong relation between the geometrical cross section and the physical change of the jet stream on the basis of the hydrodynamic equations.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.260-267
• /
• 2005

An electronic spark ignition unit has been developed for gasoline for small UAV. The unit is programmable to adjust the optimal ignition advance angle in accordance with rpm and intake pressure. Initial advance angle and the position of Hall sensor on the engine can be set from PC via serial interface. The results are expected to be valuable core technology of powerplants in developing small UAV's.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1139-1145
• /
• 2008

numerical study on the coupled fluid-structure for a rotor blade in hover was conducted. Computational fluid dynamics code with enhanced wake-capturing capability is coupled with a simple structural dynamics code based on Euler-Bernoulli's beam equation. The numerical results show a reasonable blade structural deformation and aerodynamic characteristics.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.257-266
• /
• 2004

A three node triangular element with drilling rotations incorporating improved higher-order zig-zag theory(HZZT) is developed to accurately assess the stress distribution through thickness of the laminated plate and analyze the vibration of pretwisted composite plates with embedded damping layer. Shear force matching conditions are enforced along the interfaces between the embedded damping patch and the border patch. The natural frequencies and model loss factors are calculated for cantilevered pretwisted composite blade with damping core with the present triangular element, and compared to experiments and MSC/NASTRAN using a layered combination of plate and solid elements.

• Journal of Aerospace System Engineering
• /
• v.9 no.1
• /
• pp.7-11
• /
• 2015

최근 무인기와 초소형비행체를 위한 프로펠러 연구수요가 증가하고 있다. 일반적인 프로펠러와 다른 점은 저 레이놀즈수 유동조건에서 구동된다는 점이다. 본 연구는 저 레이놀즈수 유동조건에서 비행하는 인간 동력 항공기를 위한 프로펠러 공력설계 및 성능해석에 관한 연구다. 저 레이놀즈수 유동조건에서 발생하는 공력천이현상을 고려한 3차원 공력특성 변화를 정확히 반영하지 못하는 상용 프로그램의 단점을 보완하여 프로펠러 공력설계 및 성능해석이 가능한 프로그램을 개발했다. 개발된 프로그램으로 인간 동력 항공기 설계요구조건에 충족하는 프로펠러 공력설계 및 성능해석을 수행하였다. 또한 프로펠러 회전수와 장착각도 변화에 따른 성능변화를 예측하여 비행당시 상황에 따라 비행 가능한 성능출력이 가능하도록 하였다.

• Journal of Aerospace System Engineering
• /
• v.2 no.1
• /
• pp.1-6
• /
• 2008

In this paper, full body modeling and analysis of nose and main landing gear's characteristics of a helicopter are performed using the dynamics analysis program ADAMS. Also, when land limiting about helicopter body's degree-of-freedom, compared the characteristics. In the case of helicopter, because there are a lot of dangerous missions under flight condition that is disadvantageous than fixed wing airplane, need more detailed research for a helicopter.