• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.1
• /
• pp.175-181
• /
• 2010

The three truss models(equilibrium truss model, Mohr compatibility truss model, and the soften truss model) based on a rotating angle is called the rotating-angle model. The three rotating-angle models have a common weakness: they are incapable of predicting the so-called "contribution of concrete". To take into account this "contribution of concrete", the modern truss model(MCFT, STM) treats a cracked reinforced concrete element as a continuous material. By combining the equilibrium, compatibility, and the softened stress-strain relationship of concrete in biaxial state, MTM is capable of producing the nonlinear analysis of reinforced concrete structures composed of membrane element. In this paper, an efficient algorithm is proposed for the solution of proposed model incorporated with failure criteria. This algorithm is used to analyze the behavior of reinforced membrane element using the results of Hsu test.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.105-113
• /
• 1995

A mechanical actuator to generate adjustable force ants its active control algorithm to minimize ship structural vibration are developed. The algorithms comprise initial algorithm which determines optimal phase and force magnitude of the actuator using the variation of vibration response according to the phase difference between the main engine and the actuator, and regulating algorithm which performs continuous optimal control to track the change of the engine speed. This control system can be applied without any prior identification for the dynamic characteristics of the controlled structure. In the control experiments for the deckhouse structural vibration of a 300,000 DWT crude oil carrier and a 2,270 TEU container carrier, the developed system showed good performance to reduce the vibration levels to $1/2{\sim}1/6$ of the uncontrolled levels.

• Geophysics and Geophysical Exploration
• /
• v.23 no.4
• /
• pp.243-252
• /
• 2020

To share an understanding of trajectory measurement in surveys using borehole, this tutorial summarizes the relevant mathematical principles of the borehole deviation survey based on coordinate transform. For uncased or open holes, calculations of the azimuth-deviation-tool face rotation using three-component accelerometer and magnetometer measurements are summarized. For the steel-cased holes, calculations are based on the time-derivative formula of the coordinate transform matrix; yaw-pitch-roll angles through time are mathematically determined by integrating the threecomponent angular velocity measurements from the gyroscope while also removing the Earth's rotation effect. Sensor and data fusion to increase the accuracy of borehole deviation survey is explained with an example of the method. These principles of borehole deviation surveys can be adapted for attitude estimation in air-borne surveys or for positioning in tunnels where global positioning system (GPS) signals cannot be accessed. Information on the optimization filter that must be incorporated in sensor fusion is introduced to help future research.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.2
• /
• pp.145-152
• /
• 2010

This study evaluated the fatigue degradation in a SUS316L specimen using the nonlinear ultrasonic method. The nonlinearity of the ultrasonic wave was estimated by a relative nonlinear parameter defined as the ratio of the amplitudes for the fundamental wave to the second harmonic wave. In the experiment, a measurement system with contact transducers was constructed; reliable measurements were assured by keeping measurement conditions consistent and reducing extra harmonics generated in the measurement system. Two types of SUS316L specimen were used in experiments; a rotating bar fatigue specimen and a tensile fatigue specimen. The fatigue condition used was high cycle fatigue. The former specimen had a cylindrical shape and was used to observe the change in the nonlinear parameter after fatigue accumulation in a specimen. The latter was a plate-shaped specimen and was used to confirm the change in the nonlinear parameter at the position where the fatigue stress was concentrated. The measured nonlinear parameter showed a strong correlation to the damage level in both fatigue tests.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.2
• /
• pp.247-254
• /
• 2005

The objective of this study is to compare the chemical properties of red ginseng, white ginseng, and extruded ginseng. Six kinds of samples were prepared and examined their chemical components. The comparison among crude ash, crude lipid, and total sugar resulted insignificant difference. White ginseng had lower content of reducing sugar than those of extruded ginseng and red ginseng. Total amino acid was found relatively low in treatment A (sliced whole root and dried at 7$0^{\circ}C$). Total amino acid of treatment C (extruded dry whole root ginseng slices, moisture content 30%, barrel temperature 11$0^{\circ}C$, and screw speed 200 rpm) was higher than that of treatment B (extruded dry whole root slices, moisture content 25%, barrel temperature 11$0^{\circ}C$, and screw speed 200 rpm). Crude saponin of treatments A, B, C, D (white ginseng with skin), E (skinless white ginseng), and F (red ginseng) were 4.02, 4.77, 4.12, 3.56, 3.25, and 4.02%, respectively. Ginsenoside was contained similarly as crude saponin. The amount of ginsenoside in the treatment of A, B, C, D, E, and F was recorded respectively at 6.031, 8.108, 6.876, 7.978, 5.591, and 9.834 mg/g. A specific component in red ginseng, $R_{g3}$ was detected in treatment F. Maltol was detected in treatment Band F. Acidic polysaccharide was increased 2∼3% by extrusion process. In conclusion, extruded ginseng had similar components to those of red ginseng.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.12 s.354
• /
• pp.8-14
• /
• 2006

This paper proposed noise insensitive 4*4 mid frequency-OCT (MF-DCT) focus measure operator. Proposed operator enhanced low power 8*8 MDCT operator to have 4*4 rotationally same form for Gaussian noise. MF-DCT operator acting like band-pass filter suppresses both low-frequency signal useless for focus measure and high-frequency signal affected by impulsive noise. Also it is proved to be linear because it uses the energy of band-pass filtered signal as focus measure. Experimental result shows its superiority by comparing AUM with traditional operators.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.36-48
• /
• 2007

This paper proposed 3D keyframe animation using orientation interpolator. 3D keyframe animation consists of a number of transform nodes that have geometrical node of initial model and several interpolator nodes that represent the object moving. In the proposed algorithm, we randomly selects transform nodes with orientation interpolator node and performs to resample quaternion components for haying uniform key time. And then, watermark bits are embedded into quaternion components with large rotation angles. Experimental results verified that the watermark embedded by the proposed algorithm had good robustness against geometrical attacks and timeline attacks and also PSNR of keyvalue in orientation interpolator node is above 42dB.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.92-100
• /
• 1995

In this study, the bearing defects were modeled and the vibration of ball bearing faults was presented for the defective pattern. The vibration signal was measured for the single and multiple defected ball bearing at the various defect positions and rotation speed, and then the signal components using the HFRT(high frequency resonance technique) were analyzed by FFT. The experimental data analysis has shown that the frequencies generated in the single or multiple defected ball bearings appear with the characteristic defect frequency and harmonics of ball pass frequency peak. Signal processing by HFRT makes it possible not only to detect the presence of a defect but also to diagnose the defect part of the bearing.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.1
• /
• pp.97-102
• /
• 2009

In order to obtain a non-toxic and more active and stable microorganism-produced tyrosinase inhibitor, we isolated actinomycetes F-97, a producer of tyrosinase inhibitor, from soil. The aerial hyphae of this strain were gray in color with tree types. Under the microscopic examination, the isolate formed a spiral aerial spore mass with a smooth surface. The analysis of cell wall acid hydrolysate of the isolate revealed the presence of LL-diaminopimelic acid(LL-DAP). No specific sugar was detected. From these results and the cultural and physiological characteristics described in the Bergey's Manual, actinomycetes F-97 was identificated as, or best-matched to, Streptomyces aburaviensis.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.1
• /
• pp.31-36
• /
• 1993

Na-Fe Tourmalene ($NaFe_3Al_6B_3Si_6O_{27}F_4$)single crystals were grown by FZ method. The Growth conditions are counter rotation 20~30rpm, growth rate 1~5mm/hr in the atmospheric environment. The transition elements as Fe(in this research), Mn, Co, etc, are exist in the theoretical fomulae so that dopants were not added. The feed rod was sintered between $1000^{\circ}C$ and $1l00^{\circ}C$, but at higher temperature, it was difficult to manufacture the feed rod because of evaporation of the elements such as F. As grown crystals had a black color and the length of 50~60mm, the diameter of 5~6mm. X-ray powder diffraction pattern indicated that the composition of the feed rod was right to the Tourmaline composition. By FT-IR spectra, the state of bonding of each element was charaterized.