• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.161-170
• /
• 1998

기존에 건설된 교통시설의 운영효율을 극대화하기 위한 지능형 교통체계의 한 분야인 ATIS는 도로를 이용하는 통행자에게 편리성을 제공하는 동시에 도로를 효율적으로 운영할 수 있는 정보체계이다. ATIS 체계하에서 통행자에게 신뢰성 있는 정보를 제공하기 위해서는 교차로서의 회전에 의한 지체를 정확하게 반영함은 물론이고 실시간으로 변화하는 교통상황을 반영할 수 있는 동적인 최단경로 탐색 알고리즘이 요구된다. 하지만 기존에 발표된 동적인 최단경로 탐색 알고리즘은 회전에 대한 정보를 반영하지 못하며 정적인 최단경로 탐색 알고리즘은 회전에 대한 정보를 반영하지 못하며 정적인 탐색알고리즘 조차 회전에 대한 정보를 정확히 반영하지 못한다. 본 연구에서는 이러한 이유에서 알고리즘 내부에서 회전을 반영하기 위해 수정형 덩굴망 알고리즘의 표지기법을 이용하여 동적인 최단경로 탐색알고리즘을 개발하였다. 본 연구에서 개발한 동적 최단경로 탐색 알고리즘은 정적인 상태의 수정형 덩굴망 알고리즘에 시간에 따라 변화하는 교통상황을 반영하기 위해 시간에 대한 변수를 추가하였다. 이렇게 해서 알고리즘은 시간대별로 변화하는 통행시간을 고려하여 최단 경로를 탐색하게 되며 출발시점을 기준으로 표지를 설정하여 모든 앞선 시간에 대해 경로를 고려하도록 하였다. 매 단계에서 전 노드를 추적하여 회전에 관한 정보를 반영하도록 하였다. 따라서 본 연구에서 개발한 최단경로 탐색 알고리즘은 교차로에서의 회전에 대한 정보와 통행금지 등을 정확히 반영하며 실시간으로 변화하는 통행시간을 반영함으로써 신뢰성 있는 노선 정보를 ATIS를 이용하는 통행자들에게 제공하는데 활용될 수 있는 기법이다.적으로 세부적 차종분류로 접근한다.의 영향들을 고려함으로써 가로망 설계 과정에서 가로망의 상반된 역할인 이동성과 접근성의 비교가 가능한 보다 현실적인 가로망 설계 모형을 구축하고자 한다. 지금까지 소개된 가로망 설계모형들은 용량변화에 대한 설계변수의 형태에 따라 이산적 가로망 설계 모형과 연속적 가로망 설계모형으로 나뉘어지게 된다. 본 논문의 경우, 계산속도의 향상 측면에서는 연속적 가로망 설계 모형을 도입할 수 있지만, 이때 요구되는 도로용량이 이산적인 변수(차선 수)로 결정되어야만 신호제어 변수를 결정할 수 있기 때문에, 이산적 가로망 설계 모형이 사용된다. 하지만, 이산적 설계모형의 경우 조합최적화 문제이므로 정확한 최적해를 구하기 위해서는 상당한 시간이 소요되며, 경우에 따라서는 국부 최적해에 빠지게 된다. 이러한 문제를 극복하기 위해, 우선 이상적 모형의 근사화, 혹은 조합최적화문제를 위해 개발된 Simulated Annealing기법의 적용, 연속적 모형의 변수를 이산화하는 방법 등 다양한 모형들을 고려해 본 뒤, 적절한 모형을 적용할 것이다. 가로망 설계 모형에서 신호제어를 고려하기 위해서는 주어진 가로망에 대한 통행 배정과정에서 고려되는 통행시간을 링크통행시간과 교차로 지체시간을 동시에 고려해야 하는데, 이러한 문제의 해결을 위해서 최근 활발히 논의되고 있는 교차로에서의 신호제어에 대응하는 통행배정 모형을 도입하여 고려하고자 한다. 이를 위해서 지금까지 연구되어온 Global Solution Approach와 Iterative Approach를 비교, 검토한 뒤 모형에 보다 알맞은 방법을 선택한다. 차량의 교차로 통행을 고려하는 perf

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.53-66
• /
• 2017

In order to improve traffic flow and vehicular safety, installation of roundabouts is encouraging recently. Roundabouts are generally installed at which traffic flow and pedestrian flow is relatively low intersections. Roundabouts reduce vehicle speed, minimize vehicle weaving, and reduce critical conflict points. For these reasons, roundabouts are generally operated unprotected pedestrian crosswalk, thus a shortcoming for pedestrian safety always exists at roundabouts. The purpose of this study is developing a dynamic signal metering algorithm for traffic and pedestrian at four-way-approach with two-lane roundabouts in which three different operation algorithms(fixed-time pedestrian, vehicle signal metering, and vehicle and pedestrian signal metering) are suggested and its performance is tested by using VISSIM. The results of the fixed pedestrian signal operation show that there is a big average delay increase in general and that increases up to 51.4 seconds/vehicle(42.5%) when the total number of approaching vehicle is 3,800 vehicle/hour. However, the results of the simultaneous dynamic signal metering operation for the vehicle and pedestrian crossing with push button show that there is a substantial average delay reduction up to 40.6 seconds/vehicle(42.7%) when the total number of approaching vehicle is 3,000 vehicle/hour.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.27-35
• /
• 2009

The roundabout was developed in the United Kingdom to rectify problems associated with these traffic circles. In 1966, the United Kingdom adopted a mandatory "give-way" rule at alt circular intersections, which required entering traffic to give way, or yield, to circulating traffic. However, the roundabout used in United States or Europe do not common use in Korea. The purposes of the study is to comparatively analyze the effectiveness of roundabout. In pursuing the above, this study designs the scenarios which can reflect the directional traffic volumes, and analyzes the average control delay of roundabout and 4-leg signalized intersection by SIDRA. The main study results are as follows. First, when the entering traffic volume are less than 2,000pcph, the single-lane roundabout is analyzed to be more effective than 4-leg signalized intersection. Second, when the entering traffic volume are less than 3,200pcph, the double-lane roundabout is evaluated to be more effective than 4-leg signalized intersection. Third, which is installed left and right turn lane at intersection, area for the roundabout is analyzed to be less than that for general intersection area.

• Journal of Korean Society of Transportation
• /
• v.26 no.1
• /
• pp.145-153
• /
• 2008

Existing shortest-path algorithms mainly consider a single attribute. But traveler actually chooses a route considering not single attribute but various attributes which are synthesized travel time, route length, personal preference, etc. Therefore, to search the optimal path, these attributes are considered synthetically. In this study route searching algorithm which selects the maximum utility route using discrete choice model has developed in order to consider various attributes. Six elements which affect route choice are chosen for the route choice model and parameters of the models are estimated using survey data. A multinomial logit models are developed to design the function of route choice model. As a result, the model which has route length, delay time, the number of turning as parameter is selected based on the significance test. We use existing shortest path algorithm, which can reflect urban transportation network such as u-turn or p-turn, and apply it to the real network.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.217-230
• /
• 2002

본 연구는 민감도 분석을 통한 다지교차로의 효용성 분석 연구로 신호교차로, Roundabout, 그리고 Modern Roundabout의 특성을 고찰하고 교통류의 특성에 따른 민감도 분석을 통한 교차로 형태를 검토하는 것에 그 목적을 두고 있다. 이를 위해, 첫째, 신호교차로와 Roundabout의 특성과 사례를 고찰하였다. 둘째, 4지교차로와 5지교차로의 교통류 특성별로 교통량을 산정하여, TSIS Tool을 이용한 분석을 통해 교통류 특성별 신호 교차로와 Round about의 민감도를 비교하였다. 셋째, 민감도 비교를 통한 교통류 특성별 효율적인 교차로 형태를 도출하였다. 4지교차로의 경우, 첫째, 일반적으로 V/C비의 변화에 대해 V/C비가 0.7이하일 때는 Roundabout가 V/C비가 0.7을 초과할 때는 신호교차로가 효율적인 것으로 나타났다. 둘째, V/C비별 회전교통량의 변화와 회전교통량 변화별 V/C비 변화에서도 V/C비의 변화의 분석결과와 비슷한 양상을 보였다. 5지교차로의 경우, 첫째, 4지교차로와는 달리 전반적으로 신호교차로 보다는 Roundabout가 더 효율적인 교차로 형태로 나타났다. 둘째, V/C비별 회전교통량의 변화와 회전교통량 변화별 V/C비 변화에서는 V/C비가 0.8을 초과하고 우회전교통량비가 30%∼40%인 경우에 신호교차로가 조금 더 효율적인 것으로 나타났다.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.143-150
• /
• 2011

Roundabouts, which belong to traffic circles, are intersections which are similar to the existing rotary form. Roundabouts recently have been constructed all around the world. And interests in roundabouts are increasing in Korea. However, there are lacks of research on pedestrian volume which has a great influence on operation efficiency of roundabouts in urban area. Therefore, this study suggests efficiency analysis and pedestrian signals in roundabouts according to the pedestrian volume. First, VISSIM simulation was organized to analyse volume of one lane roundabouts in urban area. Second, average delay of intersections was calibrated by VISSIM simulation dividing signalized intersections and non-signalized intersections depending on pedestrian volume. Finally, this study showed that roundabouts are suitable when pedestrian volume was under 200person/hr and traffic circles with a pelican signal are suitable when pedestrian volume was over 200person/hr. And when pedestrian volume and traffic volume are over 600person/hr and 1,500vph respectively, fixed signalized intersections fit well.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.305-316
• /
• 2013

To find out if modern roundabout is still effective under drivers behavior and driving conditions in Busan Metropolitan City, the effects before and after introduction of roundabout were analyzed. According to analysis on velocity profile at roundabout, velocity deviation decreased, and average vehicle speed was close to design speed. As a result, it has been confirmed that most roundabouts were properly built. In terms of traffic operation, average vehicle speed improved by 87.2% when a traffic intersection was replaced by a roundabout. therefore, it has been found out that the introduction of roundabout has a positive effect on increasing vehicle speed by reducing traffic congestion. In addition, annual benefits expected from the replacement from a traffic intersection to a roundabout were KRW 872 million as follows; KRW 410 million in traffic communication, KRW 39 million in transportation safety, KRW 255 million in energy saving, KRW 95 million in reduction of air pollution and KRW 73 million in reduction of traffic signal installation cost. In other words, if 10% (193 spots) of all traffic intersections (1,926 spots in total) in Busan City are replaced by roundabouts, the municipal authority would be able to save about KRW 168.3 billion. According to analysis on the benefits expected from the installation of roundabouts compared to the investment cost for traffic intersections, about KRW 679 million could be saved per roundabout. Considering 10% of all traffic intersections in the City of Busan, about KRW 131 billion could be saved annually. The traffic accidents in roundabout usually occur because drivers aren't aware of right-of-way rules. Once the right-of-way rules settle, the number of traffic accidents would significantly decrease. In addition, it is urgent to promote education and campaign for drivers, pedestrians and bikers on the roundabout.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1299-1306
• /
• 2014

Recently, there are many roundabouts installation works which are ordered to provide convenient transportation to road users as well as to eliminate traffic accidents and traffic delays. This study propose an approximate construction cost estimation model for early stages of roundabout construction. The model is designed considering the conditions of the early stage roundabout construction sites in Jeju. The regression equation of approximate construction cost was derived through regression analysis of 25 design data of roundabout construction in Jeju, and it was analyzed to have a high prediction accuracy. Finally, results verifies high prediction accuracy of the derived regression equation. Difference between the estimation cost and the design cost was only 2.3%, 3.7%, and 5.8% that verifies the high accuracy of the proposed approximate construction cost estimation model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1111-1121
• /
• 2015

Roundabouts face a congestion problem when there are unbalanced traffic conditions, especially during peak times. The congestion at roundabouts results in long delay times and low level of service. Some research has addressed congestion problems of the metering roundabout, however, few studies have focused on the congestion issues of the double signals metering roundabout. This research bridges this gap through analyzing the congestion issues of the Old Belair double signals roundabout in Adelaide. The research proposes a new analysis method based on a four-nodes intersection in order for double signals roundabout analysis to be carried out as follows: firstly, at the modeling stage, a connection of four individual intersections, adjustment of lane geometry, input of directional traffic volumes, priority and phase time set up are proposed. Secondly, for calibration, PFF, critical gap, follow-up headway and extra bunching values have been applied. The results from the analysis show that the new method is able to analyze the delay time, level of service, degree of saturation and allow for further analysis.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.53-62
• /
• 2009

The purposes of the study is to comparatively analyze the applicability of roundabout to the diamond interchange. In pursuing the above, this study give the particular attentions to comparing the performances of roundabout with those of TWSC and signalized intersection based on the aaSIDRA software. The main study results are as follows. First, when the entering traffic volumes(ETV) are more than 480pcph, the single-lane roundabout is analyzed to be more effective than 4-leged unsignalized intersection and when ETV are $480{\sim}1,880pcph$, double-lane roundabout is analyzed to be more effective than 4-legged intersection Second, when ETV are more than 980pcph at the single-lane intersection and $1,600{\sim}3,680pcph$ at the double-lane intersection, roundabout is analyzed to be more effective than other 3-legged intersections. In summary, when the roundabout installs at the interchange, it is important to consider the range of ETV.